CASIO IT-9000 Series Software Manual (Version 1.00) CASIO Computer Co., Ltd. Copyright ©2012. All rights reserved.
Table of the Contents Chapter 1. 1.1 1.2 Chapter 2. 2.1 2.1.1 2.1.2 2.1.3 2.1.4 2.1.5 2.1.6 2.1.7 2.1.8 2.1.9 2.1.10 2.1.11 2.2 2.2.1 2.2.2 2.2.3 2.2.4 2.2.5 2.2.6 2.2.7 2.2.8 2.3 2.3.1 2.3.2 2.4 2.4.1 2.4.2 2.4.3 2.4.4 2.5 2.5.1 2.5.2 2.5.3 2.5.4 2.6 2.6.1 2.6.2 2.6.3 2.6.4 2.7 2.7.1 Editorial Record Preview Product Overview Model by Feature Available Options Functions Basic Specifications Windows Mobile® 6.
2.7.2 2.7.3 2.7.4 2.7.5 2.7.6 2.8 2.8.1 2.8.2 2.8.3 2.8.4 2.8.5 2.8.6 2.9 2.9.1 2.9.2 2.10 2.10.1 2.10.2 2.11 2.11.1 2.11.2 2.11.3 2.11.4 2.11.5 2.12 2.12.1 2.12.2 2.12.3 2.12.4 2.12.5 2.12.6 2.13 2.13.1 2.13.2 2.13.3 2.13.4 2.13.5 2.13.6 2.13.7 2.13.8 2.13.9 2.13.10 2.14 2.14.1 2.14.2 2.14.3 2.14.4 Chapter 3. 3.1 3.
3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 3.24 3.25 3.26 3.27 3.28 3.29 3.30 3.31 3.32 3.33 3.34 3.35 3.36 3.37 Chapter 4. 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.
4.15 4.16 4.17 4.18 4.19 4.20 4.21 4.22 4.23 4.24 4.25 4.26 4.27 4.28 4.29 4.30 4.31 4.32 4.33 4.34 4.34.1 4.34.2 4.34.3 Chapter 5. 5.1 5.2 5.3 5.4 5.5 Chapter 6. 6.1 6.2 6.3 6.
Editorial Record Manual Version no. 1.
Preview The features and specifications described in this reference manual give you the functional detail of the software integrated in the IT-9000 series handheld terminals with Microsoft Windows Mobile® Version 6.5 OS.
1. Product Overview 1.1 Model by Feature The major features integrated in each model of the IT-9000 series are shown below. Table 1.1 Model no. Printer Image Scanner Yes Yes Yes Yes Yes Yes Yes MCR W-WAN GPS Yes Yes Yes Yes Yes - W-LAN (802.
1.2 Available Options The following dedicated options are available for IT-9000 series. Table 1.2 Option Cradle Battery Battery charger Product USB Cradle Ethernet Cradle Battery Pack Dual Battery Charger Cradle-type Battery Charger Car Mounted-type Battery Charger AC adaptor (for HA-L60IO, HA-L62IO, HA-L30CHG,) USB cable Cable Model no.
2. Functions This chapter describes about detailed specifications of the functions implemented in the terminal and the dedicated options. 2.1 Basic Specifications This chapter describes about the basic specifications of the functions implemented in the terminal. 2.1.1 Windows Mobile® 6.5 The terminal integrates Microsoft® Windows Mobile® Version 6.5 as its operating system. The operating system features with the following capabilities. • • • • • • • • • Windows CE 5.
2.1.2 Display Basic Specifications The VGA (480 x 640 dots) display mode is supported in the terminal. Table 2.
The functions of the System Library relevant to the Backlight Brightness are as follows. SysGetBLBattery : Retrieves brightness of the screen when the power is supplied by battery pack. SysSetBLBattery : Sets up brightness of the screen for the power source supplied by battery pack. SysSetBLExpower : Sets up brightness of the backlight for the power source supplied by external power. SysGetBLExpower : Retrieves brightness of the backlight when the power is supplied by external power.
Flipping Display Screen Flipping display screen at 90, 180 or 270 degree is supported. • The relevant functions of the System Library can be used to set up an angle to flip the screen in application. • With ChangeDisplaySettingEx() API function, flipping display screen at 90, 180 or 270 degree can be set in application. See Microsoft Help for detail about ExtEscape() and ChangeDisplaySettingEx() API functions. The functions of the System Library relevant to the Flipping Display Screen are as follows.
2.1.3 Touch Panel An input can be made to any portion of the touch panel. The touch panel has the following resolutions. Table 2.3 High Resolution Resolution • X direction Y direction X direction Y direction 480 dots 640 dots 240 dots 320 dots Capturing touch coordinates in X and Y directions and controlling the pointing are possible by application. Prior to using the touch panel for the very first time, calibrating the touch panel is required.
2.1.4 Keys Keyboard Layout The following is the keyboard layout employed in the terminal.
Key Assignments The following are the key codes and function assignments. Table 2.4 KEY Fn Control keys Input mode Operation ---- Character input mode C Function mode Character input mode BS Function mode MENU Character input mode Function mode ENT Character input mode Function mode ← Character input mode Function mode → Character input mode Function mode (hyphen ) Table 2.
F2 Character input mode F3 Function mode Character input mode F4 Function mode Character input mode Function mode Table 2.6a Program keys KEY Input mode Program Character input mode Key L Program Key R Function mode Character input mode Function mode 1 A a F 1 A a F 1 A a F Performs as F2 key. Performs as F2 key. Performs as F2 key. Performs as Shift and F2 key. Performs as F3 key. Performs as F3 key. Performs as F3 key. Performs as Shift and F3 key. Performs as F4 key. Performs as F4 key.
Table 2.
A A . (Decima l point) Function mode Character input mode Function mode F 1 A a F Performs as “W”, ”X”, ”Y” and ”Z” keys. Performs as “w”, ”x”, ”y” and ”z” keys. Start the application. Performs as “.” key. Performs as “@.,”’`:;~|” keys. Performs as “@.,”’`:;~|” keys. Performs as “-” key.
Switch Over Key Input Mode The “Fn”+”-“ key on the keyboard can be used to change the key input mode. The functions of the System Library relevant to the “Key Input Mode Switchover” are as follows. SysSetEnableKeyMode : Sets up “Enable” or “Disable” for key mode transition when the key input mode is changed SysGetEnableKeyMode : Retrieves the status of “Enable” or “Disable” for key mode transition when the key input mode is changed.
Enabling or Disabling Fn Key operation For keys that perform specialized operations while the key input mode has been set to Function mode, “Enable” or “Disable” can be set on each individual key in the registry below to control the operations. [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD] Or, using the SysSetFnKeyOperation function of the System Library can achieve the same control operation explained above. Table 2.
Enable or Disable Key Locks The System Library can be used to enable or disable the operations of keys except for the Power and Program keys. The functions of the System Library relevant to the “Permit or Prohibit Key Locks” are as follows. SysSetAllKeyLock : Sets up “Enable” or “Disable” for lock with specified key. SysGetAllKeyLock : Retrieves “Enable” or “Disable” status for lock with specified key.
2.1.5 Audio Basic Specifications WAV playback, voice recording and playback are supported. By using the Microsoft SoftwareMixer function, output sounds from multiple applications can be mixed and output (in 44.1 KHz, 16-bit stereo mixing). Voice Recorder is integrated in the terminal as the sound system application to make it possible to perform WAV file streaming playback and local file playback in HTTP.
2.1.6 Buzzer Sound Basic Specifications The buzzer sound in various modes such as scanning confirmation, alarm, warning, and other available sounds can be output via the integrated speaker. The sounds have four attributes and default values. Table 2.
2.1.7 Memory Management The high speed and large capacity RAM (MobileDDR 256MB) and FlashROM (OneNAND Flash 256MB) are integrated in the terminal. Although RAM has been used for RAM XIP (for OS), program memory (for program files to run) and object store (for storage of work data) in the previous Casio handheld terminals introduced in the past, non-volatile memory (FlashROM) is integrated to the Root folder in the terminal.
FlashDisk The FlashDisk has a total capacity of 256MB and is used for the below purposes. Boot area : Deploys the OS files to the RAM from the OS disk. OS disk/Kernel : Stores the OS files. Boot loader is deployed in the RAM at time of booting. User disk : A disk user can freely use. It comprises the RootDisk which is mounted in the system root folder and the FlashDisk. Spare : A substitution sector of the FlashROM • • • • • In the boot area, boot loader and etc.
2.1.8 Reset The role of the boot loader in Windows Mobile (OAL) is to boot the OS after initializing the hardware. On the terminal, it is possible to carry out the special performances with special keys operation as described in the figure below. BootLoader of IT-9000 BootSelector (Soft Rest(default)) IPL OS Loader (Power + C ＋ Reset) (Fn + C＋ ． + Reset) (Fn + − + ENT + Reset) OS Clear and Reload User Disk Clear Hard Reset Figure 2-3 To reset the terminal, there are several ways to carry out it.
User Disk Clean This operation is carried out if Fn and C and “.” keys are held down at the same time and then the reset switch is pressed for a period of one second or longer that formats the RootDisk and FlashDisk and initializes the RAM to the factory default and then reloads the OS files to the RAM. A message (see Figure 2.4 ) to confirm memory initialization appears. The R Program key is used to confirm the User Disk Clean.
2.1.9 Memory Corruption Check Checksum is carried out in order to detect whether the OS deployed in the memory is corrupted or not, and the OS is reloaded if it is necessary. Table 2.14 On Soft Reset Confirm the checksum Carried out On Full Reset, Hard Reset, User Disk Clean and Power-on Reset On Suspend and Resume (see notes) - OS load Carried out when error of checksum occurs.
2.1.10 LED Basic Specifications There are two LEDs integrated in the terminal, one on the right side (Indicator 2) for the user notification and the other (Indicator 1) for charging battery complete notification. Table 2.
Bluetooth Connection Status This is used for notification of Bluetooth connection establishment status which is controlled with the System Library. Table 2.18 Status Mode Specification Connection established via Bluetooth ON in blue for 1 second, OFF for 2 seconds Note: Indication for scanning a bar code has the priority over other indications. Attribute BT WLAN Connection Status This is used for notification of WLAN connection establishment status which is controlled with the System Library. Table 2.
GPS Connection Status This is used for notification of GPS connection establishment status. Table 2.22 Operation mode Specification Attribute GPS established ON in orange for 1 second, OFF for 2 seconds GPS Notes: • Indication for scanning a bar code has the priority over other indications. • The indication color for GPS is the same with those used for WLAN and WWAN statuses.
2.1.11 Vibration Basic Specifications The vibration can be set up for five different notifications. Table 2.23 Notification Alarm Warning Bar code scan complete Wireless incoming signal User definition Vibration Pattern Default Default Default Default User Setting ON or OFF ON or OFF ON or OFF ON or OFF ON or OFF Default OFF OFF OFF OFF OFF Vibration Interval The vibration interval can be set in two different patterns, the default setting and a user defined setting. Table 2.
2.2 CMOS Imager This chapter describes about detailed specifications of the CMOS Imager which is model dependant. See Table 1.1 for the CMOS Imager integrated models. X X 2.2.1 Basic Specifications The following industrial standard 1D symbologies are supported by the integrated CMOS Imager. Table 2.
GS1 DataBar 1 40 Always Enable Always Disable 1 28 Always Enable Always Disable Always Enable Always Enable Expanded (Standard) ISBT (note 1) Code32 (note 2) 9 Notes: 1. ISBT symbology is decoded as Code128 symbology. 2. To read Code32 symbology, set also Code39 symbology enabled. When Code32 is enabled, Code39 which consists of specific data is converted to Code32. Table 2.
Table 2.
2.2.2 Scanning Method Ordinary Read This function reads one bar code at a time and outputs the data. Ordinary, this read method is used. Multi-step Read This function continuously performs decoding as long as one of the R/L Trigger keys is held down. Once bar codes are decoded they are not read any more. This function is useful for reading all bar codes without repeating the same action when more than one bar code is printed on one slip.
The functions of the Imager Library relevant to the Scanning Method are as follows. IMGSetDecodeMode : Sets up scanning mode. IMGGetDecodeMode : Retrieves the scanning mode. IMGWaitForDecode : Carries out decoding symbol. IMGWaitForDecodeRaw : Carries out decoding symbol including its binary data.
2.2.3 Scanning Parameters Condition that allows scanning a symbology in specific modes can be set for each readable symbology. Readable Symbology Bar code symbologies that are enabled or disabled for scanning can be specified. If only specific symbologies are to be scanned, set “Enable” for scanning on these symbologies only and “Disable” on other symbologies. This reduces decode processing time and lowers error rate. The default is “Enable scanning on all the symbologies”. Readable Digits The no.
IMGSetEAN8 IMGGetEAN8 IMGSetHX IMGGetHX IMGSetIATA IMGGetIATA IMGSetITF IMGGetITF IMGSetISBT IMGGetISBT IMGSetMaxicode IMGGetMaxicode IMGSetMicroPDF IMGGetMicroPDF IMGSetMSI IMGGetMSI IMGSetPDF417 IMGGetPDF417 IMGSetQR IMGGetQR IMGSetRSS IMGGetRSS IMGSetTLC39 IMGGetTLC39 IMGSetUPCA IMGGetUPCA IMGSetUPCE IMGGetUPCE : : : : : : : : : : : : : : : : : : : : : : : : : : : : Sets up decode options for EAN8 symbology. Retrieves the decode options for EAN8 symbology.
2.2.4 Scan Result Notification The notification of the read completion of a symbol can be posted using one of the following two integrated devices. The buzzer sound level can be set up at the Control Panel. Table 2.
