Hardware manual

15
1.4.4 HA-G32DCHG
The following external views show the Dual Battery Chargers (HA-G32DCHG, HA-G32DCHG-CN). Refer
to Table 1.6 for each referenced part on the charger.
Views
Figure 1.5
Table 1.6
No. Name Description
This LED indicates the charge status of battery pack(s).
Off : Battery pack is not mounted.
Red : Charging.
Flashing Red : Problem on the battery pack.
Green : Charging complete.
1 Charge Indicator LED
Flashing Green : Standby.
2 Power Supply Terminal Power is supplied to the terminal via these contacts.
3 AC Adaptor Jack This is used to supply power by connecting the dedicated AC adaptor,
AD-S42120, here.
4 Dual Battery Charger
Connection Port
Used to connect multiple Dual Battery Chargers each other.
5 Connection Bracket
Attachment Holes
The connection bracket attaches here when you connect multiple Dual
Battery Chargers.