Specifications

205
3.21 Setting Printer
This Printer Setup Tool is used to set up or modify the settings of various functions required
for printing. The Printer Setup Tool is stored in the Control Panel. Initiate it as necessary.
List of the settings
The following table shows a list of Printer Setup Tool setup items. Since these settings are stored
in the registry, they can be retained even if a normal reset is carried out. If there is a need to
forcibly initialize them, transmit the ESC initialization command to the printer or perform a
full-reset.
Table 3.5
Setting Description Remark
Paper Setup Specify the paper type. 5 kinds
Specify the print density. 9 levels Print Quality Setup
Specify the print speed. Quick, Slow (high quality),
Graphic
Specify the pre-heating. Enable/Disable Function Setup
Specify the “Continuous printing after error”. Enable/Disable
Specify the Marker Detection Begin/End Function Setup2
Specify the Splash Cover Error Control System/Application
Status Display Display the printer status. Displays and confirm the
printer status.
• The Printer Setup Tool functions
The functions are used to set up or modify the settings of various printer functions as required.
Initial Status
The tabs in Figures 3.51 - 3.53 display the initial status of the printer settings. The initial status to
be displayed is the latest status when the tabs are opened.
Figure 3-51 Figure 3-52 Figure 3-53
• To set the setting effect, tap OK button.
• If OK button is tapped, the setup conditions are automatically updated and the dialog screen
disappears.