Specifications

218
3.26 USB Connection
This applet displays connection establishment with PC or other device in USB mode. It is also
used to change the connection related parameter settings.
Connect Status Tab
Figure 3.72
Can be connected to PC message appears in the tab when the terminal is connected to PC in
USB Client mode. Or, Can be connected to LAN or modem message appears when the
terminal is connected in USB Host mode.
Cable connection is prior to Cradle connection
Set this radio button effect to make connection by USB cable effective when USB cable is
connected to the terminal directly and terminal is on the cradle. The radio button is set effect by
default.
Cradle connection is prior to Cable connection
Set this radio button effect to make connection by the cradle effective when USB cable is
connected to the terminal directly and terminal is on the cradle.
Tab the OK button if you change above setting and wish to make it effective.
Connect Utility Tab
Figure 3.73