Specifications

31
Bluetooth Connection Status
This is used for notification of Bluetooth connection establishment status which is controlled with
the System Library.
Table 2.18
Status Mode Specification Attribute
Connection established via Bluetooth ON in blue for 1 second, OFF for 2 seconds BT
Note:
Indication for scanning a bar code has the priority over other indications.
WLAN Connection Status
This is used for notification of WLAN connection establishment status which is controlled with
the System Library.
Table 2.19
Status Mode Specification Attribute
Connection established via WLAN ON in orange for 1 second, OFF for 2
seconds
WLAN
Notes:
• Indication for scanning a bar code has the priority over other indications.
• The indication color for WLAN status is the same with those used for WWAN and GPS
statuses.
User Definition
This indication mode is used for other notifications freely defined by the user. The ON/OFF state
and color to be lit can be controlled with the System Library.
Table 2.20
Status Mode Specification
Color selection from red, green, blue, orange, cyan and magenta. User definition
Programmable for ON and OFF time periods
Continuous ON time period 30 minutes (OFF when VDET is detected)
Note:
Indication for scanning a bar code has the priority over other indications.
WWAN Connection Status
This is used for notification of WWAN connection establishment status.
Table 2.21
Status Mode Specification Attribute
WWAN established ON in orange for 1 second, OFF for 2 seconds WWAN
Notes:
• Indication for scanning a bar code has the priority over other indications.
• The indication color for WWAN status is the same with those used for WLAN and GPS
statuses.