Hardware manual

24
Pin Layout
Figure 2.2
14-pin serial interface
Interface RS-232C level interface See note 4.
Synchronization Start and stop bits synchronization
Baud rate 300, 600, 1200, 2400, 4800, 9600,
19.2K, 38.4K, 57.6K, 115.2K
Output power to external 5.0 V±10%, Max. 300 mA
Connector A3A-14DA-2SV Manufactured by Hirose Electric
Co., Ltd
Pin layout See Table 2.3.
Pin configuration table See Table 2.3.
SD slot
SD memory card 1 slot
PC card slot
Type PC card Type I/II (3.3V/5.0V)
Max. 500 mA at 3.3V
Power
Max. 1,000 mA at 5.0V
Magnetic card reader
Standard ISO Tracks 1, 2, 3 (ISO7811)
No. of tracks for
concurrent read-in
3
Sides of data reading Both
Orientation One direction (left to right with the
front side being faced to the operator)
Card running speed 10 to 150 cm per second
Speaker
Alarm sound 70 dB or greater
Voice sound 60 dB or greater
Key click sound 50 dB or greater
Power
Operating battery Lithium-ion battery x 1 7.4 V 2,200 mAH.
Memory backup battery Lithium rechargeable battery x 1 Built-on board/irreplaceable.
Approx. 15 hours
- JEITA operation mode A.
- See note 5.
Battery life
Approx. 12.6 hours
- JEITA operation mode D.
- See note 5.
Continue.