Hardware manual

13
1.4.2 HA-B30CHG
The following external views show the Cradle-type Battery Charger (HA-B30CHG, HA-B30CHG
-CN).
Figure 1.3
Table 1.5 Names of parts and the descriptions
No. Part Name Description
1 Power Status Indicator This LED indicates the power status.
2 Detection Switches These switches are to detect the terminal being mounted in the charger.
3 Power Supply Terminals These terminals are to provide the power to the terminal in the charger.
4 Power Switch Turns on and off the power.
5 Power Jack Power jack to connect the dedicated AC Adaptor for supplying the power.
Top
Front
Bottom
Right Rear