Hardware manual

22
Paper Roll paper, formed papers (1-ply, 2-ply),
label paper
Use only CASIO recommended
papers.
Font size “x1”, “x1.5”, “x2”, “x3”, and “x4” sizes are
supported.
Font types ANK/Symbologies (UPC-E, NW-7,
Code39, ITF, Code128, OCR-B,
user-defined characters x 128)
Print function In white, black and reverse modes. Mixture
of different font sizes.
IrDA
Standard IrDA Version 1.1 The module is installed on
the right side.
Method Half-duplex
Synchronization Start and stop bits, frame synchronization
Baud rate 9,600, 115,200, 4 Mbps
Communication range 0 (contact) to 1 m (0.25 m for 4 Mbps)
Bluetooth
Standard Bluetooth
®
specification Ver. 1.2
Communication range Approx. 3 m See note 2.
Frequency range 2402 to 2480 MHz
Output power Max. 3 dBm (PowerClass2)
Transmit power 1.0 mW
Emission designation F1D ITU code
Modulation type GFSK
Number of channels 79
Channel spacing 1 MHz
Bandwidth 1 MHz
Antenna type IFA
Antenna gain 0.35 dBi (maximum)
8-pin serial interface
Interface RS-232C level interface See note 3.
Synchronization Start and stop bits synchronization
Baud rate 300, 600, 1200, 2400, 4800, 9600, 19.2K,
38.4K, 57.6K, 115.2K
Output power to
external
5.0 V±10%, Max. 300 mA
Connector TSC7926-18-30 Manufactured by Hosiden
Corporation
Pin layout See Table 2.2.
Pin configuration table See Table 2.2.
Continue to page 24.