Hardware manual

33
DIP switch 8 switches See page 35.
Input
Detection switch for the terminal Push switch
Input voltage DC 12V±5%
Consumption current Approx. 2,200 mA While supplying powe
r
or transmitting data.
Plug EIAJ RC-5320A Class 4 Center pin; plus
Input from AC
adaptor
AC Adaptor AD-S42120BE
AD-S42120BE-CN
Output voltage DC 10V±5%
Output current 1,800 mA (maximum)
Charge method Constant voltage With the current limite
r
Charge time Approx. 8.0 hours For DT-9723LIC,
DT-9723LIC-CN
Power
Charge/
Power supply
Power supply
terminal
See note 2.
Weight Approx. 660 g
Dimensions Approx. 130 (W) x 206 (D) x 104 (H) mm
Notes:
1. The maximum communication speed at 4 Mbps is possible only when the terminal is connected
to Host PC via the USB interface.
2. “Power supply terminal” is located on your left side when you face to the front side of the
Cradle with the power switch being located on your right side.
GND
Power supply
terminal