CASIO IT-3100 Series Hardware Manual (Version 1.02) CASIO Computer Co., Ltd. Copyright ©2008. All rights reserved.
Table of the Contents Chapter 1. 1.1 1.2 1.3 1.4 1.4.1 1.4.2 1.4.3 1.4.4 1.4.5 1.4.6 1.4.7 1.4.8 1.4.9 1.4.10 1.4.11 1.4.12 1.4.13 1.4.14 Chapter 2. 2.1 2.1.1 2.1.2 2.2 2.3 2.3.1 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 Chapter 3. Chapter 4. 4.1 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.1.6 4.1.
4.1.8 4.1.9 4.1.10 4.1.11 4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.2.5 4.2.6 4.2.7 4.3 4.3.1 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 4.3.7 4.3.8 4.3.9 4.3.10 4.3.11 4.4 4.4.1 4.4.2 4.4.3 4.4.4 4.4.5 4.4.6 4.4.7 4.5 4.5.1 4.5.2 4.5.3 4.5.4 4.5.5 4.5.6 4.5.7 4.5.8 Chapter 5. 5.1 5.2 5.3 Chapter 6. 6.
No part of this document may be produced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of CASIO Computer Co., Ltd. in Tokyo Japan. Information in this document is subject to change without advance notice. CASIO Computer Co., Ltd.
Editorial Record Manual Version no. 1.00 1.01 Date edited Page Content August 2008 August 2008 all 6, 65 Original version In Chapters 1 and 5, the explanation about DT-882RSC and DT-883RSC cables is deleted because of phased out products. Option power cords for AD-S42120B are added in Chapter 1.2. Explanation about DT-9020ADP AC Adaptor is deleted because of phased out product. In Chapter 1.2, the content in Table 1.2 is updated. In Chapter 1.3, Figure 1.1 is updated. In Chapter 2.
1. 1.1 Overview of the Products Features Supporting the outstanding development environment • Windows® CE 5.0 English Version as the integrated OS • Visual Studio 2005 • Visual Studio .NET 2003 (Windows® CE .NET Utilities v 1.1 for Visual Studio .NET 2003) • eMbedded Visual C++ 4.0 Outstanding performance/Large memory • High performance CPU Marvell® PXA255 Application Processor (maximum 400 MHz) • Large capacity memory RAM : 128MB F-ROM : 96MB Enhanced communication functions • Enables WWAN, WLAN, etc.
1.2 Available Models and Options Table 1.1 List of the available models Model no. IT-3100M53E IT-3100M54E IT-3100M55E IT-3100M55U IT-3100M56E IT-3100M56U IT-3100M53E-CN IT-3100M54E-CN IT-3100M55E-CN IT-3100M56E-CN Blueto oth Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes MCR Yes Yes Yes Yes Yes - C-MOS Imager Yes Yes Yes Yes Yes Yes RS-232C I/F 8-pin 14-pin Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Printer Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Remark See note.
Table 1.2 List of the options Model no.
The accessories in the table below are accompanied in each individual carton box of IT-3100 series. Accessories accompanied in each dedicated option are not listed in the table below. Table 1.
1.3 Options and Interfaces Figure 1.
1.4 External Views 1.4.1 IT-3100 Left Front Right Rear Figure 1.2 Notes: • The C-MOS imager (item no. 25) comes with IT-3100M55E, IT-310055U, IT-3100M56E and IT-3100M56U. For non-CMOS imager models, the 8-pin serial interface is available instead. • The magnetic card reader (item no. 22) comes with IT-3100M54E, IT-3100M55E and IT-3100M55U.
See the following table for names of each part and description. Table 1.4 No.
1.4.2 HA-B30CHG The following external views show the Cradle-type Battery Charger (HA-B30CHG, HA-B30CHG -CN). Top Front Right Rear Bottom Figure 1.3 Table 1.5 No. 1 2 3 4 5 Names of parts and the descriptions Part Name Power Status Indicator Detection Switches Power Supply Terminals Power Switch Power Jack Description This LED indicates the power status. These switches are to detect the terminal being mounted in the charger. These terminals are to provide the power to the terminal in the charger.
