Specifications

206
• In order to make multiple settings at a time, tap OK button only after making all necessary
modifications.
Paper Type
In this field, set up the paper type to use for printing. This ensures that the specified paper can be
used to print characters with the optimum parameters.
Figure 3-54
From the list of paper types in the combo box, choose the paper to be used. The following five
paper types can be selected.
• F220VP (= Default)
• HA220AA
• AFP-235
• HW54SS
• ODT60TC-RAK
Printing Density
This field is used to set up the print density. There are 9 levels of print density that can be set up.
Move the slider knob to the right or left to modify the print density. If the slider knob is moved
to the left, the print density decreases, or if it is moved to the right, it increases. The default
setting is at the fifth gradation from the left.
Figure 3-55