Hardware manual

13
Table 1.4
No. Name Description
1 Terminal Detect Switch This switch detects when the terminal is mounted correctly on the
cradle.
2 Mount Hooks Used to hook the terminal in the cradle.
3
Removal Button
Used to remove the terminal in the cradle.
4
Power Supply/Data
Communication terminal
These contacts are used for communication and supplying power to
the terminal.
This LED indicates the power status and the mounting status of the
terminal in the cradle.
Off : The terminal is not mounted. Or, the AC adaptor is
not connected.
5 Power LED
On in Green : Power is turned on, and the terminal is correctly set
in the cradle.
6
Power Switch Turns on and off the power.
7 USB Client Port This port is used to transmit data (download or upload) by
connecting the Cradle to a PC using USB cable (DT-380USB). The
dedicated driver must be installed in the PC before connecting the
Cradle to the PC.
8 USB Host Port This port is used to connect a USB peripheral device.
9 LAN Port
(for HA-L62IO)
This port is used for connecting the cradle to PC or hub via LAN
cable so that data can be transmitted (uploaded or downloaded).
This LED shows the LAN connection status.
Off : LAN cable not connected correctly.
10 LAN Connection Status
LED
(for HA-L62IO)
On in Green : LAN cable connected correctly.
This LED shows the LAN operation status.
Off : No communication.
11 LAN Communication
Status LED
(for HA-L62IO)
On in Green : Communication in progress.
12 Selector Switch This switch is used to switch between the USB host port and USB
client port.
13 AC Adaptor Jack Connect the dedicated AC adaptor, AD-S42120, here.