1.4.3 HA-B61IO The following external views show the Bridge Satellite Cradle (HA-B61IO, HA-B61IO-CN). Top Front Right Bottom Figure 1.
See Table 1.6 for names of each part and its description. Table 1.6 No. 1 2 3 4 5 6 7 8 9 10 11 12 Names of parts and the descriptions Part Name Description System Status Indicator This lamp indicates whether the system is operating normally. It indicates Lamp the system status and whether or not communication with the system can be performed regardless of whether or not the terminal is mounted. Off : System is not operating. Green : System is operating.
1.4.4 DT-9721CHGE The following external view shows the Battery Charger (DT-9721CHGE, DT-9721CHGE-CN). Figure 1.5 Note: The above figure shows the DT-9721CHGE (DT-9721CHGE-CN) with a power cord available in Japan. The power cord accompanied with the charger for overseas destinations is not in the same form shown. 1.4.5 DT-9723LIC The following external views show the Battery Pack (DT-9723LIC, DT-9723LIC-CN). Figure 1.
1.4.6 AD-S10095A The following external view shows the AC Adaptor (AD-S10095AE, AD-S10095AU). Figure 1.7 1.4.7 AD-S42120B The following external view shows the AC Adaptor (AD-S42120BE, AD-S42120BE-CN). Figure 1.8 Note: The AD-S42120BE and AD-S42120BE-CN do not accompany a power cable.
1.4.8 HA-B34AT The following external view shows the Battery Charger Car Mount Unit (HA-B34AT, HA-B34AT -CN). 2 1 2 Figure 1.9 Note: The figure above shows a view of HA-B34AT Battery Charger Car Mount Unit (gray part) and HA-B30CHG Cradle-type Battery Charger being assembled together. Table 1.7 Names of parts and the descriptions No. 1 Part Name Jack for Car Power Cable 2 Removal Buttons R and L Description Connect the dedicated Car Power Cable from the cigarette lighter in a vehicle.
1.4.9 HA-B90DCV The following external view shows the Screen Protect Cover (HA-B90DCV). Figure 1.10 1.4.10 HA-B93PH The following external view shows the Formed Sheet Paper Holder (HA-B93PH, HA-B93PH-CN). Figure 1.11 1.4.11 DT-888RSC The following external view shows the RS-422 Modular Cable. Figure 1.
1.4.12 DT-887AXA The following external view shows the RS-232C Cross Cable (DT-887AXA, DT-887AXA-CN). Figure 1.13 1.4.13 DT-380USB The following external view shows the USB Cable. Figure 1.14 1.4.14 HA-B80AX The following external view shows the RS-232C Cross Cable (HA-B80AX, HA-B80AX-CN). Figure 1.
2. 2.1 Hardware Specifications IT-3100 Tables 2.1 to 2.4 explain the hardware specifications of the IT-3100 series (all models). Table 2.1 Parameter CPU/Memory CPU Operating system RAM FROM (system) FROM (user) Display Device Resolution Backlight Specification Marvell® PXA255 runs at 400MHz (maximum) Microsoft®Windows® CE Ver. 5.0 128 MB 64 MB 32 MB (user area: approx. 30 MB) 3.
Paper Font size Font types Print function IrDA Standard Method Synchronization Baud rate Communication range Bluetooth Standard Communication range Frequency range Output power Transmit power Emission designation Modulation type Number of channels Channel spacing Bandwidth Antenna type Antenna gain 8-pin serial interface Interface Synchronization Baud rate Output power to external Connector Pin layout Pin configuration table Roll paper, formed papers (1-ply, 2-ply), label paper “x1”, “x1.
Notes: 1. The printing speed has been measured under the following conditions; • Printing Kanji with 16-dot mode character and space is not allowed between lines. • One pry roll paper is used. • The battery pack is fully charged before printing. 2. The communication range can be varied depending on the surrounding environment. 3. IT-3100M55E, IT-3100M55E-CN, IT-3100M55U, IT-3100M56E, IT-3100M56E-CN and IT-3100M56U do not integrate the serial interface. 4.