2.2.5 Expanded Features Decode Customize Function This function adjusts the scanning speed to facilitate scanning of hard-to-read symbols. • Decode Deliberation Levels The level of deliberation for scanning symbols can be set at five different levels. Setting the level to “Very Quick” or “Quick” limits symbols which can be decoded, but increases the decoding speed. Alternatively, setting the level to “Deliberate” or “Very Deliberate” allows many symbols to be scanned but slows down the decoding speed.
• Print Weight Adjust Function This function improves scanning bar codes comprised with thick or thin bars. The improvement can be selected in seven grades. In ordinary condition, the setting is not required to change. However, it is useful to change it if scanning a particular bar code is difficult. Thin 1 Default 2 3 4 Thick 5 6 7 Figure 2-6 The functions of the Imager Library relevant to the Print Weight are as follows.
Note that the area of the aimer is a reference. It ca be varied by factors such as distance between the bar code and the terminal or angle of emitting the aimer. The functions of the Imager Library relevant to the “Decode Window function” are as follows. IMGSetDecodeWindow : Sets up decode window area. IMGGetDecodeWindow : Retrieves decode window area.
Automatic Linking of Combined Symbols The CMOS Imager supports automatic linkage of multiple symbologies. When scanning symbols with the following combined symbols (see Table 2.61), the scanned data is stored in the internal buffer and all of the data from combined symbols or all scanned symbols is combined and output. Combined symbols can only be scanned when the decoding mode is set to “Ordinary Read” mode.
Image Capture Function This function is used to capture image data and save it as JPEG file. Using the function together with the JPEG Library, the captured image data is output as image data in either 2-gray scale or 256-gray scale. The captured image data can also be output in low resolution by reducing its size. The following table shows the reductions and sizes. Table 2.
Signature Index Function This function scans both symbol and signature at one time and outputs the symbol data and indexed signature at the same time. The position and size of a signature can be specified in the user application based on the position of the symbol. The function automatically corrects the up and down positions of the captured symbol in correspondence with the up and down positions of the image data even if it has been captured upside down or diagonally, and then outputs it.
Streaming Display Function This function sequentially displays an image while continuously operating the CMOS Imager. With the image capturing function in “ Image Capture Function ”, the streaming display function can be used to display image preview. X Table 2.35 Reduction Size 1/1 reduction X 1/1, 1/2, 1/4 188 x 120 pixels 1/2 reduction 1/4 reduction Partial extraction is possible.
Imager’s APO This function will shut down the power to the CMOS Imager automatically if it has not been used for a while. After activating the APO (Automatic Power OFF) function, the imager’s power can be turned on again if one of the following functions is invoked. The time period of the APO function can be set up in the range of 0 to 1,800 seconds. Specifying “0” will disable it. The power consumption by the imager can be curbed while the APO function is activating.
2.2.6 Configuration File The various settings made at “ Imager Setting ” of the Control Panel can be stored in an INI-type file and resumed. The configuration file storage location and its name are “\FlashDisk\System Settings\IMGSet.ini”. X X By calling IMGLoadConfigFile function, the content in the configuration file is deployed into the Imager, or the default values are used to initiate the Imager if there is no such the configuration file.
Setting for Scanning Bar Codes For each symbology, parameters that can define the scanning performances are specified with its individual symbology name in the section name. See Table 2.64 . X X Table 2.
List of the Default Settings for Bar Code Symbologies The below list shows the default settings and parameters for the 1D bar code symbologies. Table 2.
[QR Code] Enable=0 Min=1 Max=3500 [Aztec] Enable=0 Min=1 Max=3750 [Code 32] Enable=0 53 [TLCode39] Enable=0
Setting for Common Operations The settings in Table 2.66 are for the common operations not related to bar code symbology. X X Table 2.38 Item [PrintWeight] Section PrintWeight [Intensity] Section Aimer Illumination [Multi-step] Section ReadMode ReadTimes Separator Description Default Specify the calibration value for thickness of bars. Specify in the range of 1 to 7. 4 Specify the intensity of the Aimer. Specify of the intensity of the Illumination LED. Specify 0 or 100. Specify 0 or 100.
[Auto Power OFF] Section Auto Power OFF [Indicator] Section LED Buzzer Vibrator [Decode Window] Section Enable Left Top Right Bottom [Decode Reverse] Section Enable Imager’s APO timer Specify in the range of 0 to 1800 (in second), “0” disables APO, “1 to 1800” turns off the power to the Imager after the time period has elapsed. 0 Specify turning on the LED when scanning is complete.
2.2.7 Concurrent Use with Other Device Table 2.67 shows the concurrent use of decoder, streaming, capturing image of the CMOS Imager with other devices listed in the below table. Table 2.39 Other Devices Camera USB Bluetooth WLAN Concurrent Use Impossible. There may be a possibility, but it is not recommended to use the device concurrently. Possible. Possible. 2.2.
2.3 Digital Camera This chapter describes about detailed software specifications of the integrated digital camera (model dependant). The camera driver integrated in the IT-9000 series handheld terminals is compatible with the Windows Driver Model (WDM) of Microsoft. Application program runs on the terminal can utilize the camera functions by controlling DirectShow API. In this chapter, the properties of the DirectShow that can be set for the IT-9000 series handheld terminals are mainly explained.
2.3.1 Basic Specifications The terminal (model dependant) offers the following functions via the integrated digital camera module. Table 2.41 Item Recorded image file format (Still image capture/consecutive shooting) Size of captured still images Setting Parameter JPEG Portrait Width Height 1200 1600 960 1280 768 1024 600 800 480 640 240 320 Portrait Width Height 320 426 240 320 160 213 Mode UXGA Quad-VGA XGA SVGA VGA 1/4VGA Finder (preview) display Mode 4/9VGA 1/4VGA 1/9VGA Frame rate 15.
Preview Display This is for displaying an image in real time being captured by the camera. The following are image sizes and frame rates for preview display. Table 2.42 Item Screen size in preview display Frame rate Parameter Portrait Landscape Mode Width Height Width Width 4/9VGA 320 426 426 320 1/4VGA 240 320 320 240 1/9VGA 160 213 213 160 Each image size above can be magnified by “x1.0”, “x1.5”, or “x2.0”.
2.3.2 Capturing Images Capture Static Image and Save in File This function captures single static image and then outputs it in JPEG format file. Table 2.
JPEG File Option For the use of JEPG as output file, the options listed in the table can be set. Table 2.44 Parameter Quality (Compression rate) Baseline progressive Setting Quality = low (Compression rate = high) Quality = middle (Compression rate = middle) Quality = high (Compression rate = low) Quality = highest (Compression rate = lowest) Baseline Thumbnail function Progressive output function is not supported. Not supported.
Digital Zoom The digital zoom is a function used to cut out a part of image from the high-resolution image. The following image sizes and magnifications can be used for digital zoom shooting. Table 2.46 Digital Zoom Magnification 1/4VGA VGA SVGA XGA Quad-VGA UXGA x 1.5 Yes Yes Yes Yes No No x 2.0 Yes Yes Yes No No No Note: If shooting is performed in one of the modes marked as “No” in the table, shooting is made without digital zoom (“x 1.0”) effect.
Brightness Correction This is for correcting the brightness. “Brightness” referred to in this explanation is the target value for automatic exposure. Exposure is determined automatically in accordance with the brightness of image to capture, but a target value if you wish to set can be set in the range of 0 (dark) to 24 (bright). The default is 12. The functions of the Camera Library relevant to the “Brightness Correction” are as follows. : Retrieve the current brightness setting.
Compulsory Shutter Sound The shutter sound is generated by the audio during shooting photos. To prevent video voyeurism, whatever the case, it is forced to sound including when the audio is set to mute and when a set of earphones is being used. Flickerless The CMOS Camera in built-in IT-9000 detects flicker automatically and minimizes the affection by it. Focus Adjustment The CMOS digital camera is equipped with a focus adjustment function to enable the operator to capture focused images.
Flipping Image In the IT-9000, the direction of flipping image on the screen is determined in accordance with OS’s screen flip setting. For the specifications of flipping screen image, refer to “Camera Rotation” in MSDN library. Table 2.50 Item Flipping image Image Preview display − − − − Captured image − − − − Setting (Flip image in clockwise) No flip (default) 90 degree (OS. When specifying image to flip 90 degree in clockwise.) 270 degree (OS.
Adjusting Movie File The integrated camera module has the capability of setting movie quality (delicacy, smoothness, beauty of the movie screen when playing back movie) and recording sound in capturing movie. If you set the screen quality higher, captured movie can be in a good quality, but it makes the file size be swelled. It can also set sound in recording movie. If you play with some of the buttons while you are capturing movie, it may record sound.
2.4 Near Field Communication (NFC) 2.4.1 Basic Specifications The following types of smart card can be accessed for reading and writing by the Near Field Communication (hereafter referred to it as NFC) integrated in the terminal. • • • • ISO/IEC14443 Type A (MIFARE Standard; Ultralight) See note 1. ISO/IEC14443 Type B FeliCa;FeliCa Lite See note 2.
2.4.2 Communication Functions Reading and writing data with a smart card is performed by the way of contactless communication between the integrated NFC module in the terminal and that smart card. Smart card is preprogrammed by the manufacturer to perform certain operations in response to prescribed commands. When a command is correctly transmitted by the terminal via the NFC to smart card, the smart card responds to the received command by performing a corresponding operation.
Multi Step mode While specified call back function return TRUE, start IC card continuously. There is no case to start again IC card which started before. Control will be returned to application at each IC card start timing. Application will start IC card as maximum 100 pieces according to execute this function continuously. Search operation will be terminated by the following condition. . Find one IC card . Passed timeout period . Specified call back function return FALSE .
Power saving control at card polling It is possible to save power consumption by search IC card with adjust to long as radio wave sending period. But sending period will be longer than before, then IC card detect response will be down. Please try to use this method for long time continuously IC card waiting case. Data Communication Functions Data communication becomes possible once the smart card has been activated by the card polling function.
Below is an example of data communication between the NFC module and smart card. Figure 2-9 Note: The NFC module consumes very little power while it is turned on. In addition, turning on the module takes time so if you would like to start communicating with a smart card very quickly, turn on the module at same time when activating the application. To start communication with a smart card, start it by performing card polling. After the application is complete, be sure to close the NFC module.
2.4.3 Expanded Features Radio Wave Auto Stop Timing Notification After successfully activating a smart card with the card polling function, the radio wave transmission will stop automatically if a certain time period elapses without any data communication between the NFC module and the smart card. If this happens, it is possible to send a notification, via either a window message or an event, of the timing when the radio wave transmission stopped.
2.5 Secure Application Module (SAM) This chapter describes about detailed specifications of the SAM. 2.5.1 Basic Specifications Access functions are supported for SAM cards inserted in the SAM card slot. Communication can be performed with SAM cards compliant with ISO7816. 2.5.2 Power Control SAM card controller power control When a SAM device is opened, power is supplied to the SAM card controller and the ASIC that controls the controller.
The following is an example of command send/receive operations between the application and the SAM card.
2.5.4 Processing During Suspend and Resume The SAM control software switches the SAM card controller and the SAM card off when the handheld terminal is turned off. The actions stated in the table are performed when the terminal resumes.
2.6 USB This chapter describes about detailed specifications of the USB. 2.6.1 Basic Specifications Switching USB • • • • Switching between USB Client and USB Host is carried out by following electric signals. - Signal occurred by the USB cable (for USB Client/Host) - Signal occurred by the cradle This cannot be performed in application. Don’t switch during USB communicating and while USB device is connected and the terminal is recognizing the USB device.
Table 2.
2.6.2 COM Port COM ports used with the USB are as follows. Table 2.58 USB Function USB-MODEM COM2 COM5 2.6.3 Product ID USB product ID is as follows. Table 2.59 USB Product ID 0x00CE 2.6.4 Vendor ID USB vendor ID is as follows. Table 2.
2.7 Bluetooth This chapter describes about detailed specifications of the Bluetooth. 2.7.1 Basic Specifications Version Bluetooth® Version 2.0 + EDR Master The master establishes a connection with Bluetooth equipment in slave mode waiting for connection with the master. Client (Slave) The client (slave) becomes in waiting mode for communication initiated by the master. Security/Encryption This performs security (PassKey exchange) and encryption as laid down in the Bluetooth standard.
2.7.2 Communication Profiles The Bluetooth profiles described in the table are supported. Table 2.61 Function GAP (General Accessible Profile) SDP (Service Discovery Profile) Serial Profile (Client) Serial Profile (Server) DUN (Dial-Up Network) OBEX Object Push Profile HeadSet Profile Purpose Used in the substructure segment of Bluetooth communications such as device discovery, link establishment and security. Used to search for currently usable services provided by the partner Bluetooth equipment.
2.7.3 Security This feature supports security functions laid down in the Bluetooth standard. The Bluetooth security is divided into authentication and encryption. These are realized by the use of PassKey (otherwise known as PIN code). PassKey is a shared (common) authentication key used when forming a connection and trust relationship (bonding) with Bluetooth equipment. A maximum of 16 characters (in ASCII code) can be used, but there may be limitations on the no.
2.7.5 Simultaneous Use with WLAN Since Bluetooth employs the same frequency range (2.4GHz ISM band), Bluetooth cannot be operated concurrently with WLAN. However, it is possible to make mutual interference less by following the instruction without turning off the power of either device. • If the partner Bluetooth device supports AFH (Adaptive Frequency Hopping) AFH function automatically avoids the channels such as WLAN equipments are in use.
2.7.6 Communication Range The communication range for Bluetooth communication between two Bluetooth devices should be 3 meters or less. If there is an obstacle exists on the path that blocks radio wave, the actual range may become shorter. Secure free path for maximum range.
