Specifications

65
Flipping Image
In the IT-9000, the direction of flipping image on the screen is determined in accordance with
OS’s screen flip setting. For the specifications of flipping screen image, refer to “Camera
Rotation” in MSDN library.
Table 2.50
Item Image Setting
Preview display
− (Flip image in clockwise)
− No flip (default)
− 90 degree (OS. When specifying image to flip 90 degree
in clockwise.)
− 270 degree (OS. When specifying image to flip 90
degree in counterclockwise.)
Flipping
image
Captured image
− (Flip image in clockwise)
− No flip (default)
− 90 degree (OS When specifying image to flip 90 degree
in clockwise.)
− 270 degree (OS When specifying image to flip 90 degree
in counterclockwise.)
Adjusting Frame Rate
Frame rate which is output to preview display by the integrated camera module is adjusted
automatically in accordance with the surrounding brightness, not exceeding the maximum frame
rate. The camera module has the capability of setting the maximum frame rate. It is to set the
maximum frame rate in 4 grades output by the camera module in preview display. In capturing
movie, the maximum frame rate requires the software resource used for encoding. The more you
set higher frame rate, the more it takes time to encode and the program memory is needed.
Table 2.51
Parameter Setting Remarks
Max. frame rate = low
− When capturing movie
− Encode time = short
− Program memory required = small
Max. frame rate = ordinary
− When capturing movie
− Encode time = middle
− Program memory required = ordinary
Max. frame rate = high
− When capturing movie
− Encode time = long
− Program memory required = large
Maximum frame
setting
Max. frame rate = highest
− Not allowed to set for capturing movie.