Pin Layout Figure 2.2 14-pin serial interface Interface Synchronization Baud rate Output power to external Connector Pin layout Pin configuration table SD slot SD memory card PC card slot Type Power Magnetic card reader Standard No.
Memory backup RAM RTC 10 minutes while replacing the operating battery. See note 6. 1 day from when operating battery low warning appears. 1 day from when operating battery low warning appears. Charging the operating battery Ways to charge the Use AC Adaptor (AD-S10095A) while the battery pack battery pack is being installed in the terminal. Use the Cradle-type battery charger while the battery pack is being installed in the terminal.
Notes: 4. When the battery pack is a brand-new charged fully, and the surrounding temperature is in ordinary level. 5. When the backup battery is a brand-new, and the surrounding temperature is in ordinary level. 6. When the terminal’s power is turned off. The memory backup battery is a brand-new, and the surrounding temperature is in ordinary level. 7. When the terminal’s power is turned off. The battery pack is a brand-new, and the surrounding temperature is in ordinary level. 8.
2.1.1 14-pin Serial Interface Connector Figure 2.3 Figure 2.
2.1.2 Reference for C-MOS Imager Performance The CMOS imager performance reference is provided in this chapter as a guide to be utilized by the user. The user can refer to these reference values in the table for his or her specific business application. All the reference values have been came out from the assessment tests carried out under the basic performance conditions below. However, it does not necessarily imply that the values are guaranteed and optimum to any kind of business applications.
Angle Pitch Skew Dead zone Tilt 1D (Code39 10 mil (0.25 mm)) 2D Stacked (PDF417 10 mil (0.25 mm)) 2D Matrix (Aztec 20 mil (0.5 mm)) 1D (Code39 10 mil (0.25mm)) 2D Stacked (PDF417 10 mil (0.25 mm)) 2D Matrix (Aztec 20 mil (0.5 mm)) Pitch and Skew 1D (Code39 10 mil (0.25 mm)) 2D Stacked (PDF417 10 mil (0.25 mm)) 2D Matrix (Aztec 20 mil (0.5 mm)) ±35° ±35° At 110 mm from the LED emission port. At 110 mm from the LED emission port. ±35° At 110 mm from the LED emission port.
Basic read conditions: Test chart Resolution PCS Depth Pitch angle Skew angle Tilt angle Surrounding temperature Surrounding humidity Surrounding illumination Background of the symbol Conditional Judgment : Dedicated test pattern (1D, 2D Stacked) : 1D; 0.25 mm, 2D; 0.5 mm : 0.9 or greater : 110 mm from the LED emission port : α = 0 degree : β = 10 degree : γ = 0 degree : 25 ºC : 30 to 50 % : 450 to 550 Lux. : White : Readable 7 times or more per 10 times of scanning Figure 2.
2.2 HA-B30CHG The following table explains about the specifications of the Cradle-type Battery Charger (HA-B30CHG, HA-B30CHG-CN). Table 2.6 Display Input Power Parameter Status LED No. of LEDs No.
HA-B61IO The following tables explain about the specifications of the Bridge Satellite Cradle (HA-B61IO, HA-B61IO-CN). Table 2.7 Parameter Standard Comm. method Synchronization Specification Remark IrDA Ver. 1.1 compatible Half duplex Start and stop bits method, Frame synchronization 9600, 115.2 Kbps, 4 Mbps See note 1. (maximum) USB Ver. 1.1 compatible 12 Mbps (maximum) 1. VBus 1 2 2. –Data (D-) 1 2 3. +Data (D+) 4 3 4. GND 4 3 Comm.
Input Power DIP switch Detection switch for the terminal Input from AC Input voltage adaptor Consumption current Plug AC Adaptor Charge/ Power supply 8 switches Push switch DC 12V±5% Approx. 2,200 mA EIAJ RC-5320A Class 4 AD-S42120BE AD-S42120BE-CN DC 10V±5% 1,800 mA (maximum) Constant voltage Approx. 8.0 hours Output voltage Output current Charge method Charge time Power supply terminal See page 35. While supplying power or transmitting data.