2.8 WLAN The IEEE802.11 b/g WLAN is operable with integrated WLAN module (model dependant). The IEEE802.11 b/g standard utilizes 2.4 GHz ISM (“Industry Science Medical”) frequency band, which is used for short range wireless communication. U U U U U U Device Name On the terminal, the device name used to capture data, with DeviceIoControl function, about the WLAN driver is “SDIO86861”. 2.8.
2.8.2 Expanded Features Power ON/OFF Control The power to the integrated WLAN module can be controlled in application. Turning off the power when the WLAN module is not in use can save power, prevent line congestion and allow the on-board use of the terminal in aircraft. However, it is recommended to consult a cabin crew prior to use of it. Operation Configuration File The operation configuration file can be used to set each default value of the WLAN settings.
2.8.3 Roaming This feature automatically switches one Access-Point to another in where two or more Access-Points with the identical SSID code exist are installed. 1. Searches for Access-Points that can communicate with the terminal, and lists up radio wave status of each Access-Point. 2. Compares radio wave status of the currently connected Access-Point with those for the listed Access-Points. 3.
2.8.4 Zeroconfig This feature coordinates with the module firmware and the WLAN driver to perform some of the WLAN link management and the Network management. • If multiple SSIDs are registered as prioritized connections, attempt to establish connection will be performed to each registered SSID. In this case, the interval of time period for reconnecting will become prolonged. If the reconnection time ranks important, register one SSID only as prioritized connection.
2.8.5 Channels The no. of WLAN channels set by default at the factory is “1CH-13CH” (13 channels) compatible with the ETSI standard (EU radio standard). 2.8.6 WLAN Setting with Configuration File The configuration file can be used to set the default values for the WLAN settings. By loading the configuration file into the terminal, setting to configure the WLAN operations can be easy. • • The configuration file is “\Documents and Settings\System Settings\WLANCFG.ini”.
File Format The file format of configuration file is INI format which follows restrictions described below. • • • • • • The maximum size of the configuration file is 60 Kbytes. A line starting with “;” is regarded as comment. It does not regard as comment if located in mid-line. The separator for KEY and VALUE is “=”. Space and tab, etc., also are included in either KEY or VALUE. If a space is inserted after “=”, for example, in “SSID= tunami”, the SSID value includes the space (“ ”)+tunami.
STATIC Section This section specifies parameters necessary for the integrated WLAN module to establish connection with Access-Point. Table 2.66 KEY SSID ADHOC WEP KEYINDEX KEYDATA SECURITY AUTH WEP_OPEN_KEYINDEX WEP_OPEN_KEY WPA_PEAP_USER WPA_PEAP_PASS WPA_PEAP_DOMAIN WPA_PEAP_VALIDATESERVER WPA_TLS_DOMAIN WPA_TLS_VALIDATESERVER WPA_TLS_CERTIFICATE WPA_PSK_KEY WPA2_PEAP_USER WPA2_PEAP_PASS Continue. VALUE Set SSID. Set Infrastructure or AdHoc mode selecting either value.
WPA2_PEAP_DOMAIN WPA2_PEAP_VALIDATESERVER WPA2_TLS_DOMAIN WPA2_TLS_VALIDATESERVER WPA2_TLS_CERTIFICATE WPA2_PSK_KEY NETWORK Set domain name of WPA2_PEAP. Set WPA2_PEAP server certificate to be valid or not selecting either value. 0: Server certificate invalid 1: Server certificate valid Set domain name of WPA2_TLS. Set WPA2_TLS server certificate to be valid or not selecting either value. 0: Server certificate invalid 1: Server certificate valid Set friendly name of WPA2_TLS client certificate.
Examples of Settings for STATIC Section Example 1; If WEP is used. [STATIC] SSID=tunami ADHOC=0 WEP=1 KEYINDEX=0 KEYDATA= 5C1E1455A2D504920483C59EA19AC2AB3F12821273BD2A17A9BE NETWORK=0 Example 2; If WEP is used. [STATIC] SSID=tunami SECURITY=WEP AUTH=OPEN WEP_OPEN_KEYINDEX=1 WEP_OPEN_KEYDATA=5C1E1455A2D504920483C59EA19AC2AB3F12821273BD2A17A9 BE Example 3; If WPA or PSK is used. [STATIC] SSID=tunami SECURITY=WPA AUTH=PSK WPA_PSK_KEY=5C1E1455A2D504920483C5EABE NETWORK=1 Example 4; If WPA or PEAP is used.
TCIP/IP Section This section sets the integrated WLAN module’s IP address. Table 2.67 Key DHCP IPADDRESS SUBNETMASK DEFAULTGATEWAY DNS1 DNS2 WINS1 WINS2 VALUE Set “Enable” or “Disable” on the DHCP. If “1: Enable DHCP” is selected, the subsequent settings are not necessary to set. 1: Enable DHCP. 0: Disable DHCP. Set IP address. Set subnet mask. Set default gateway. Set primary DNS server address. Set secondary DNS server address. Set primary WINS server address. Set secondary WINS server address.
Example ; Configuration File [WLAN] WLANPOWER=1 POWERSAVE=1 WLANCFG=1 BandConfig=1 RoamingRSSILevel=-78 RoamingAvailableTime=15 RoamingRSSISpan=1 RoamingAvailableTime=60 BandConfig=1 MAX_SCAN_TIME=105 SCAN_CHANNELS=123456789ABCDE WLAN_CFGTOOL=WLANCONFIG [STATIC] SSID=TSUNAMI ADHOC=0 SECURITY=WEP=1 AUTH=OPEN WEP_OPEN_KEYINDEX=01 KEYDATA= 5C1E1455A2D504920483C59EA19AC2AB3F12821273BD2A17A9BE WEP_OPEN_KEY=516DFEC900486137CB9D8C82993F184B508A916F5B5E733A0159 NETWORK=0 [TCP/IP] DHCP=0 IPADDRESS=192.168.1.
2.9 WWAN This chapter describes about detailed specifications of the integrated WWAN function. 2.9.1 Basic Specifications The terminal (model dependant) supports the following communication protocols. Table 2.
2.9.2 Available Features Packet Communication This connects to the IP network. Short Messaging This transmits and receives brief messages via SMS network. Voice Communication This enables voice communication. Library User applications can be developed to support the WAN Communication functions using the WANGPRS Library. For detail, refer to the WANGPRS Library manual.
2.10 GPS Positioning Function This chapter describes about detailed specifications of the GPS. 2.10.1 Basic Specifications GPS module power is related with phone function, therefore when you want to use GPS function, please check Phone power condition in Wireless Manager is On status. (Default setting is On.) Figure 2-11 (GPS Unit Power ON condition) Figure 2-12 (GPS Unit Power OFF condition) The terminal supports the following functions that come with the integrated GPS module. Table 2.
2.10.2 GPS Function API Latitude and longitude data are obtained using independent positioning to provide the following functions. • Obtains positional data from user application via the GPS intermediate driver (Windows Mobile standard GPS interface) • Displays satellite reception status with the GPS Information tool Note: Refer to “ GPS Information ” with the GPS Information tool for detail. X X The GPS intermediate driver provides GPS information in two ways.
NMEA Sentence Output The NMEA-0183 is output in text format with each item separated by a comma (,) and sentences separated by a new line code (CRLF). The checksum is added up at the line end. The checksum calculates the XOR’ed value of character data enclosed by $ , ' and * in hexadecimal string values. Table 2.71 $ Sentence-identifying character , value (, value)… *Checksum CRLF Multiple sentence types are defined.
GGA Sentences This displays GPS fix data. Example of output: $GPGGA,095635.00,3540.05802,N,13921.63542,E,1,06,1.54,212.5,M,39.2,M,,*59 Table 2.72 Item $GPGGA 095635.00 3540.05802 N 13921.63542 E 1 06 1.54 212.5 M 39.2 M Description UTC time is displayed in the hhmmss.ss format. Displays latitude. The value at the left shows a longitude of 35 degrees and 40.05802 minutes. N and S indicate north and south respectively. Displays longitude. The value at the left shows a longitude of 139 degrees and 21.
GSA Sentences This outputs GPS DOP and active satellite data. Example of output: $GPGSA,A,3,13,17,28,04,02,23,,,,,,,2.38,1.54,1.82*09 Table 2.73 Item $GPGSA A 3 13,17,28,04,02,23, ,,,,,, 2.38 1.54 1.82 Description Positioning mode A = 2D/3D auto-select M = 2D/3D manual-select Positioning status 1＝no signal 2＝2D 3＝3D Satellites from which signal is being transmitted. Displays up to 12 satellites. Shows PDOP.
GSV Sentences This outputs data on GPS Satellites in View. GSV sentences show current data on the satellites from which a signal can be received. A single sentence contains data up to four satellites. Data on the fifth and subsequent satellites is output in multiple lines. In the example below, data is provided on eight satellites in two sentences.
RMC Sentences This outputs data on the Recommended Minimum. Example of output: $GPRMC,095636.00,A,3540.05781,N,13921.63500,E,0.851,193.03,011107,,,A*62 Table 2.75 Item $GPRMC 095636.00 A 3540.05781 N 13921.63500 E 0.851 193.03 011107 A Description UTC time is displayed in the hhmmss.ss format. Indicates status: A = data is valid. V = data is invalid during measurement. Displays longitude. The value at the left shows a longitude of 35 degrees and 40.05781 minutes.
Positioning Data Using the GPS Intermediate Driver API The Windows Mobile GPS intermediate driver provides an API to analyze NMEA character strings and obtain positioning data. The GPS intermediate driver API can be used in the following procedure. 1. Create an event with CreateEvent() in order to detect GPS module status changes and output. 2. Connect to the GPS module with GPSOpenDevice(). GPS module status and positional changes can be registered for each event with GPSOpenDevice().
Figure 2-13 The functions relevant to the GPS intermediate driver API are as follows. Table 2.77 Function Description Closes the GPS intermediate driver and connects to the GPS device. GPSCloseDevice Retrieves the status of the GPS module. GPSGetDeviceState Retrieves GPS positioning data. GPSGetPosition Opens the GPS intermediate driver and connects it to the GPS device. GPSOpenDevice Note: The terminal does not support the GPS Intermediate driver’s DeviceIOControl function.
2.11 MCR This chapter describes the specifications of the MCR functions. The functions incorporated in the terminal are as follows. • Read/Analysis function • Read completion notification/Error notification function • Track specification function • Automatic Power OFF function • Raw data retrieve function 2.11.1 Read, Analysis Function This function serves to pass through (run) magnetic card in the MCR unit and read data on the magnetic card.
2.11.2 Read Completion and Error Notification Read Completion Notification The terminal will notify application program of the fact that the read/analysis of data or raw data retrieve is completed at that point in time. The notification method can be either by event or by message, and the initial setting is the latter. (This notification method can be modified with MCRSetEventNotification function) In case of notification by message, a message of WM_MCR_READING defined in the mcrlib.
Error Notification If an error occurs when data retrieve is performed with the library function, the error status will be saved accordingly in either StatusISO1, StatusISO2, or StatusISO3 (if data retrieve is successful, MCR_DATA_SUCCESS will be saved, and the data information of the track will be stored in the data storage buffer DataXXX[]). The following table lists the error contents. Table 2.79 List of error contents Error MCR_NO_DATA MCR_DATA_SUCCESS Description No retrieved data.
2.11.4 Automatic Power OFF The user can automatically turn off the power to the MCR if a given period of time elapses. The MCR power is basically turned on when MCROpen function is carried out, and turned off when MCRClose function is carried out. However, MCRSetAutoPowerOff function turns the MCR power to off after elapse of a given time period even if MCRClose function is not carried out (The MCR cannot be used while the power is off).
2.12 Printer This chapter describes the functional specifications of the printer installed as standard in the terminal. The printer has the following functions incorporated: - Printing function Detecting function * The 82.55 mm printer has the same specification as the 80 mm printer. 2.12.
Character code table (available if ANK font is specified) Tables 2.53 and 2.54 show the ANK Character Code Table (0x20 to 0xFF). Table 2.81 Character Code Table Description Expanded Graphics Character code table incorporating IBM graphic characters from and Code after 80h. Katakana Code Character code table incorporating half-square Katakana characters from and after 80h.
Character size For each standard size, a total of five enlargements including x1, x1.5, x2, x3, and x4 are supported. 1 1.5 2 3 4 1 1.5 2 3 4 Figure 2.14 If a no-paper error occurs during the printing of enlarged characters, some of the characters may not be printed. Note: The enlargement for OCR-B fonts is not supported.
Character decoration Determine the appearance of each character by combining the following four kinds of decorations. The following precautions must be kept in mind when each kind of decoration is used. Table 2.83 Decoration Reverse Bold Light Smoothing Remark Since this greatly increases the printing duty, power consumption will increase while printing speed decreases accordingly. The objective letter becomes thicker in the horizontal direction.
Bold, Reverse, Light Nrmal Bold and reverse Bold Bold and light Reverse in white/black Reverse and light Light Bold, reverse and light Figure 2.16 Printing functions The following two major printing functions are incorporated into this printer: printing the character font and printing the bit image. Print start conditions The printer will commence its printing job when the print start conditions listed below are met.
Printing paper The user must specify the print paper type with the ESC command (Set Paper). The recommended paper types are shown below: Table 2.84 Paper Description F-220VP 1-ply (high sensitivity) HA220AA 1-ply (standard) AFP-235 1-ply (for long-term storage) HW54S Label ODT60TC-RAK 1-ply (thin paper) Notes: 1. If 2-ply paper is used, set also the print speed to the graphic printing mode. 2. Perform this paper type specification only after the printing operation stops (i.e.
