Hardware manual

Note of operation

In the following case, there is possibility to can not read and write of RFID tag / Contactless Smart Card.

*Several pieces RFID tag / Contactless Smart Card are piled up.

- Do not locate nearby with not scan RFID tag / Contact Smart Card .

- If several cards is located in same pass case inside, you should take out necessary card from pass case.

- Take enough distance between RFID tags / Contactless Smard Cards.

*Exist metal material between antenna and RFID tag / Contact Smart Card

- If you place Contact Smart Card in wallet, you should take out necessary card from wallet.

- If RFID tag is located in metal case, you should take out RFID tag from metal case then execute scan

operation.

*Put on RFID tag / Contactless Smart Card to metal object.

- Keep about 30mm distance between RFID tag / Contact Smart Card and metal object.

- Use metal support tag.

*Do not locate RFID tag / Contact Smart Card to antenna face as vertical position.

- Closer RFID tag / Contact Smart Card to antenna face as parallel position.

Take enough distance

Metal object

××

○