Status Indication with LEDs Various operational statuses on the Bridge Satellite Cradle (HA-B61IO, HA-B61IO-CN) can be displayed using the LEDs. The following table describes LED modes and their meanings. Table 2.8 Parameter LED Power status indicator Power OFF (“POWER”) IT-3100 is not mounted IT-3100 is mounted Comm. status indicator Break of communication (“DATA”) Connection between cradle and PC is not valid. Communication is in progress Line status indicator No comm.
2.3.1 DIP Switch Setting for HA-B61IO The DIP switch is located on the bottom side of the Bridge Satellite Cradle (HA-B61IO, HA-B61IO-CN). Change the ON/OFF settings according to your required system configuration. The new settings do not go into effect until the power switch is turned off and then back on again. Figure 2.6 Note: Other DIP switch settings are used for testing and inspection purposes. Because of this, you should never use any DIP settings other than those described above.
2.4 DT-9721CHGE Following tables explain about the specifications of the Battery Charger (DT-9721CHGE, DT-9721CHGE-CN). Table 2.9 Parameter Charge method Charge period Consumption power Input Weight Dimensions Specification Fixed voltage-and-current Approximately 3 hours until the LED goes out 18 W 39 VA (at AC240V) Approx. 140 g Approx. 56 (W) x 44 (H) x 107 (D) mm Remark With the current limiter See note.
2.6 AD-S10095A The following table explains the hardware specifications of AC Adaptors (AD-S10095AE, AD-S10095AU). Table 2.12 Parameter Original manufacturer’s model no. Specification SA115B-09U Input requirements AC100 to 240V AC90 to 264V 50 Hz 400mA (Max.) DC9.5V±5% DC1.
2.7 AD-S42120B The following table explains the hardware specifications of the AC Adaptors (AD-S42120BE, AD-S42120BE-CN). Table 2.13 Parameter Original manufacturer’s model no. Specification SA145A-1240U-6 Type Input requirements Switching regulator 100 to 240VAC 90 to 264VAC 50 or 60 Hz 47 to 63 Hz 1200mA (maximum) 0.
2.8 AD-S10095A Table 2.14 Parameter Original manufacturer’s model no. Specification SA115B-09U Input requirements Rated input voltage Input voltage tolerance Nominal frequency Input current AC100 to 240V AC90 to 264V Rated output voltage Rated output current Minimum output current No load power consumption DC9.5V±5% Load regulation Ripple noise 75% (minimum) Less than ±5% 150 mVp-p (max.) Output requirements Efficiency 50 Hz 400mA (Max.) 47 to 63 Hz 100VAC/50Hz with full road DC1.0A 0A 0.
2.9 HA-B34AT The following table explains about the specifications of the Battery Charger Car Mount Unit (HA-B34AT, HA-B34AT-CN). Table 2.14 Weight Dimensions Specification Approx. 700 g Approx. 130 (W) x 206 (D) x 104 (H) mm Remark In the status to mount on Cradle-type Battery Charger. 2.10 HA-B90DCV The following table explains about the specifications of the Screen Protect Cover. Table 2.15 Weight Dimensions Specification Approx. 28 g Approx. 94 (W) x 85 (D) mm Remark Projection is not included.
3. Product Identification and Reference Numbers On the back of the terminal and its options (major options only), there is a bar code and numbers printed on label as shown in Figure 3.1 below. This bar code is represented by 15 digits of Code128 symbology and by alphanumeric characters beneath the bar code. The numbers 1 to 9 in the figure represent identification and references of the terminal while the numbers 10 to 14 represent a manufacturing reference reserved by the manufacturer.
4. Quality References This chapter describes about references of the terminal and its dedicated major options concerned with environmental performance, compliance, mechanical, electric durability, and etc. 4.1 Environment Performance 4.1.1 IT-3100 The following table explains environmental performance on the IT-3100 series (all models). Table 4.1 Parameter Temperature Operation For quality print Specification -20 to 50 ºC Condition 0 to 40 ºC while mounting on Cradle. See note 1.
4.1.2 HA-B30CHG The following table explains environment performance on the Cradle-type Battery Charger (HA-B30CHG, HA-B30CHG-CN). Table 4.2 Parameter Temperature Operation Storage Humidity Operation Storage Storage in carton box Temperature Humidity Specification Condition 0 to 40 ºC -10 to 50 ºC 30 to 80 % RH 30 to 90 % RH -10 to 50 ºC 30 to 90 % RH No condensation No condensation 4.1.