Feed in Forward It is possible to specify the forward feed with the ESC command “Specify forward feed”. The forward (positive) feed amount can be set up in the range of 0 to 255 dots or in the range of 0 to 255 mm. Continuous printing after error If an error occurs, the printing operation instantly stops. Subsequently, the user can make a decision as to whether the printing operation is to be continued after canceling the error. To specify continuous printing after an error use the ESC command.
Pre-heating If the head temperature is too low in a low-temperature environment, it is recommended to automatically raise the head temperature before commencing the print job. This is intended to improve the print quality at low temperature. While the pre-heating continues, the icon shown below appears at the Task tray. Note: If at a substantially low temperature, it may take more than 1 minute for the head temperature to reach a sufficient level.
Orientation This function can be implemented by flipping the character fonts. However, only character fonts that have equal enlargements in both vertical and horizontal directions can be flipped. This specification can be made at the head of a line. If it is made in the middle of line, it is ignored. This specification continues to be valid until it is canceled. Figure 2.
Notes • The specification of orientation shall be made at the beginning of the line. If it is made in the middle, it is ignored. This specification continues to be valid until it is canceled. • It is not permitted to flip 6x7-dot mode fonts and OCR-B fonts. • Only character fonts that have equal enlargements in both vertical and horizontal directions can be flipped. • The orientation once it is set up continues to be valid until it is canceled.
Printing stamps It is possible to register image data and use it as a stamp. No. of registered images : 1 piece Size : An optional size can be specified at 8-dot increments in the horizontal direction and 1-dot increments in the vertical direction. Table 2.86 Item Max. data size that can be registered Max. horizontal size Max.
Printing the bit image: This function prints the specified number of dot-lines of image data. Since a full dot-line of data is 576 dots (72 bytes) long for an 80 mm width paper, send it to the printer after subtracting the number of dots taken up by the right and left margins, if they are specified. If, for example, 40 dots are specified for each of the right and left margins (each margin can be specified in 8-dot units), the data length of one dot line will be 576 - (40 + 40) = 496 (62 bytes).
Composite printing of bit image: It is possible to combine text and a bit image for print out. Bit image Text AB CD Figure 2.24 Printing user-defined fonts: It is possible to register 128 user-defined fonts. The font sizes that can be registered are 24-dot, 16-dot, and 12-dot. To assign more than one size of font (24-dot, 16-dot, 12-dot) to the same character code, each font size must be registered.
Data configuration example of 12-dot font 1st byte 2nd byte 23rd byte 24th byte Dummy data Figure 2.26 Prohibiting APO during printing Disable the APO function through the Printer Library (PRNOpen function) to prevent the APO from being active during printing. If the Printer Library function is carried out after printing is completed, the APO function will be automatically restored to the setting before the printing started.
PRNBarcodeOut : Prints out specified bar code. Printable symbology The following 1D symbologies can be printed. Specify a desired symbology by making use of the API. • JAN • UPC-E • NW-7 • Code39 • ITF • Code128 (EAN128) See note below. Note: The EAN-128 can also be printed out if Code128 is specified and it is made to meet the EAN128 data format. However, it is not permitted to print an AI (Application Identifier) enclosed by a pair of parentheses as ( ).
Left margin Specify the space to be provided to the left of the bar code in the millimeter unit. • 0 to 69 mm (or, 0 to 45 mm for 58-mm paper width) • Automatic centering Orientation of printing: Specify the orientation to print a bar code. • Printing in the vertical direction • Printing in the horizontal direction Height H L margin Appended characters Bar Code L margin Bar Code Appended characters Figure 2.27 Data correction: JAN • Accepts only the data in 7, 8, 12, and 13 digits.
UPC-E • Accepts only the reduced format of data. • If any data is entered before reducing it, an error results. ITF • If data forms with odd number of digits without a C/D, “0” is added to the beginning. • If data forms with an even number of digits including a C/D, “0” is added to the beginning. Code128 • Specify, as required, the start character, function character, code-set character, shift character, and data character for the data.
Code128 symbol characters and their notation method: • Start characters If the start character is not specified, it is automatically determined from the character placed at the top of the data. However, for using Code Set C, it is necessary to specify “\sC”. Table 2.89 Character START A START B START C Notation \sA \sB \sC • Function characters Since it is not automatically inserted, specify an appropriate function character as required. Table 2.
• Stop character This stop character is automatically inserted. There is no data notation method to describe it. Table 2.
• Data characters Table 2.94 Code Not possible to describe in character notation. 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F Chara. notation Space ! “ # $ % & , ( ) * + ¥ . / Hexade cimal notation Code set Code Chara.
Print specifications: The following tables show the print specifications applied if printing is performed vertically. ( ) shows the specification if printing is performed horizontally. Table 2.
Code128 Number of printed digits Print width Printed data C/D 3 to 26 (46) digits including start code, C/D, and stop code. 9.000 to 72.000 (127.000) mm Digit, 0 to 9 Alphabets: A to Z, a to z Symbols: space,!,”,#,$,%,&,’,(,),*,+,-,.
Table 2.96 Code JAN UPC-E NW-7 Code39 58 mm paper width Number of printed digits Print width Printed data C/D Number of printed digits Print width Printed data C/D Number of printed digits Print width Printed data C/D Number of printed digits Print width Printed data C/D ITF Number of printed digits Print width Printed data C/D Code128 Number of printed digits Print width Printed data C/D Print specification 8 and 13 digits 8 digits: 19.125 mm 13 digits: 35.
Printing with Print System Through the Printer Library of the Print System it is possible to use the GDI function of WindowsCE to create and print out the print data. Configuration of the Print System: The Print System configuration is shown below. The application first creates (retrieve) the device context of the printer. Application Print Library GDI If the application starts (CpStartDoc) the print job, the spooler begins to create the spool file.
Printing process Application uses the Printer Library of the Print System to create and print out the print data. Printing from an application means a process up to the point the spooler creates a spool file via the above described printer driver. The actual print job is where the spooler, after creating the spool data, sends the print data via the language monitor/port monitor to the printer. If printing begins, the corresponding icon is displayed in the Task Tray as shown below.
Setting the printer With the Print System it is possible to set up the printer while displaying the Printer Property dialog box. Figure 2.32 Orientation Paper Size Width Length Copies Collate Dithering : Used to switch the orientation of the form between Portrait and Landscape. : Fixed to “Free size”. : Specify the paper width. Either directly enter the value or set up it through the spin control. : Specify the paper length. Either directly enter the value or set up it through the spin control.
Figure 2.33 Paper Type no. Print Speed Print Density Preheat Continuous Print Marker : Set up the paper model no., either 1-ply (high sensitivity)、1-ply (standard)、1-ply (for long-term storage)、Label、1-ply (thin paper). : Set up the print speed, either Quick or Slow or (High-quality print) or Graphic. : Set up the print density in the range of 1 to 9. : Specify whether to pre-heat. If the check box is selected, pre-heating is conducted.
2.12.2 Detections Marker Detection This function detects a marker which is pre-printed on the back of the paper roll in order to align the print position. If no marker can be detected within 30 cm of a paper feed after this marker detecting function has been carried out, the marker detection error is output and the printer operation stops. To perform marker detection use the library function. The marker width to detect differs depending on whether back barcode is enabled or disabled.
Platen Open Detection The platen open status is automatically detected before printing or paper feed takes place. If the platen is open (platen open), the printing or paper feed operation is blocked. Note: If an attempt is due to print immediately after reset or opening/closing the platen, paper feed takes place for several tens of dots before printing starts. This is performed to offset the backlash (gap) between the printer motor gears produced by opening/closing the platen.
Head Temperature Detection To obtain the best possible printing results the printer head should be thermally controlled according to the temperature that is sensed. In addition, in order to prevent a fire, etc., caused by an abnormal rise in temperature at the head, the head temperature is always monitored so that it does not exceed a specified temperature. If the head temperature exceeds the specified temperature, the energy supply to the head is forcibly stopped.
Barcode configuration (back of paper) 140
For 6 digits Marker Space between marker and barcode Start bar bit 7 (first 3 digits) Data characters First 3 digits (bit7~bit0) Separator (white) Last 3 digits (bit6~bit0) bit 0 (first 3 digits) Barcode area bit 6 (last 3 digits) bit 0 (last 3 digits) Parity bar (even parity for black bars) Stop bar White space for For 15 digits Marker Space between marker and barcode Start bar Separator (white) bit16 bit40 Data characters 15 digits (bit47~bit0) Barcode area bit8 bit32 bit0 bit24 Parity bar (e
• Marker area Markers are used to align the print start position. In the back barcode specification, the back barcode read start position is also aligned • Space between marker and barcode This is a space (blank) to distinguish between the marker and the barcode. • Barcode area The combination of black and white bars represents 6 or 15 digits. Barcodes consist of a start bar, data characters, parity bars and stop bar. • Start bar This bar indicates the start of the barcode.
Example of a back barcode - For 6 digits (083092) (083-> 0x53, 092-> 0x5C) Start 0101 0011 1011 100 Stop Parity - For 15 digits (0101084670113732) (0101084670113732-> 0x5BEF9BDAB7C4） Start 0101 1011 1110 1111 1001 1011 Stop 1101 1010 1011 0111 1100 0100 Parity Stop Parity 143
2.12.3 Error Control If an error or Power OFF event occurs, it shall be handled according to the settings made with the ESC commands for specification of continuous printing after an error. Table 2.97 Cause of error Power OFF/VDET2 VDETP No paper Platen open Continuous printing after error: Enabled Operation after Print data resetting the error Retained Printing continues (Note 1) Retained Printing continues Retained Cleared (if it occurs during printing.
Priority of Errors From this printer, notice of errors is posted according to the following priority. Table 2.98 Priority 1 2 3 4 5 6 7 Error Power OFF/VDET2 occurrence Hardware error Platen-open error No paper error Splash cover closed VDETP occurrence Head temperature error Abnormal Head Temperature The head temperature is always monitored so that an abnormal rise in the head temperature does not cause a malfunction, etc.
2.12.4 Registry Information For the printer various setup parameters are available. Among them, the settings in the table below are stored in the registry. After a reset is performed on the terminal, the stored settings in the registry remain effect unless they are intentionally modified. The registry key is as follows: HKEY_LOCAL_MACHINE\DRIVERS\BUILDIN\PRNDRV Table 2.
2.12.5 ESC Commands The following table lists the ESC commands available to control the printer. Table 2.
ESC f n ESC e n ESC d n ESC g n1 n2 Data ESC Z n Specifying printing bar code data Specifying the left margin for bar code printing Specifying the orientation of bar code printing Printing bar code Initialization 148 01h (8 x16-dot font) 00h 00h (vertical) ---
2.12.6 Guide Line to Producing Formed Paper This chapter describes a guide line you must care when you produce your own formed papers. The printer integrated in the terminal generates a marginal error on the printing position on paper. The following explains a sample of formed paper. While printing on a long formed paper, marginal error is accumulated. This deteriorates the printing accuracy.
2.13 Power Control This chapter describes about detailed specifications of the power controls. 2.13.1 Monitoring Low Voltage Four levels of the low voltage monitor control are provided for the terminal. Table 2.
Memory Backup Battery The following shows levels available for the memory backup battery. The terminal’s system checks the status of the backup battery every five minutes. Since power source of charging the memory backup battery is supplied by the battery pack, charging it may not be carried out sufficiently if the battery pack has not been accommodated for a long period or is not being fully charged.
The status of both battery pack and memory backup battery can be monitored with Microsoft’s GetSystemStatusEx2() API function in your application to retrieve the status values described in the table. Table 2.105 Member ACLineStatus Description Retrieves the status of AC power. Retrieves the status of battery pack. Returned Value AC_LINE_OFFLINE : AC power is off. AC_LINE_ONLINE : AC power is on. BatteryFlag BATTERY_FLAG_HIGH : OK BATTERY_FLAG_LOW : Low BATTERY_FLAG_CRITICAL : Almost exhausted.
2.13.3 Power OFF Factors The following is the power OFF factors. • The Power key is pressed while the power is on. • Neither key input, disk access, nor communication is performed within a preset time period. • Output voltage from the battery pack is low (VDET2, VDET3) (see note below). • The battery cover lock switch is open. • Internal temperature in the terminal exceeds the limit set by the system (see note below). Note: The warning message appears a next time when the power is turned on.
2.13.4 Control on Power Key Time Period after Pressing the Power Key It takes approximately one second for the system to recognize turning on or turning off the power after the Power key is pressed down. Disable Power Key after Turning On the Power After turning on the power, the Power key is set disabled for a certain period of time. This prevents turning off the power while various drivers are being loaded. This time period can be set with the System Library.
2.13.5 Power Saving Idle The power is saved by putting the CPU into idle state when event standby status is detected by either the terminal or application running on the terminal. The peripheral devices are in operating state while the CPU is in the idle state. Auto Power OFF (APO) The power is automatically turned off (“APO”) if no key input, no disk access, or no communication is made during a preset time period.
Virtual Power OFF/WLAN Standby This is standby mode for WLAN operation. The System Library is used in application to turn off the LCD, keys and set the CPU frequency to “POWERSAVE” mode to save the power. Other peripheral devices are in operating state. Table 2.
2.13.6 CPU Power Mode The following shows the power modes operable on the terminal. Table 2.109 Mode Discharge RTC backup SLEEP mode RUN mode POWERSAVE NORMAL TURBO AUTO IDLE mode DeepIdle Description State in that the battery pack and the super capacity have been discharged. Neither content in the RAM nor the RTC is backed up. State in that only the RTC is being backed up. The content in the RAM is not backed up.
