Hardware manual

15
See Table 1.6 for names of each part and its description.
Table 1.6 Names of parts and the descriptions
No. Part Name Description
This lamp indicates whether the system is operating normally. It indicates
the system status and whether or not communication with the system can be
performed regardless of whether or not the terminal is mounted.
Off : System is not operating.
1 System Status Indicator
Lamp
Green : System is operating.
This lamp shows when the terminal is performing communication.
Off : No communication being performed.
Green flashing : Communication in progress.
2 Communication
Indicator Lamp
Red : Problem with connection between Bridge Satellite and
the terminal.
This lamp indicates the power status and mounting status of the terminal.
Off : Power off.
Green : Power on and communication is in progress.
3 Power Indicator Lamp
Red : Power on, but the terminal is not mounted.
4 Terminal Detect
Switches
These switches detect a terminal when it is correctly mounted in the Bridge
Satellite Cradle.
5 IR Port This port exchanges data with the terminal via IR port.
6 Power Contacts Power is supplied to the terminal via these contacts.
7 Power Key Turns on and off the power.
8 AC Adaptor Jack Connect the dedicated AC Adaptor here to supply power.
9 RS-422 Port This port is used when connecting with another Bridge Satellite Cradle.
10 RS-232C Port This port is for connecting an RS-232C cable for connection to PC for
transfer of data and file. Use of the RS-232C port requires installation of the
special driver on PC.
11 USB Port This port is for connecting a USB cable for connection to PC for transfer of
data and file. Use of the USB port requires installation of the special driver
on PC.
12 DIP Switches Use these switches to configure the Bridge Satellite Cradle.