4.1.4 DT-9721CHGE The following table explains environment performance on the Battery Charger (DT-9721CHGE, DT-9721CHGE-CN). Table 4.4 Parameter Temperature Operation Storage Humidity Operation Storage Storage in carton box Temperature Humidity Specification Condition 0 to 40 ºC -10 to 50 ºC 30 to 80 % RH 30 to 90 % RH -10 to 50 ºC 90 % RH or less No condensation No condensation 4.1.5 DT-9723LIC The following table explains environment performance on the Battery Packs (DT-9723LIC, DT-9723LIC-CN).
4.1.6 AD-S10095A The following table explains environment performance on the AC Adaptors (AD-S10095AE, AD-S10095AU). Table 4.6 Parameter Temperature Operation Storage Humidity Operation Storage Specification Condition 0 to 50 ºC -20 to 80 ºC 20 to 85 % RH 10 to 95 % RH 4.1.7 AD-S42120B The following table explains environmental performances on the AC Adaptors (AD-S42120BE, AD-S42120BE-CN). Table 4.
4.1.9 HA-B90DCV The following table explains environment performance on the Screen Protect Cover. Table 4.9 Parameter Temperature Non operation Humidity Non operation Storage in carton box Temperature Humidity Specification Condition -20 to 70 ºC 5 to 90 % RH No condensation -20 to 60 ºC 90 % RH or less No condensation 4.1.10 HA-B93PH The following table explains environment performance on the Formed Sheet Paper Holder (HA-B93PH, HA-B93PH-CN). Table 4.
4.2 Electrical Performance 4.2.1 IT-3100 The following table explains electrical performance on the IT-3100 series (all models). Table 4.12 Parameter Power consumption Anti-static strength Malfunction Destruction Specification DC 4.5A, 7.4V to 10.0V ±6 KV ±12 KV Remark 150 pF/330 ohm 4.2.2 HA-B30CHG The following table explains electrical performance on the Cradle-type Battery Charger (HA-B30CHG, HA-B30CHG-CN). Table 4.13 Parameter Current consumption Specification Approx. 0.1 A Approx. 2.
4.2.3 HA-B61IO The following table explains electrical performance on the Bridge Satellite Cradle (HA-B61IO, HA-B61IO-CN). Table 4.14 Parameter Current consumption Specification Approx. 0.1 A Approx. 2.2 A Voltage Anti-static strength Malfunction Destruction Line noise strength (Level of malfunction) DC12V±5% Power interruption ±6 KV ±12 KV 1,000 V Remark When IT-3100 is not mounted on. While supplying power and transmitting data. 150 pF/330 ohm - Pulse frequency Burst cycle No.
4.2.6 AD-S10095A The following table explains electrical performance on the AC Adaptors (AD-S10095AE, AD-S10095AU). Table 4.17 Parameter ESD RS EFT Surge Specification Contact : ≥4KV Non-contact: ≥8KV Frequency: 80MHz to 1.0GHz Field strength : 3V/M 1.0 KV on input AC power ports Line to line : ±1KV (peak) Line to earth (ground) : ±2 KV (peak) Remarks 4.2.7 AD-S42120B The following table explains electrical performance on the AC Adaptors (AD-S42120BE, AD-S42120BE-CN). Table 4.
4.3 Mechanical Performance 4.3.1 IT-3100 The following table explains mechanical performance, vibration, and drop impact on the IT-3100 series (all models). Table 4.19 Parameter Resistance to vibration (in package) Specification 1.
4.3.3 HA-B61IO The following table explains mechanical performance, vibration, and drop impact on the Bridge Satellite Cradle (HA-B61IO, HA-B61IO-CN). Table 4.21 Parameter Resistance to vibration (in package) Specification 1.