Discharge Operating / Memory backup battery insertion Memory backup battery empty RTC backup SLEEP mode Operating battery empty Power ON Power ON Power OFF WakeUp VDET2 / VDET3 Battery Cover open RUN mode Mode Turbo Power save Normal NORMAL TURBO No activity POWERSAVE Interrupt IDLE mode DeepIdle Figure 2-35 158
2.13.7 Virtual OFF by Application The Virtual OFF is a function and its main object is to save power. Internally, the terminal is running normally but it seems to be with the power being turned off – unable to display and input a key. This function is mainly used to provide the terminal user with fast resume from standby state in WLAN communication. Virtual OFF State Transition The state transition diagram of Virtual OFF is below.
SysSetVirtualOffMode（ENABLE） SysDisablePowerOff SysDisableAPO Virtual OFF Mode Ordinary ON State Mode SysSetVirtualOffMode（DISABLE） SysEnablePowerOff See note.
The functions of the System Library relevant to the “Virtual Off” are as follows. : Set up ”Disable” for turning off the power on the terminal. SysDisablePowerOff : Sets up “Enable” or “Disable” for virtual turning off the power. SysSetVirtualOffMode SysSetVirtualOffModeEx : Sets up “Enable” or “Disable” for virtual turning off for panel, screen, key operations, prohibition on APO, prohibition on turning off the power, and setting CPU speed.
2.13.8 Virtual OFF by System The virtual off function by system is not supported by the terminal. 2.13.9 Charging/Supplying the Power The optional Dual Battery Charger (HA-D32DCHG) can be used to charge battery packs (two at a time). Mounting the terminal on USB Cradle (HA-H60IO), Cradle-type Battery Charger (HA-H30CHG), or Ethernet Cradle (HA-H62IO) allows charging the battery pack while it is installed in the terminal and supplying the power to the terminal. 2.13.
2.14 Security This chapter describes about detailed specifications of the security. 2.14.1 Setting Password for Terminal This is the password setting implemented in the terminal. Your password can be set at the Control Panel. Click the Lock icon to initiate the Password Settings screen, and then enter your password in each field. 2.14.
3. Control Panel Applets The Control Panel applets initiated by navigating to Start → Settings are programs that display the content of the various parameters for the terminal itself and to change the settings. The Control Panel has three tabs. The applets in each tab are listed in the following tables. See Tables 3.1 to 3.3. Table 3.1 X X Settings Name Bluetooh CASIO -- MS Yes Changes the date, time, and alarm settings.
Table 3.3 X X X X X X X X X X X X X System Tab Name About Description Displays system information. Backlight Changes the backlight brightness. Buzzer Sets up buzzer sound volume. X X X Certificates Certificates CPU Speed C X X X Certificates Install Sets up the CPU’s clock frequency. X X X Yes -- -- Yes -Yes Yes -Yes Encryption -- Yes Error Reporting Enables the terminal to encrypt files in storage card. Enables the terminal to issue Error Report.
Table 3.4 Connections Tab Name Beam Description Enables the terminal to receive all incoming beams. Connections X X X X X X X X X CASIO -- MS Yes Connection Manager -- Yes Controls the terminal to your network. -- Yes Network Cards Configures network adapters. -- Yes USB to PC Enables advanced network functionality. -- Yes Yes -- Wireless Manager Sets up the power for WAN and the parameters required for WAN configuration. Enables or disables network devices.
3.1 Clock & Alarms This applet is for setting date, time and time zone. Time Tab This tab is for setting time zone, time and date. Figure 3-1 Alarms Tab This tab is for setting alarms. Figure 3-2 To set alarms, follow the steps below. 1. Tap < Description > and enter a name for the alarm. 2. Tap a day of the week for the alarm. You can select multiple days by tapping each desired day of the week. 3. Tap time to open a clock and set time for the alarm. 4. Tap to specify a type of alarm you want.
More Tab This tab is for setting options. Figure 3-3 To display the clock in the title bar, select Display the clock on the title bar in all programs checkbox.
3.2 Lock This applet is to set up a password that is used to start up the terminal. Password Tab Figure 3-4 Prompt if device unused for Check the checkbox if password input is required every time the terminal is turned off and then turned on during the time period selected in the pull-down menu. For example, selecting “0” in the pull-down menu makes the password enter screen pop up every time when the terminal is turned on asking the user to enter a password before starting any operation.
Hint Tab This tab is for setting up a password hint. Figure 3-5 To help you recall your own password, enter a word or phrase that reminds you of the password. Display Tab Changing the unlock display will require your device to restart..
3.3 Power This applet is used to view the status of batteries and set power management options. Battery Tab Figure 3-6 This tab provides information about status of operation battery (lithium-ion battery pack) and backup battery.
3.4 Sounds & Notifications This applet is to set up event sounds and notification options. Sounds Tab This tab is to set up “Enable” or “Disable” for sound types of each event listed in the figure below. Figure 3-8 Check the checkbox of each event you wish to set up sound. Notifications Tab Figure 3-9 In the Event pull-down menu, tap an event name and then set up the relevant options for how you want to be notified. The options include special sound, message, and flashing light.
3.5 Today This applet is used for customizing the Today screen. Appearance Tab This tab is used for changing the appearance of the Today screen. Figure 3-10 To change the current theme, highlight a new theme in the Select a theme for your device menu. To change the background image in the Today screen, follow the steps below. 1. Select the Use this picture as the background checkbox and tap Browse button to make a list of your picture files appear. 2.
Items Tab This tab is used for changing the items that appear in the Today screen. Figure 3-11 To add or remove items in the Today screen, check the checkbox next to each item name to add, or remove the check to remove. To change the listed order of an item displayed in the Today screen, select the item and tap Move Up button for upper position or Move Down button for lower position.
3.6 Buttons This applet is for setting parameters concerned with operations with the keyboard. Program Buttons Tab This tab is for reassigning a program to a key. Figure 3-12 Note: The IT-9000 has no keys that you can assign program in this applet. Up/Down Control Tab This tab is for specifying the key repeat rate. Figure 3-13 Delay before first repeat: This adjustable slide is to set a waiting time period until when repeating key entry starts.
Others Tab Figure 3-14 User definition key Specify “Enable” or “Disable” for the user definition key. Turn-over key automatic decision Specify “Enable” or “Disable” for the turn-over key automatic decision. If “Enable” is chosen, set a period of time to wait for the decision delay.
3.7 Input This applet is for changing the current input method and options. Input Method Tab Figure 3-15 To change the input method, select a favorite method in the Input method pull-down menu. Block Recognizer Keyboard Letter Recognizer Transcriber : Use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. Do gestures to enter Return and Backspace. : Tap keys on the keyboard displayed on the screen to enter text.
Word Completion Tab This tab is for setting the word completion feature. Figure 3-16 To enable the word completion feature, select Suggest words when entering text checkbox and set other relevant options. Options Tab This tab is to adjust preferences for writing and recording.
3.8 Owner Information This applet is for setting information related to the owner. Identification Tab Figure 3-18 Name This field is for specifying the owner’s name inputting alphabets from the Input Panel appeared at the lower part on the screen. Company This field is for specifying name of the company that the owner belongs to. Address This field is for specifying an address. Telephone This field is for specifying a phone number. E-mail This field is for specifying an e-mail address.
Notes Tab Figure 3-19 Notes Using this field, a memo can be freely written. Options Tab Figure 3-20 To display identification information or note when starting up the terminal, select either the Identification information checkbox or the Notes checkbox.
3.9 About This applet is used for displaying and setting parameters concerned with the internal system of the terminal. Version Tab This tab displays OS version, integrated CPU name and available RAM size. Figure 3-21 Device ID Tab Figure 3-22 Device name: This field is for setting device name for the terminal itself. Spaces with device name entered in the field are not allowed. Description: This field is to enter text string for the device description.
Copyrights Tab This tab is for displaying the OS copyright information.
3.10 Backlight This applet is for setting brightness for the power source provided by either installed battery or external power source from the dedicated AC Adaptor directly connected to the terminal or connected via cradle, the backlight auto dimming, and the backlight auto off. Note: Do not remove the check from Turn off backlight when a button is pressed or the screen is tapped checkbox in both Battery Power Tab (see Figure 3.20) and External Power Tab (see Figure 3.21).
External Power Tab Figure 3-25 To set the backlight auto off, select Turn off backlight if device is not used for checkbox, and a period of elapse time in the pull-down menu. Battery Brightness Tab Figure 3-26 Brightness level The upper slider is for specifying brightness in one of nine grades which becomes effect while battery pack is being used as the power source.
External Brightness Tab Figure 3-27 Brightness level The slider is for specifying brightness in one of nine grades which becomes effect while an external power supply - by the dedicated AC Adaptor connected directly to the terminal or connected via cradle - is used as the power source.
3.11 Buzzer This applet is to set up “Enable” or “Disable” for buzzer sound and its sound volume in one of the three grades (minimum, medium, and maximum) for each event. Setting on the sound volume can be checked by clicking the respective triangle buttons on the right side.
3.12 Certificates This applet is used for editing certificates trusted by the user. Personal Tab Figure 3-29 Personal certificates identify the user of the terminal. Intermediate Tab Figure 3-30 Intermediate certificates help authenticate certificates received from other hosts.
Root Tab Figure 3-31 Root certificates authenticate certificates received from other hosts.
3.13 CPU Speed This applet is for setting the CPU operating speed. Figure 3-32 TURBO This mode sets the CPU frequency to 624 MHz. The mode is disabled when the Automatic Mode is set effect. STANDARD This mode sets the CPU frequency to 312 MHz. The mode is disabled when the Automatic Mode is set effect. POWER SAVING This mode sets the CPU frequency to 208 MHz. The mode is disabled when the Automatic Mode is set effect.
3.14 Customer Feedback This applet is for enabling Customer Feedback. Figure 3-33 While Customer Feedback is enabled, general usage information is collected and sent to Microsoft. No personally identifiable information is collected, and there are no airtime charges to you.
3.15 Encryption This applet is for enabling to encrypt files placed on storage cards. Figure 3-34 Encrypt files when placed on a storage card Encrypted files are opened just like other files, provided you are using the terminal that encrypted them. There is no separate step for you to take to read these files.
3.16 Error Reporting This applet is for enabling Error Reporting. Figure 3-35 While Error Reporting is set enabled, serious error information is collected and sent to Microsoft.
3.17 External GPS This applet is used to configure the built-in GPS receiver. Programs Tab This tab is for selecting the port from which programs will access GPS data. The program port must be a different port than the one specified as the hardware port. Figure 3-36 Hardware Tab This tab is for selecting the port to which your GPS receiver is connected. The hardware port must be a different port than the one specified as the program port.
Access Tab This tab is for enabling multiple programs to access GPS data simultaneously, the terminal automatically manages access to your GPS receiver. It is highly recommended that this option always be selected. Otherwise, only one program at a time can access your GPS receiver.
3.18 Imager Setting This tool allows the user to change the parameters and operating modes required for reading 1D and 2D bar code symbologies with the integrated CMOS imager (model dependant). The changed parameters and modes are saved in ini file and become effect automatically when the TDRead application invokes. 1D and 2D Tabs These tabs are to set up the 1D bar code symbologies in the 1D tab and 2D bar code symbologies in the 2D tab respectively.
Option Tab This tab is to set up relevant options for scanning a symbol of the specified bar code symbology. Figure 3-41 Enable With a check mark in the checkbox, it is possible to scan the bar code symbology selected in the pull-down menu. Digit Range This field is to set up the effective range of reading symbol of the selected bar code symbology, the pull-down menu on the left side is for the minimum number of digits and the other on the right side is for the maximum number of digits.
Decode Tab This tab is to set up options for decoding scanned bar code data. Figure 3-42 Decode Window This field is to specify decode window mode by selecting one in the modes listed below. Except the Normal mode, decode range will be decided automatically for only scanning symbol at center area. - Normal(Full Decode) Center Decode (1D/2D Codes) Center Decode (Composite) Decode Deliberation This field is to specify decode deliberation mode by selecting one in the modes listed below.
Exposure/LED Tab This tab is to specify the intensity for both LEDs, Aimer and Illumination. Figure 3-43 Aimer Laser This field is to set the intensity of the Aimer to either “0” for turning off or “100” for turning on. Illumination LED This field is to set the intensity of the Illumination to either “0” for turning off or “100” for turning on.
Multi Step Tab This tab is to specify a reading mode by selecting one of the radio buttons in the figure. Figure 3-44 Normal Mode This radio button selects the normal read mode. Multi Step Mode This radio button selects the multi-step read mode which continuously reads multiple symbols until when the Trigger key is released.
System Tab This tab is to set a period of time for the APO (Automatic Power OFF) function to activate and “Enable” or “Disable” for turning on the power on the terminal with the Trigger key. Figure 3-45 Scanner APO This filed is to set a period of time in the range of 0 to 1800 (in second) for the APO function to activate. Setting “0” will disable the function. Power up device with trigger key This checkbox is to set “Turning on the power of the terminal with the Trigger key” effect.
IMGRead Tab This tab is for setting the parameters for “ Image Scanner Read ”. X X Figure 3-46 Timeout This field is to set a time period for the Timeout to activate in scanning operation. Scanning terminates either when the Trigger key is released or when the time period in milliseconds set in this field elapses. Add Suffix This field is to specify a suffix that is appended at the end of each decoded data.
About Tab This tab displays current version information of the imager setting tool.
3.19 Managed Programs This applet is used for displaying the information about programs installed by your system administrator.
3.20 Memory This applet is used to view the usage of main memory and storage card memory. Main Tab Figure 3-49 The amount of memory allocated to file and data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. Storage Card Tab Figure 3-50 You can see how much memory is available on a storage card that is inserted into your terminal.
3.21 Setting Printer This Printer Setup Tool is used to set up or modify the settings of various functions required for printing. The Printer Setup Tool is stored in the Control Panel. Initiate it as necessary. List of the settings The following table shows a list of Printer Setup Tool setup items. Since these settings are stored in the registry, they can be retained even if a normal reset is carried out.
