Specifications

4.2 HA-H62IO
Use the dedicated AC adaptor (AD-S42120B) for supplying power to the HA-H62IO Ethernet
Cradle. Ensure that you connect the AC adaptor to the cradle before starting communication
between the IT-800 and PC via the cradle. Follow the steps below to connect the power supply to
the IT-800 using the dedicated AC adaptor.
1. Plug the AC adaptor into the AC adaptor jack on the back of the Ethernet Cradle.
Figure 4.6
2. After connecting the AC adaptor to the power cable, plug in the plug of the power cable to an
electrical outlet.
Figure 4.7
3. Set the selector switch on the back of the Ethernet cradle to the port that will be used. Set the
switch to “LAN” to use the LAN port or to “USB” to use the USB port.
Figure 4.8
21