Hardware manual

25
NFC
Carrier frequency 13.56MHz±7kHz
Antenna Magnetic loop antenna
Magnetic field strength (at contact with case)
output 1.5A/m over
Compliant with
ISO10373-6
Field work
Magnetic field strength (at 50mm distance from
case) output 0.15A/m over
Compliant with
ISO10373-7
Bit rate ISO14443 Type A : 106kbps
ISO14443 Type B : 106kbps
FeliCa : 212kbps, 424kbps
ISO15693 : 1.65kbps
Modulation ASK
Modulation rate 10%, 100% modulation
ISO14443 Type A/B, FeliCa : 0mm (Contact with
case)
Read range
ISO15693 : 0mm (Contact with case) to 60mm
(max)*
*Reference value because different with tag
antenna design
Read area 30mm x 60mm Dependent on smart card
Standard:
ISO14443 Type A
(MIFARE Standard /MIFARE Ultralight)
ISO14443 Type B
(JICSAP)
It is recommended to use
smart card that is compliant
with the ISO standard.
FeliCa
®
(JIS X6319)
(FeliCa Standard)
Communication
protocol
ISO15693
(I.CODE SLI/I.CODE S LI-S/I.CODE
SLI-L/my-d VID plain/my-d Light/Tag-it
plus* /Tag-it pro/Tag-it standard)
* There is some not support command.
It takes time for write Tag-it
data. There is command
which is needed retry
operation in application.
SD slot Compatible with SDHC/SDIO.
micro SD Compatible with SDHC.
USB
Full speed (12 Mbps) Baud rate
Low speed (1.5 Mbps)
Host
Power to
external
device
5V/500mA
Client Baud rate Full speed (12 Mbps)
Power/Signal terminals
Pin layout See Table 2.2.
Continue to page 26.