• In order to make multiple settings at a time, tap OK button only after making all necessary modifications. Paper Type In this field, set up the paper type to use for printing. This ensures that the specified paper can be used to print characters with the optimum parameters. Figure 3-54 From the list of paper types in the combo box, choose the paper to be used. The following five paper types can be selected.
Printing Speed Select the desired print speed from the list of the print speeds in the combo box. • Fast • Slow (High-Quality) (= Default) • Graphic Figure 3-56 Printing Control Tab Preheat This field is used to set up “Enable” or “Disable” for the pre-heating. Enable : Enables the pre-heating. Disable : Disables the pre-heating (= Default).
Continuous Printing (after error) This field is used to specify whether the printing should continue at a time when an error occurs or should stop. Figure 3-58 Printer Status This field is to display the current printer status. Check button displays the latest condition on the printer. The latest status can also be displayed if the tab is switched to other tab or when the Printer Control tab is re-displayed. Depending on the printer condition, the initial status display may vary when the dialog is invoked.
Printing Control2 Tab Marker Detection This field is used to set up “Begin” or “End” for the Marker Detection. Figure 3.60 Begin :the marker is detected when it enters the area over the marker sensor End :the marker is detected when it has passed over the marker sensor(=Default) The amount of feed can be selected in the range of 0 to 12 mm (0 mm by default). This is grayed out if “End” is selected. Error Control This field is used to set up “System” or “Application” for the Error Control of Splash Cover.
Table 3.6 List of printer statuses and messages Displayed Description message Normal Indicates that the printer is in normal condition. No anomaly is found with the printer. Printer is not The printer driver is in a state that it opened cannot be opened. Driver is not loaded. Either other application occupies the printer now, or the printer driver is in a state that it cannot be loaded. Printer is already opened. Hardware failure Another application is using the printer.
3.22 Regional Settings This applet is for setting display method and format of your regional items such as numeric value, currency, date, and time. Region Tab This tab is for selecting your language and regional items. The items you select determine which options are selected by default on the other tabs. Figure 3-62 Number Tab This tab is for setting display format of numeric value.
Currency Tab This tab is for setting display format of currency. Figure 3-64 Time Tab This tab is for setting display format of time.
Date Tab This tab is for setting display format of date.
3.23 Remove Programs This applet is used to display all programs installed in the terminal and delete them. To remove a program, highlight the program in the field (see Figure 3.57) you want to remove, and tap Remove button. Figure 3-67 Note: Programs burnt in the ROM in the terminal cannot be deleted.
3.24 Screen This applet is for changing the screen orientation, aligning the screen, and adjusting the text size. General Tab This tab is for changing the screen orientation and aligning the screen. To change the screen orientation, tap one of the Orientation radio buttons. To realign the touch screen, tap Align Screen button and follow the instruction appeared. Figure 3-68 Clear Type Tab This tab is for enabling a font-smoothing technology.
Text Size Tab This tab is to adjust the text size. Figure 3-70 To adjust the text size, move the slider right or left to increase or decrease the text size.
3.25 Task Manager This applet is used to view running tasks, switch tasks, and stop tasks. Figure 3-71 1. 2. 3. To switch to selected program, tap the program that you want to use and navigate to Menu → Switch To. To stop running program, tap the program that you want to stop and tap End Task. To stop all running programs, navigate to Menu → End All Tasks. Table 3.
3.26 USB Connection This applet displays connection establishment with PC or other device in USB mode. It is also used to change the connection related parameter settings. Connect Status Tab Figure 3.72 Can be connected to PC message appears in the tab when the terminal is connected to PC in USB Client mode. Or, Can be connected to LAN or modem message appears when the terminal is connected in USB Host mode.
Windows Mobile Device Center/ActiveSync Set this radio button effect to establish connection in Windows Mobile Device Center (or ActiveSync) between the terminal and PC via the USB connection. The radio button has been set effect by default. LMWIN/FLCE Set this radio button effect to establish connection in LMWIN (or FLCE) between the terminal and PC via the USB connection. Tab the OK button if you change above setting and wish to make it effective.
3.27 Version Info This applet is used to display each version number of the OS, boot section, loader, and service pack integrated in the terminal.
3.28 Beam This applet is for enabling to receive all incoming Bluetooth beams. Figure 3-75 To enable you to receive all incoming beams, check the Receive all incoming beams checkbox. Note: To conserve battery power, make the Receive all incoming beams effect only for a period you are receiving beamed files.
3.29 Connections This applet is for setting up multiple network connections. Tasks Tab Figure 3-76 To establish connection in GPRS, refer to “ WAN Settings ”.
3.30 Domain Enrollment This applet is used to enroll the terminal to your company network.
3.31 Network Cards This applet is used to configure network adapters. Figure 3-79 The installed network adapter drivers are listed here. Tap the adapter that you want to configure. Note: In some cases, this applet is displayed as the “Network Adapter” tab of the “ Wireless Configuration ” applet.
3.32 USB to PC This applet is for enabling advanced network functionality. Figure 3-80 To troubleshoot an ActiveSync cable connection, select Enable advanced network functionality checkbox.
3.33 WAN Settings This tool performs the WAN module power source settings, security settings, identification data settings, operator settings and status display. Power Tab This tab is to perform the WAN module power source ON/OFF settings. Figure 3-81 CASIO WAN Management This checkbox configures the WAN module power source to ON or OFF. Apply Button This button applies the settings selected in the checkbox.
Security Tab This tab provides the following functions according to the current SIM lock mode (unlock mode, PIN input standby mode or PUK input standby mode). SIM “Enable” or “Disable” setting is carried out in the Unlock mode. It is also possible to change the PIN code. A PIN code must be entered twice to change it. Figure 3-82 State The current SIM lock status is shown as “UnLock”. Enable SIM Lock This checkbox sets the SIM lock to “Enable” or “Disable”.
The SIM status can be changed to “Lock” by entering the correct PIN code in the PIN input standby mode. Figure 3-83 State The current SIM lock status is shown as “PIN”. Enter PINCODE Input the PIN code to change the lock status to “UnLock”. PIN Counter This displays the PIN code entry count for the current status. UnLock Button Entering the correct PIN code and clicking the “Enter PIN Code” box changes the lock status to “UnLock”.
A new PIN code can be set by entering the correct PUK code in the PUK input standby mode. The PIN code must be entered twice for a new PIN code to be set. Figure 3-84 State The current SIM lock status is shown as “PUK”. Enter PUKCODE Input the PUK code to reset the PIN code. Enter New PINCODE To reset the PIN code, enter the new PIN code then re-enter it in the second field for confirmation. PIN Counter This displays the PIN code entry count for the current status.
Identification Tab This tab displays the following identification data for the WAN module and the SIM card. Figure 3-85 Vendor This displays the name of the WAN module manufacturer. Module This displays the model number of the WAN module. Revision This displays the GSM/GPRS module revision number. IMEI This displays the telephone’s unique number (International Mobile Equipment Identity). IMSI This displays the subscriber’s identifier (International Mobile Subscriber Identity).
Operator Tab This tab enables the method of connecting the terminal with the operator (automatic connection, manual connection or adapt mode) to be set. The display screen changes depending on the present connection method setting. If the current Connect mode is set to Auto, the connection mode can be set. Figure 3-86 Connect mode Choose the method for connecting the terminal with the operator in the pull-down menu. Apply Button Enables the changes made on this screen.
If the connection method is set to manual connection or adapt mode, seeking is performed to locate connectable operators and the results are listed. The operators to be connected can then be selected from this list. Alternatively, a connection can be established with an operator by directly inputting their operator ID. Figure 3-87 Connect mode Choose the method for connecting the terminal with the operator in the pull-down menu. Scan operator This retrieves operators which can be connected (default).
Status Tab This tab displays the following information on the signal strength, operator connection and network. Figure 3-88 Current This indicates the current received signal strength. Name This displays the name of the operator who is currently connected. ID This displays the ID of the operator who is currently connected. Status This displays one of the current statuses for the WAN module.
Network Entry Tab This tab is for setting the Access Point Name of the service provider. Entry Input a connection name. Service Provider(APN) Input the Access Point Name from the service provider. User Name Input the User Name from the service provider. Password Input the Password from the service provider. Authentication Select the authentication type from the service provider. Apply Button This button applies the settings entered in this tab.
Establishing GPRS Connection To establish GPRS connection, follow the steps below. 1. Configure the WAN power to ON using the WAN Settings tool. 2. Set the SIM lock disable using the WAN Settings tool. 3. Choose the operator using the WAN Settings tool. 4. Create a new connection using the WAN Settings tool. 5. Edit the connection settings using the Connections tool. 6. Establish GPRS connection using the Connections tool.
Step 2: Set the SIM lock disable using the WAN Settings tool 1. Dismount the check from the Enable SIM Lock. If the SIM lock mode is set effect, reset the PIN lock by inputting the correct PIN code in Security tab. The SIM lock mode is reset. 2. If the current SIM lock status shows “UnLock” in State field (see Figure 3.90 ), it is not necessary to reset the PIN lock because the PIN lock function is not used. X X Figure 3-90 3. If the current SIM lock status shows “PIN” in State field (see Figure 3.
Step 3: Choose the operator using the WAN Settings tool 1. Choose your suitable operator in Connect mode field (see Figure 3.92 ) to establish connection with the terminal by enumerating in Operator tab. X X Auto mode: The Auto mode is to establish connection with an operator by referring to the operator list saved in the SIM card. If you wish to set your operator in this mode, choose Auto in Connect mode combo box and tap Apply button.
Adaptive mode: Choose Adapt in Connection mode pull-down menu. Follow the setting procedure detailed in the Manual mode to choose your operator. With this Adaptive mode, if you fail to establish connection, the connection mode is automatically changed to the Auto mode. Figure 3-94 Step 4: Create a new connection using the WAN Settings tool 1. On the WAN Settings screen, select Network Entry tab. 2. Specify a connection name in the ENTRY edit box. 3.
Step 5: Edit the connection settings using the Connections tool. 1. Navigate to Start → Settings → Connections tab and then double tap Connections icon. Figure 3-96 2. Under My Network, tap Manage existing connections. The connection name specified in step 4 appears. Figure 3-97 3. Tap Edit... button. The screen shown below appears.
4. Tap Next. The screen shown below appears. Figure 3-99 5. Tap Next. The screen shown below appears. Figure 3-100 6. Specify User name, Password, and Domain if required by the service provider. 7. Tap Advanced button. The screen shown below appears.
8. Check Use specific IP address checkbox and set IP address if required by the service provider. 9. Tap Servers tab. The screen shown below appears. Figure 3-102 10. Check Use specific server address checkbox and set IP addresses if required by the service provider. 11. Tap ok to return. 12. Tap Finish. Step 6: Establish GPRS connection using the Connections tool 1. Navigate to Start → Settings → Connections tab and then double tap Connections icon. Figure 3-103 2.
3. Tap and hold the connection name until a popup menu appears. Select Connect. Figure 3-104 4. When the connection is established, the icon in the title bar changes to the icon. To confirm the status of the connection, tap the icon. A balloon window shown as below appears. Now you can communicate with the operator via TCP/IP.
3.34 Wireless Manager This applet is for enabling, disabling, and configuring all the wireless capabilities.
3.35 Wireless Configuration This applet is used to configure wireless networks. Wireless Tab Figure 3-107 Network Adapters Tab This tab is used to configure network adapters. Figure 3-108 Note: In some cases, this tab appears as the “ Network Cards ” applet.
3.36 WLAN Power This applet is to set up the settings for power to the integrated WLAN module and to display the detected status of the power. Figure 3-109 WLAN Power Enable Check this box to supply the power to the integrated WLAN module.
3.37 WLAN Settings This applet is to set up the parameters for WLAN configuration. The WLANConfig setting tool starts up by displaying the WLAN settings stored in the ini file if it exists in the terminal, or the default WLAN settings if the file does not exist, and then displays IP tab.
Basic Tab This tab sets up SSID and Security. Click the radio button of Authentication to set “Open” for WEP. Choose either 128 bit radio button or 64 bit radio button for Key Length. For Key Index, up to four kinds of key can be registered. Figure 3-111 Search Button This button invokes the NetSearch utility. Security, Authentication Choose one of the four radio buttons in the Security field. By clicking WPA or WPA2 radio button, authentication in either PSK, EAP-PEAP, or EAP-TLS can be set up.
If EAP-PEAP or EAP-TLS is selected, user name, domain validate server, and etc. can be set up. Figure 3-113 WLAN Tab This tab sets up the basic WLAN settings such as power to the WLAN module, power save mode, WLAN standard, and the threshold level (RSSI level) of roaming.
Detail Settings Tab This tab sets up the detailed settings. It sets up whether or not to show popup window when WLAN is not connected to a network. AdHoc connection, all security settings and a comment for the configuration file (“ini” file) can also be set up. For Advance Settings and Version buttons, refer to the explanation below. Figure 3-115 Advance Settings Button This button displays a window of Advance Settings. The window sets up frequency channels from nos.
Version Button This button displays version information about the application currently running. Figure 3-117 If ok button in Figure 3.117 is clicked, following “Inifile Save Options” screen appears. This screen is to save the settings you made on each tab of Basic, IP, WLAN, and Detail of the WLANConfig tool. Clicking OK button saves the settings made on the four tabs to the ini file, and then starts up the terminal to run in WLAN operation.
4. Application Programs Once an application program is launched by navigating to Start → Programs menu, the application’s operation menu is displayed to continue the process. The following are the application programs implemented in the terminal Table 4.