4.3.5 DT-9723LIC The following table explains mechanical performance, vibration, and drop impact on the Battery Packs (DT-9723LIC, DT-9723LIC-CN). Table 4.23 Parameter Resistance to vibration Specification 1.5 G or less Impact durability (in height of fall) In bare condition 70 cm or less In individual carton box 70 cm or less In master carton box 70 cm or less Condition - 10 to 55 Hz - In X, Y, and Z directions - Reciprocally for 30 minutes One time for 6 faces onto P-tile surface.
4.3.7 AD-S42120B The following table explains mechanical performance, vibration, and drop impact on the AC Adaptor (AD-S42120BE, AD-S42120BE-CN). Table 4.25 Parameter Resistance to vibration Specification 0.5 G or less Impact durability (in height of fall) In bare condition 70 cm In individual carton box 70 cm or less In master carton box 70 cm or less Condition - 10 to 100 Hz - In X, Y, and Z directions - Reciprocally for 10 minutes One time for 6 faces onto P-tile surface.
4.3.9 HA-B90DCV The following table explains mechanical performance, vibration, and drop impact on the screen protect cover. Table 4.27 Parameter Resistance to vibration Specification 1.5 G or less (See note.) Impact durability (in height of fall) In bare condition 120 cm (See note.
4.3.11 HA-B80AX The following table explains mechanical performance, vibration, and drop impact on the RS-232C cross cable (HA-B80AX, HA-B80AX-CN). Table 4.
4.4 Reliability 4.4.1 IT-3100 The following table explains reliability of the main parts on the IT-3100 series (all models). Table 4.30 Parameter Backlight Specification 10,000 hours MTBF No. of times of installing and removing the paper holder to/from the terminal No. of times of opening and closing the paper outlet cover No.
No. of times of opening and closing the SD memory card cover No. of times of installing and removing a PC card to/from the PC card slot No. of times of opening and closing the PC card slot cover No. of times of installing and removing a device to/from the 14-pin serial connector on the terminal No. of times of opening and closing the 14-pin interface cover No. of times of opening and closing the 8-pin interface cover No. of times of reading data on magnetic card via the MCR No.
4.4.2 HA-B30CHG The following table explains reliability of the main parts on the Cradle-type Battery Charger (HA-B30CHG, HA-B30CHG-CN). Table 4.31 Parameter MTBF for electronics parts Mounting and removing IT-3100 to/from Cradle Switch Power switch DIP switch No. of ON/OFF USB times of the RS-232C connector RS-422 No. of connecting and removing the power jack Specification 50,000 hours 20,000 times Remark/Condition 5,000 times 10 times 500 times 500 times 100 times 1,500 times 4.4.
4.4.4 DT-9721CHGE The following table explains about reliability on the Battery Charger (DT-9721CHGE, DT-9721CHGE-CN). Table 4.33 Parameter MTBF for electronics parts Specification 300,000 hours Remark/Condition 4.4.5 DT-9723LIC The following table explains reliability on the Battery Packs (DT-9723LIC, DT-9723LIC-CN). Table 4.
4.5 Compliance 4.5.1 IT-3100 The following tables explain compliance with the relevant standards and directive requirements set mandatory by the respective countries and the region. Table 4.37 Category EMC Laser/ LED Radio Type Approval (Bluetooth) Bluetooth Logo Safety RoHS Standards and Requirement FCC part15B EN55022 EN55024 EN61000-3-2 EN61000-3-3 MIC GB9254 GB17625.1 CNS13438 AS/NZS CISPR22 FDA CFR21 EN60825 IEC60825 FCC part15C RSS-GEN RSS-210 EN300328 EN301489 MIC SRRC NCC Ver. 1.
4.5.2 HA-B30CHG The following table explains compliance with the relevant standards and requirements set mandatory on the Cradle-type Battery Charger (HA-B30CHG, HA-B30CHG-CN) by the respective countries and region. Table 4.38 Category EMC Safety RoHS Standards/Requirement FCC Part15B Class B EN55022 EN55024 GB9254 GB17625.1 UL1950 EN60950 GB4943 EU Directive 2002/95/EC Ministerial Decree No. 39 Remark Europe China 4.5.
