Hardware manual

35
Charge
method
Constant voltage method
- Charge by
integrated battery
charge circuit.
Battery
charge time
(in hours)
Approx. 4.0 (HA-G20BAT)
- Charge by
integrated battery
charge circuit.
Dimensions Approx. 116 (W) x 111.5 (D) x 83.5 (H)
mm
Weight Approx. 280g
• Pin Layout
The pin layout below shows when the cradle is viewed at its front.
1 2 3 4 5 6
Figure 2.8
• Pin Layout and the description
Table 2.12
Pin no. Signal Description Direction
1 V CRADLE Power supply to the terminal and charge the battery
pack installed in the terminal.
-
2 USB_ID Switch-over between USB host and USB client OUT
3 V BUS Power from USB cradle IN/OUT
4 D + USB D + IN/OUT
5 D - USB D - IN/OUT
6 GND GND -
Notes:
1. The output is made from the cradle.
2. The direction “OUT” is for USB mode, or “IN” for LAN mode.