Hardware manual

31
2.2 HA-B30CHG
The following table explains about the specifications of the Cradle-type Battery Charger
(HA-B30CHG, HA-B30CHG-CN).
Table 2.6
Parameter Specification Remark
No. of LEDs 1
No. of display
colors
2 In red and green
Display Status LED
Display content Power status (“POWER”)
Input Detection switch for the terminal Push switch
Input voltage DC 12V±5%
Consumption
current
Approx. 2,100 mA While supplying powe
r
or transmitting data.
Plug EIAJ RC-5320A Class 4 Center pin; plus
Input from
AC adaptor
AC Adaptor AD-S42120BE
AD-S42120BE-CN
Input from
cigarette
lighter
Cable DT-827CAC
DT-827CAC-CN
See note 1.
Output voltage DC10V±10%
Output current 1,800 mA (maximum)
Charge method Constant voltage With the current limite
r
Charge time Approx. 8.0 hours For DT-9723LIC,
DT-9723LIC-CN
Power
Charge/Pow
er supply
Power supply
terminal
See note 2.
Weight Approx. 630 g
Dimensions Approx. 130 (W) x 206 (D) x 104 (H) mm
Notes:
1. The cable DT-827CAC (or DT-827CAC-CN) is used to supply the power to HA-B30CHG (or
HA-B30CHG-CN) from the cigarette lighter installed in a vehicle.
2. “Power supply terminal” is located on your left side of the charger when you face to the front
side with the power switch being located on your right side.
GND
Power
supply