Hardware manual

12
See the following table for names of each part and description.
Table 1.4 Descriptions of the parts
No. Name Description
1 SD Memory Card Slot Slot for inserting SD memory card.
2 L Program Key This key can be assigned to any function available. In the imager model, use
it to scan bar codes, etc.
3 Roll Paper Holder Roll paper is placed in this holder. Use the optional Paper Holder when using
a formed sheet paper.
4 Splash Protect Cover
and Paper Cutter
Printed roll paper is torn off here. The paper cutter is provided with a splash
protect cover. Open the cover when printing. The paper cutter is revealed
when the cover is opened.
5 Power Key Press this key to turn on or off the power.
Indicator 1 (Left side) This indicator lights green when charging the battery pack is complete or red
during charging.
6
Indicator 2 (Right side) This indicator flashes or lights according to the settings of the application
software installed in the terminal.
7 Speaker Generates audio sound and buzzer tone.
8 Brightness Sensor This sensor detects the brightness in the surroundings. The backlight and key
backlight can be controlled automatically according to settings. Be careful
not to inadvertently block the sensor.
9 LCD Panel/Touch
Screen
Displays text, operations, indicators and so forth. In addition, operations can
be performed and data can be input using the stylus provided.
10 Stroke Keys There are a total of 19 keys including function keys and numeric keys. Each
numeral or symbol on the key tops is backlit.
11 8-pin Serial Interface
Connector
For connecting a bar code reader and so forth.
12 R Program Key This key can be assigned to any function available.
13 Power Jack The dedicated AC Adaptor is connected to this jack when charging the
lithium-ion battery pack.
14 IR Port This is used for IR communication with another terminal or the Bridge
Satellite Cradle.
15 Battery Pack Cover
Lock Switch
Turn this switch when opening and closing the battery pack cover.
16 Battery Pack Cover This is the cover for the battery compartment.
17 PC Card Slot For connecting a PC card available from a third party. Remove the cover to
install a PC card.
18 Hand Strap Hook Hook the hand strap here.
19 14-pin Serial Interface
Connector
Provided for future use.
20 Power Terminals Terminals for supplying power from the Bridge Satellite Cradle or
Cradle-type Battery Charger.
21 Neck Strap Hooks Hook the neck strap here.
22 Magnetic Card Reader Magnetic cards are read by passing through this magnetic card reader.
23 Reset Switch Press to reset the terminal.
24 Screen Protect Cover
Mounting
Remove the screws when attaching the Screen Protect Cover.
25 CMOS Imager Reads 1D and 2D symbologies.