X X X Internet Sharing This application enables your PC to use the terminal as a modem for connecting to the Internet. The Logging Tool is a tool that the SE uses to analyze causes when a fault occurs. Windows Live Messenger X LogViewer X Messenger X Yes Yes -- -- Yes Yes -- MoUpdate Captures and displays static images. (See Picture&Videos) Module update module Yes -- NetSearch Displays a list of partners via WLAN.
4.1 Today When you turn on the terminal for the first time each day, you will see the Today screen. You can also display it by tapping the Today's icon. On the Today screen, you can see important information at a glance for the day.
4.2 Games The terminal comes with two games; Solitaire and Bubble Breaker.
4.3 ActiveSync This application is an ActiveSync client program for the terminal to communicate with PC.
4.4 Backup Tool This tool backs up user’s data into the memory card and then restores it to deploy the backed up data in the terminal. Applicable data for backup and restoration with the tool • Files on the FlashDisk (except OS components) • Registry • Received mails • Cookie of browser and temporally files • Certificates Note: Changed sizes of the memory area, password and stylus correction related information are not backed up.
2. If you require a password to set in the screen appeared after clicking Backup now button, enter a password in Password field and then press F3 key (= Tab key) to confirm. Enter the same password in Confirm Password field and then press F2 key (= Back Tab keys). Click Yes button to complete the entering of password. Otherwise No button to return to the previous screen. 3. If you choose Yes button in the step above, Backup in Progress screen appears and the backup process is initiated.
Restoration Process 1. Press Restore now button. Figure 4-7 2. Enter the same password in Password field if it has been set up at a time of the backup process and click Yes button. Or, click No button to return to the previous screen.
3. If you choose Yes button in Figure 4.8 , Restore in Progress dialogue screen appears indicating the initiation of restoration. While this screen is being appeared, do not operate any key on the keyboard or on the right and left sides. X X Figure 4-9 4. When the restoration is complete, a buzzer sounds in a short period indicating the completion. Click ok button in the popup message screen and X button at upper-right corner in the screen to close the tool.
Initiating the Tool at Command Line The following explains how to initiate the backup tool at command line. CF_Backup.exe
Troubleshooting Table 4.2 Error messages Process Error message Backup Memory backup was cancelled because no storage card is loaded or because of insufficient storage card capacity. Correct the problem and try again. An error occurred while writing the backup file to card. Return to the menu, delete the backup file that was created, and try again. Memory backup was cancelled due to low battery power! Replace batteries and try it again. Restoration Restore failed because the data file could not be written.
4.5 Calculator The application can be used to operate nine-digit calculator.
4.6 Calendar Calendar is a program that helps you manage your schedule. Appointments and meetings in the Calendar can be viewed using a variety of different formats, and you can set alarms to notify you upcoming appointment times. Figure 4-12 To create a new Appointment, navigate to Menu → New Appointment. See Table 4.3 for menus of the application.
Table 4.3 Menus in the application Menu Description Day Switches to the Day view. Week Switches to the Day view. Month Switches to the Week view. Year Switches to the Month view. Agenda Switches to the Agenda view. Menu New Appointment Creates a new Appointment. Beam Appointment ... Sends the selected Appointment via Bluetooth. Delete Appointment Deletes the selected Appointment. Reply Reply Replies the meeting notice. Reply All Replies the meeting notice to all attendees.
4.7 Contacts Use Contacts to store and manage the names, addresses, phone numbers, and email addresses of friends, co-workers, customers, etc. Figure 4-13 To create a new Contact, tap New. To find a contact, do one of the following: • Begin entering a name in the provided text box until the contact you want is displayed. • Use the alphabetical index displayed at the top of the contact list. • Filter the list by category. In the contact list, navigate to Menu → Filter. Table 4.
4.8 Copy Devices The machine on which the application is installed and settings have been made is the parent terminal, and same content as on the parent terminal is duplicated (overwrite copy) to the child terminals. The time settings on the child terminals are synchronized with the parent terminal. Sent content Table 4-12-1 Target FlashDisk Content All files in the FlashDisk.
Child terminal side 6. Start reception Select “1. Receiver Mode” on the Start screen. Select “1. Normal Copy” on the Selection screen. Enter the group name. If you do not want to divide groups, select “Start” without entering anything. Child Terminal mode starts. Select “Close” to terminate the process. Figure 4-2 Stand by for connection from the parent terminal. Data transmission starts when the connection is completed.
- The child terminal changes the terminal name before communicating. When the reset on the rear is used in this state, the terminal name stays as the changed name from the next reboot. If the rear reset was used, it is necessary to use user disk clear to return to the default state, or reset the terminal name manually.
4.9 Display Demo This application is display some different pattern LCD Display.
4.10 File Explorer This application is a file management program. It can copy files, transmit files, delete files, create folders and delete folders. Figure 4-15 Table 4.5 Menus in the application Menu Description Up Opens the parent folder. Menu Go To My Documents Opens the My Documents folder. My Device Opens the root folder. Folders ... Opens the upper folder. Open Path Opens the network share. Refresh Updates the list with latest information. Show All Files Displays all files.
4.11 FLCE This application enables the terminal to communicate with a PC with the LMWIN utility being running. The communication between the terminal and the PC is established via cradle. Input Command Line Screen Figure 4-16 Screen During Transmission While the communication continues, the following screen will appear. Refer to LMWIN Utility Manual available separately for detail of the operation.
4.12 Getting Started This application displays shortcut menus for setting up the terminal.
4.13 GPS Information This application is for Windows Mobile Professional version. This application displays the positioning information and satellite information retrieved by the GPS module integrated in the terminal (model dependant). GPS module power is related with phone function, therefore when you use this GPS Information, please check Phone power condition in Wireless Manager is On status. (Default setting is On.
”Auto” is displayed if the power to the GPS module is on. FixType This displays the reliability of the positioning data. Either “3D”, “2D” or “-” is shown which means either three or two-dimensional positioning or that positioning is not possible. Received This displays the time of the most recent GPS positioning. S/N Radio The satellite number is shown on the left while the intensity of that satellite’s signal is indicated in the bar.
Disp Heading Arrow The traveling direction is displayed as a red arrow in the Check mode. When the Check mode is turned off, the red arrow is not displayed. U U Version information Figure 4-23 A-GPS function setting If your using SIM Card contract with telephone company is supported A-GPS function, you can set A-GPS setting as below. (About setting detail, please follow telephone company indications.) Change setting detail of “GPSdef.ini” file in Windows folder.
No. Item 1 GPS Fix Mode 2 A-GPS Mode 3 Supl Server URL/ IP Address 4 Port 5 Inifile comment 6 Advance Settings 7 8 − Apply Cancel [OK] button Operation Select A-GPS operation mode. • Stand alone : Without A-GPS • MS-Based : MS-Based mode • MS-Assisted : MS-Assisted mode Select A-GPS execution method. • Control Plane : Control Plane mode • User Plane : User Plane mode Note : When you select “MS-Based” or “MS-Assisted” in GPS Fix Mode, this setting item will be appeared.
4.14 Image Scanner Demo This Aplication is Image Scanner read Demonstration. Figure 4-25 Scan barcode Figure 4-26 Display scanning barcode data. At this time, you can change the following setting.
Scan several barcodes Figure 4-27 You can scan several barcodes continuously or at the same time. And scanned data will be displayed in this screen. Scanning barcode number range is from 2 to 5. When you press trigger key, before scanned data will be cleared. Capture image Figure 4-28 Display capture image data by pressing trigger key and Pre-view will be started again by pressing trigger key.
Scan target barcode Figure 4-29 Display scanning barcode data. At this time, you can change the following setting. z z Change aimer timing Change scanning range Challenge scanning speed Figure 4-30 Figure 4-31 Scan same barcode continuously, then display scanning times and periods. Maximum scanning period is 10 seconds. Default available barcode setting is below.
For confirming high scanning performance, we would like to recommend to set only scanning barcode type. Setting Figure 4-32 This setting will be available in all scanning demonstration except "Challenge scanning speed" demo. This demo is set vibration function is off for keeping high performance.
4.15 Image Scanner Read After scanning 1D bar code symbol or 2D code symbol with the integrated Imager, a result of the scanning is output to application. The output method as well as other relevant parameters for scanning can be determined by the settings made in “ Imager Setting ”. To display the Settings menu, tap the ( ) icon in the taskbar and then choose Settings. X X Operation Procedures 1. Navigate to Start → Programs → Image Scanner Read icon.
4.16 Internet Explorer This application displays web pages on the Internet and Intranet. Figure 4-34 Table 4.6 Menus in the application Menu Description Favorites Displays the Favorites menu. Menu Favorites Displays the Favorites menu. Add to Favorites Adds the current page to the Favorites menu. Go to Web Address Focuses on the Address Bar. Zoom Out Displays the current page smaller. Home Page Returns to the homepage. History Changes the display to a page listed in the history.
4.17 Internet Sharing This application enables your PC to use the terminal as a modem for connecting to the Internet. Figure 4-35 If your terminal has a data connection plan, your PC can use the terminal to connect to the Internet. To use the terminal as a modem using a USB cable, follow the steps below. 1. On your PC, open ActiveSync, and navigate to File → Connection Settings. 2. Clear the Allow USB connections checkbox. 3. 4. 5. 6. 7. Connect the terminal to the PC using a USB cable.
4.18 Messaging This application sends and receives electronic mail that supports the POP3 or IMAP4. Figure 4-36 To set up a new account, see “ Setting Up e-mail Account ”.
Message List Screen Figure 4-37 Table 4.7 Menus in the Message List Screen Menu Description Delete Deletes the selected message. Menu New Creates a new message. Reply Reply Replies to the selected message. Reply All Replies to sender and CC'ed recipients of the selected message. Forward Forwards the selected message. Mark as Read Marks the selected message as read. Move ... Moves the selected message to other folder. Go to Folders ... Changes current folder.
Viewing Screen Figure 4-38 Table 4.8 Menus in the Viewing Screen Menu Replies to the message. Reply Menu Delete Reply Reply Reply All Forward Mark as Unread Move ... View Text Size Language Download Message Send/Receive Description Deletes the message. Replies to the message. Replies to sender and CC'ed recipients of the message. Forwards the message. Marks the message as unread. Moves the message to other folder. Changes the text size. Changes the language. Downloads current message with attachments.
Writing Screen Figure 4-39 Table 4.9 Menus in the Writing Screen Menu Description Send Sends the message. Menu Add Recipient ... Adds another contacts to recipient. Check Names Searches for name stored in Contacts. Insert Picture Inserts a picture into the message as attachment. Voice Note Inserts a voice mail into the message as attachment. File Inserts a file into the message as attachment. My Text Inserts a preset or frequently used phrase. Save to Draft Saves the message to Draft folder.
Setting Up e-mail Account To set up an e-mail account, follow the steps below. 1. Navigate to Setup E-mail or navigate to Menu → Tool → New Account. The screen shown below appears. Figure 4-40 2. Enter your E-mail address and Password. 3. Tap Next. The screen shown below appears. Figure 4-41 4. To allow Auto configuration to connect to the Internet, obtain e-mail server settings (if possible) and enter this information for you, select Try to get e-mail settings automatically from the Internet checkbox. 5.
6. When Auto configuration has finished, tap Next. The screen shown below appears. Figure 4-42 7. Enter Your name (the name you want displayed when you send e-mail) and Account display name that displays in Messaging. 8. Tap Next. The screen shown below appears. Figure 4-43 9. Select the intervals for downloading new messages from the Automatic Send/Receive pull-down menu. 10. Tap Finish. Before tapping Finish, you can tap Options to access additional settings.
If Auto configuration is unsuccessful or if you have an account you access using a VPN server connection, contact your ISP or network administrator for the following information and enter it manually: Table 4.
4.19 Messenger You can use Windows Live Messenger on the terminal to chat with friends or co-workers. You must have a Windows Live ID and password to use this service.
4.20 Mobile Camera This application captures static images. Figure 4-45 Portrait Screen Figure 4-46 Landscape Screen The orientation of static image is depending on the screen orientation of the terminal. See “ Screen ” settings. X X Table 4.11 Buttons of the Toolbar at top Button Description Brightness Setting Opens Brightness Setting screen. List View Launches “Pictures & Videos” application. Folder Changes the folder to which captured image will be saved. X X Table 4.
Table 4.13 Buttons of the Toolbar at right Button Description Trapezoidal Correction Changes the trapezoidal correction to “Correct” or “Don’t correct”. Size Magnification Chooses a capture size from “UXGA”, “QUADVG”, “XGA”, “SVGA”, “VGA” and “1/4VGA”. Chooses an image quality from “Bitmap”, “Fine”, “Normal” and “Economy”. Chooses a magnification from “1.0” and “1.5”.
4.21 NetSearch This application displays a list of partner stations communicable with the terminal via WLAN. • Partner stations on the list can be sorted in the order of field intensity, station name and channel. • Field intensity for the partner station currently being established with the terminal is displayed in green. • The information appeared in the screen is updated every five seconds. • The remote station’s WLAN standard IEEE802.11 b/g icon is displayed at the head of the station name.
Detail Information About Partner Station The screen displays the following detail about the partner station. SSID WLAN standard No. of channels operable Intensity (%) Encryption MAC address Status IP address Physical address Navigate to Start → Programs → Communication → NetSearch icon to initiate the screen.
Detail Button This button displays the log of IP in detail. Figure 4-49 Ping(U4U) Button This button (see Figure 4.45 ) displays the PingUtility screen.
Signal(U5U) Button This button (see Figure 4.45 ) displays the signal strength in dBm and with a yellow straight line that also indicates the signal strength in percent for the operator to judge if the signal in air is ample enough to continue WLAN operation X X Figure 4-51 Options Screen Navigate to Start → Program → Communication → NetSearch icon → Display and then choose Options in the menu to display the following screen.
