Hardware manual

14
1.4.3 HA-L30CHG, HA-L35CHG
The following external views show the Cradle-type Battery Chargers (HA-L30CHG, HA-L30CHG-CN) and
Car Mounted Cradle-type Battery Chargers (HA-L35CHG, HA-L35CHG-CN). Refer to Table 1.5 for each
referenced part on the charger.
Views
Figure 1.4
Table 1.5
No. Name Description
1 Terminal Detect
Switch
This switch detects when the terminal is mounted correctly on the
Battery Chager .
2 Mount Hooks Used to hook the terminal in the Battery Charger.
3
Removal Button
Used to remove the terminal in the Battery Charger.
4 Power Terminals Power is supplied to the terminal via these contacts.
This LED indicates the power status and the mounting status of the terminal.
Off : The terminal is not mounted.
5 Power LED
On in green : Power is turned on and the terminal is mounted correctly.
6
Power Switch Turns on and off the power.
7 AC Adaptor Jack Connect the dedicated AC adaptor, AD-S42120, here.
8 Car plug code Jack Connect the dedicated Car plug code , here.