User manual

E-39
Using the microSD Hard Cover (IT-G500-GC21E only)
Use the procedure below to attach the “microSD Hard Cover”.
Attaching the microSD Hard Cover to the Handheld Terminal
1. Loosen the screw for the microSD card cover supplied with the Handheld Terminal
and remove the cover.
2. Attach the microSD Hard Cover by
sliding it onto the Handheld Terminal.
3. Use your fi nger to push the cover in so that it fi ts tightly against the waterproof seals,
checking that it sits fl ush with the Handheld Terminal body.
4. Fix the microSD Hard Cover in place
using the screw provided.
Important!
Failing to attach the microSD Hard Cover correctly could result in water
leakage.
When attaching the microSD Hard Cover, check that the waterproof seals are
free from any cracking, splitting or other damage.
•
•