4.22 NFC Demo Various demos related to scanning NFC cards are performed. Figure 4-53 Read Tag/IC CARD Figure 4-54 Figure 4-55 When the trigger key is pressed, the NFC scanner scans the IC card/tag and displays the scanned data. Press the F2 key or the change screen button (blue) on the screen to change the type of card or tag to scan. Press the F3 key or the change screen button (green) on the screen to change the reading method.
Demonstrate Scanning Speed Figure 4-56 Figure 4-57 When the trigger key is pressed, the NFC scanner scans the same IC card/tag repeatedly, and you can experience how fast data is scanned repeatedly. Press the F2 key or the change screen button (blue) on the screen to change the type of card or tag to scan. Read as Multiple Figure 4-58 Figure 4-59 When the trigger key is pressed, the NFC scanner consecutively scans multiple IC cards or tags and displays the scanned data.
Read as Package Figure 4-60 Figure 4-61 When the trigger key is pressed, the NFC scanner scans multiple IC cards or tags as a batch and displays the scanned data. Press the F2 key or the change screen button (blue) on the screen to change the type of card or tag to scan. Setting Figure 4-62 Switch the settings of the scanning demonstration Press the F2 key or the change screen button (blue) on the screen to change the volume setting to use during scanning.
4.23 Notes This application enables you to jot a quick note. Figure 4-63 To create a new note, tap New. To edit an existing note, tap the file name. Table 4.15 Menus in the List view Menu Description New Creates a new note. Menu View Recording Toolbar Shows or hides Recording Toolbar. Rename/Move Renames or moves the selected notes. Delete Deletes the selected notes. Create Copy Creates a copy of the selected note. Select All Selects all notes in the list. Send ...
Editing Screen Figure 4-65 Table 4.16 Menus in the Editing Screen Menu Description New Creates a new note. Menu View Recording Toolbar Shows or hides Recording Toolbar. Draw Turns Draw mode on or off. Undo Undoes the last action. Redo Redoes the last Undo command. Cut Cuts the selected items in the current note. Copy Copies the selected items in the current note. Paste Pastes the items that are cut or copied. Edit Clear Deletes the selected items in the current note.
4.24 Notification Demo (Buzzer / Vibration) This application is sound some different pattern buzzer and vibration. Figure 4-66 4.25 Phone This application enables you to mobile phone. Figure 4-67 See the phone manual for detail.
4.26 Pictures & Videos This application enables you to view and share digital pictures and videos. Figure 4-68 To view picture and video clips, tap the respective clips. To take a photo, do one of the following: • Tap Camera icon. • Tap Camera on the command bar. • Navigate to Menu → Camera.
Table 4.17 Menus in the List view Menu Description Camera Initiates “Mobile Camera” application. View Displays the selected picture. Menu Camera Initiates “Mobile Camera” application. Send ... Creates a new e-mail message with the selected file attached. Beam ... Sends the selected file via or Bluetooth. Save to Contacts ... Attaches the selected picture to the Contact item. Delete Deletes the selected picture or video. Edit Cut Cuts the selected picture or video. Copy Copies the selected picture or video.
Viewing Screen Figure 4-69 To edit the picture, navigate to Menu → Edit. Table 4.18 Menus in the Viewing Screen Menu Description Send Creates a new e-mail message with the picture attached. Menu Zoom Opens the sub window for zooming the picture. Play Slide Show Plays pictures as slide show. Set as Today Background ... Sets current picture as a Today's wallpaper. Beam Picture Sends current file via Bluetooth. Save Save to Contacts ... Attaches current picture to the Contact item. Save As ...
Editing Screen Figure 4-70 Table 4.19 Menus in the Editing Screen Menu Description Rotate Flips the picture 90 degree. Menu Crop Crops the picture by drawing a box. Auto Correct Adjusts the brightness and contrast levels of the picture. Undo Undoes the last action. Revert to Saved Reloads the last version of the image from the file. Save As ... Saves the picture with new name. 4.
4.28 Remote Desktop Mobile This application is the RDP6.0 based remote desktop client. Figure 4-72 The following is the procedure. 1. Perform the following. • In Computer, enter the name of the computer to which you want to connect. • Enter your User name and Password. • Enter Domain, if required. • Select Save password. 2. Tap Connect. To improve display performance for Remote Desktop Mobile, tap Options to select optimum parameters.
4.29 Search The application can search for files and other items stored in the terminal in the My Documents folder or in a storage card. Figure 4-73 To search for a file or an item, follow the steps below. 1. Enter the file name, word, or other information you want to Search for field. 2. In Type pull-down menu, select a data type to help narrow your search. 3. Tap Search.
4.30 Task Manager This application is used to view running tasks, switch tasks, and stop tasks. See Chapter 3.26 “ Task Manager ” for detail.
4.31 Tasks This application lets you keep track of jobs and tasks you need to do. Figure 4-74 To create a new Appointment, tap Tap here to add a new task or navigate to Menu → New Task. Table 4.20 Menus in the application Menu Description Complete Marks the selected Task as completed. Menu New Task Creates a new Task. Beam Task ... Sends the selected Task via Bluetooth. Delete Task Deletes the selected Task. Edit Cut Cuts the selected Task. Copy Copies the selected Task.
4.32 Windows Live You can use Windows Live on the terminal to find information on the web. You must have a Windows Live ID and password to use this service.
4.33 Windows Media The terminal includes Windows Media Player Mobile, a program that plays music and videos. It can play media files that are stored on the terminal as well as songs and videos that you stream from the Internet. The media player also plays streaming TV, if this service is available from your provider. Windows Media Player Mobile also helps you organize your media files. After you save media files to your terminal, you can create playlists of both music and video files.
Playing Screen Figure 4-77 Table 4.22 Menus in the Play Screen Menu Description Now Playing Switches to Now Playing Screen. Menu Library Switches to Library view. Play/Pause Starts or pauses the playing of a file. Stop Ends the playing of a file. Shuffle/Repeat Shuffle Plays the playlist randomly. Repeat Plays the playlist repeatedly. Full Screen Hides the main menu, toolbar, etc. Options ... Sets up options for playing. Properties Displays the property of the current file.
Now Playing Screen Figure 4-78 Table 4.23 Menus in the Now Playing Screen Menu Description Play Plays the selected file. Menu Library Switches to Library view. Move Up Moves the selected file up in the playlist. Move Down Moves the selected file down in the playlist. Remove from Playlist Removes the selected file from the playlist. Shuffle/Repeat Shuffle Plays the playlist randomly. Repeat Plays the playlist repeatedly. Save Playlist Saves the playlist.
4.34 LogViewer 4.34.1 Overview The Logging Tool is a tool that the SE uses to analyze causes when a fault occurs. It can be used to view the following logs on the terminal. • Execution logs The logs output by the application are called execution logs. Use the log output function to output execution logs. • System logs These are logs output by the OS and drivers. The logs are stored in the log file. They can be viewed using the terminal log viewer.
Output log information The output log information is tabulated below. No. Item 2 Date and time generated Host name 3 User name 4 Device ID 5 Models 6 Build No. 7 Service pack 8 Execution source 9 Process name 1 10 Log attribute 11 Message 12 Other status 13 Terminal name 14 Version No.
System Log Collection System log collection is the function that collects logs that the system outputs to log memory, at regular intervals. Start Under the initial settings, a shortcut for System Log Collection (MoLogSys.exe) is registered in the Startup group (Log.lnk). It starts when the terminal is reset. Stop Run \Windows\MoLogStop.exe to stop system log collection. Stop logging before using the backup tool to backup data.
4.34.2 Terminal Log Viewer The Terminal Log Viewer has the following functions. Functions Subject range specification Display condition specification List display Details display Export Overview Specify the time range for which to display logging files. Specify the range, in terms of other conditions, for which to display logging files. A summary of all logs subject to display is listed. Detailed information is displayed for the log selected in the list display.
Displayed logs The following logs are displayed on each screen. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Item Date generated Time generated Process ID Group ID Event type Host name Terminal name User name Execution source Process name Version No. Message Log attribute Log type Device ID Models Build No.
Display Range Settings screen Use the Display Range Settings screen to specify the range of logs on the terminal to be loaded. No. 1 2 3 4 5 Item Today Yesterday All Period Start date 6 End date 7 8 Set Cancel Contents Only display today s logs. Only display yesterday s logs. Display all logs on the terminal. Specify the period for display. This applies to period specification. Specify the start date of the period in the format YYYYMMDD. This applies to period specification.
List screen The List screen displays logs in a list format. No. 1 Item Period 2 Filter 3 4 Export Page display 5 List 6 7 8 9 Date and time generated Message Details Previous 10 Next 11 Exit Contents Display the Display Range Settings screen and reload logs according to the conditions if the settings have changed. Display the Display Conditions Settings screen and reload logs according to the specified conditions if the condition settings have changed.* Display the Log File Output screen.
No. 1 Item Time header 2 3 6 Class header Attribute header Job name header Item area background color Time 7 Class 8 Attribute 9 Job name 4 5 Contents Sort the displayed logs by date and time generated, in ascending or descending order. Sort the displayed logs by Class, in ascending or descending order. Sort the displayed logs by attribute, in ascending or descending order. Sort the displayed logs by process name, in ascending or descending order.
Display Condition Settings screen Use the Display Condition Settings screen to specify which of the loaded logs to display. No. 1 Item Execution logs 2 System logs 3 Event Class 4 User name 5 Job Name 6 Execution source 7 User identifier 8 9 10 Set Reset Cancel Contents Specify display of execution logs. On: Display Off: Do not display Specify display of system logs. On: Display Off: Do not display Specify event type conditions.
Log File Export screen Use the Log File Output screen to move or copy log files to the specified folder. No. 1 3 Item Export destination folder Folder Selection button Delete check box 4 5 Export Cancel 2 Contents Specify the destination folder for copying or moving logs. Display the Folder Selection screen and set the selection result as the output destination folder. This is only enabled during offline operation. Check to move logs. Execute copying or movement.
Folder Selection screen Use the Folder Selection screen to select the folder from which to copy or move log files. No. 1 2 Item Selected path Folder list 3 4 Input new folder Set button 5 6 7 Open button New button Cancel button Contents Displays the path to the currently-displayed folder. Displays items for moving to higher-level folders and a list of folders existing at the current path. Double click on an item to move to the selected folder. This is the input field for creating a new folder.
Details screen Opens a details screen for the the log selected in the list, and displays detailed information. No. 1 2 Item Date and time generated Event Class 3 Attribute 4 5 6 User name Job Name Execution source Version Message User identifier 7 8 9 Contents Displays the generation time of the displayed log, in the format YYYY/MM/DD HH:MM:SS. Displays the event class of the logs on display clearly, in color and text. System logs are indicated as either "OS", "Driver" or "Boot".
10 11 12 13 User-defined Data Previous Next Close If there is any user-defined data for the displayed log, it is displayed with commas as separators. Displays the previous log on the List screen. Displays the next log on the List screen. Closes this screen and displays the List screen. Log Files There are two types of log files: • Output files The output file for the current log The storage folder is \FlashDisk\Molog (initial setting).
4.34.3 Customization Terminal operation settings file To customize, create the ini file below and reboot the terminal. Item Placement location File name Contents \FlashDisk\System Settings MoLog. ini No.
5. Utilities The utilities listed in the table below are mainly used as a co-process or auxiliary program in user applications. Table 5.1 Utility FCHKCE Auto Setup TextEditor CT Client DiskClean Description Confirms a result of data upload/download. Carries out automatically application at time of reset on the terminal. Rich text editor Measures the WLAN communication status. Format user disk and initialize RAM as the same status of the factory prior to shipment.
5.2 Auto Setup This utility automatically sets up a specified application. Execution Timing The timing for executing “Auto Setup” is as follows. When the terminal is reset; The utility carries out Setup.exe in the FlashDisk. Location of application for automatically starting up with Auto Setup Location of applications to be automatically set up with this utility is CE\ARM folder of the FlashDisk.
5.3 TextEditor This utility can display and edit text files such as log files and ini files. Figure 5-1 Table 5.3 Menus in the application Menu Description File New Creates new text. Open … Displays existing document file. Save Saves document file by overwritten. Save As … Saves document file with a specified name. Recent Files Displays recently displayed document file names. Version Displays version information. Edit Undo Restores the previous operation. Cut Cuts document in the selected range.
5.4 CT Client This utility performs status checking in the WLAN communication together with PC based server. Note: Refer to the “WLAN Survey Tool” manual for detail.
5.5 DSKClean This utility formats the user disk and initializes RAM to the factory condition, and reloads OS again from OS disk. This procedure is called User Disk Clean. See “ Reset ” for detail. X X Starting Up the User Disk Clean 1. Double tap DSKClean.exe located under Windows folder. Then screen shown in Figure 5.2 appears. Tap OK button to continue the rest of the operation. X Figure 5-2 2. The screen below appears to confirm the operation. Tap OK button to continue.
3. The screen below appears, and then approximately 5 seconds later formatting the user disk and initializing RAM will automatically start. Figure 5-4 4. After formatting the user disk and initializing RAM are complete, the terminal suspends and then automatically reloads the OS from the OS disk.
6. PC Application Programs The following are applications run on the host PC which is linked to the terminal via cradle. Table 6.1 Application ActiveSync Windows Mobile Device Center LMWIN FCHK MS; Microsoft. Description Carries out data link with the terminal. Carries out data link with the terminal. Carries out data upload/download. Checks and confirms a result data upload/download. CASIO --- MS Yes Yes Yes Yes --- 6.
6.3 LMWIN This utility interoperates with the FLCE installed in the terminal to perform data upload and download. It is an option available separately. See LMWIN Utility manual for detail. 6.4 FCHK This utility checks and confirms results of data upload/download. See LMWIN Utility manual for detail.
