Hardware manual

19
C-MOS Imager
Method C-MOS Imager, 752 x 480 (Wide VGA),
monochrome
Aimer method Laser 650+10nm or -5nm <1 mW
Laser emit angle Redirected downward at 0 degree
Resolution 1D
Stacked 2D
Matrix 2D
: 0.15mm
: 0.169mm
: 0.25mm
PCS 0.45 (minimum)
Focal distance 4.5 inches (11.43 cm)
Daylight for scanning 50,000 Lux or less
Readable 1D
symbologies
UPC-A, UPC-E, EAN8, EAN13, Codabar
(NW-7), Interleaved 2of5 (ITF), MSI, Code11,
Code32, Code39, Code93, Code128 (GS1-128),
IATA, GS1 DataBar Omnidirectional, GS1
DataBar Truncated, GS1 DataBar Limited, GS1
DataBar Expanded
Readable Stacked 2D
symbologies
PDF417, Micro PDF, Code49, Composite,
Codablock F, TLC39, GS1 DataBar Expanded
Stacked, GS1 DataBar Stacked
Readable Matrix 2D
symbologies
Azteck, DataMatrix, Maxicode, QR Code, Micro
QR
Vibrator Notification of scanning bar code
Display
Display device TFT Blanview
®
by OrutusTtech
No. of dots 480 (horizontal) x 640 (vertical) VGA See “Dead Pixels”.
Dot pitch 0.117 (horizontal) x 0.117 (vertical) mm
Gradation 65,536 colors
Display font Scalable font
Backlight LED backlight
Viewing angle 35 degree (Left, Right), 10 degree (Up),
50 degree (Down)
Contrast 10 over
Touch Panel Resistive expression analog touch panel plastic
Hardness Pencil hardness 2H over
Indicator
LED Indicator 1; status of charging battery pack,
Indicator 2; status of communication
Dead Pixels
The LCD panel employed in this product uses high precision and substantial number of components which
commonly cause a small number of the pixels not to light or to remain lit all the time. This is due to the
characteristics of LCD panel yield in accuracy over 99.99% and permissible.
Continue.