Hardware manual

21
Printer
Method Dropin-type Thermal line dot
Paper width 80 mm or 58 mm The width of paper must be
preset with software prior to
use of the printer. In order to
use 58mm paper, “58mm
Width Adjuster” must be
installed first.
Printing width 72 mm (for an 80 mm/82.55mm paper)
48 mm (for a 58 mm paper)
Paper thickness
55μ∼110μ
Speed 28 lines per second (Max.) See note 1.
Paper Roll paper, label paper Use only CASIO
recommended papers.
Font size “x1”, “x1.5”, “x2”, “x3”, and “x4” sizes are
supported.
Font types ANK/Symbologies (UPC-E, NW-7, Code39,
ITF, Code128, OCR-B, user-defined characters x
128)
Print function In white, black and reverse modes. Mixture of
different font sizes.
Sensor Print position aline
Backside barcode read
-
Dot pitch 0.125mm(8dot/mm)
Dot size
0.22mm (Length) ×0.125mm(Width)
-
1dot line 0.125mm
-
SAM
Standard ISO7816 IC Card standard
General specification 3V, 1.8V SIM card supported
MCR
Application card
F2F FormatISO7811-2、ISO7811-6）
The number of the
simultaneous uptake
trucks
3Tracks
（ISO7811-2、ISO7811-6）
Magnetic data reading side One side
Card run direction Both direction
Card slide speed
100∼1500mm/sec
Continue.