4.5.4 DT-9721CHGE The following table explains compliance with the relevant standards and requirements set mandatory on the Battery Charger (DT-9721CHGE, DT-9721CHGE-CN) by the respective countries and region. Table 4.40 Category EMC Safety RoHS Standards/Requirement FCC Part15B Class B EN55022 EN55024 EN61000-3-2 EN61000-3-3 GB9254 GB17625.1 UL1310 CSA C22.2 No. 223 (cUL) EN60950 GB4943 EU Directive 2002/95/EC Ministerial Decree No. 39 Remark Europe China 4.5.
4.5.6 AD-S10095A The following table explains compliance with relevant standards set mandatory on the AC Adaptors (AD-S10095AE, AD-S10095AU). Table 4.42 Category Standards/Requirement EMC EN55022 CISPR22 EN60950 EU Directive 2002/95/EC Safety RoHS Remark Europe 4.5.7 AD-S42120B The following table explains compliance with the relevant standards and requirements set mandatory on the AC Adaptor (AD-S42120BE, AD-S42120BE-CN) by the country and region. Table 4.
4.5.8 HA-B34AT The following table explains compliance with relevant safety standards and requirement set mandatory on the battery charger car mount unit (HA-B34AT, HA-B34AT-CN) by the respective countries and region. Table 4.44 Category EMC Standards/Requirement ECE Regulation 10.
5. 5.1 Cable Specifications DT-888RSC For Chain Connection in Short Length (1 meter or less) View form side Maxmimum 1m View form top 123456 123456 Cable (See Table 5.1) Modular plug compatible with 6 / 6-6 FR SYK by Sanyo Industrial Co. Figure 5.1 Table 5.1 Specifications of the cable Cable Core wire Conductor Insulator Finish of external shape Insulator Finish of external shape Conductance resistance Insulation resistance Sheath Characteristics 20/0.1A Semi-hard material P.V.C. 20/0.1A P.V.C.
For Chain Connection in Long Length (1 meter or longer) For a cable with its length longer than one meter, no dedicated cable from CASIO is available. Arrange one locally available that can meet the specifications described below. View form side Maxmimum 1,000 m View form top 123456 123456 Cable compatible with SK-UTP 100M3P by Sanyo Industrial Co. Modular plug compatible with 6 / 6-6 FR SYK 50 by Sanyo Industrial Co. Figure 5.3 Wiring (pin-to-pin straight/twist-pair connection) Pin no.
5.2 DT-887AXA The dedicated RS-232C cross cable (DT-887AXA, DT-887AXA-CN) is available for connecting the terminal to a PC via the 9-pin serial interface on the HA-B61IO (Bridge Satellite Cradle). See the specifications below. Length; 1.5 m Wiring Cradle side Pin no. Signal Pin no. Signal 1 CD 1 CD 2 RD 2 RD 3 SD 3 SD 4 ER 4 ER 5 SG 5 SG 6 DR 6 DR 7 RS 7 RS 8 CS 8 CS 9 CI 9 CI Figure 5.
5.3 HA-B80AX The dedicated RS-232C cross cable (HA-B80AX, HA-B80AX-CN) is available for directly connecting the terminal to a PC via the 8-pin serial interface on the terminal. See the specifications below. Length; 1.5 m Wiring Pin no. Signal Pin no. Signal 1 SD 1 CD 2 RD 2 RD 3 RS 3 SD 4 CS 4 ER 5 Vcc 5 GND 6 GND 6 DR 7 ER 7 RS 8 DR 8 CS 9 CI Figure 5.
6. 6.1 Precautions Handling Precautions Precautions for short-term storage (1 to 2 days) • If the IT-3100 remains unused for a long period including Saturday and Sunday, before starting holiday replace the battery pack if installed in the terminal with a fully charged battery pack. This will conserve the built-in memory backup battery and ensure retention of data on the terminal. • If there is a possibility of the above or operator error (e.g.
• Do not attempt to solder anything directly on the battery pack surface. The insulation may be damaged or the gas exhaust valve or safety mechanism may be damaged, causing the battery pack to become hot, smoke, explode, or ignite. • Do not use the battery pack in other device than the terminal. The performance or service life of the battery pack may be reduced or abnormal current may flow to cause it to become hot, smoke, explode, or ignite.
