User Manual

E-37
IT-2000’s Specifications
CPU: 32 bit CPU
RAM: IT-2000D33E: RAM 4 MB + Flash ROM 8 MB
IT-2000D53E: RAM 4 MB + Flash ROM 16 MB
Display: VGA interface,
16 grayscale (only 4 grayscale visible) monochrome, 384 (V)
x 192 (H) dots
Display contrast adjusting: auto modifying
EL backlight (auto-off function, 20 - 300 sec. in 20-second units), auto ON/OFF
Input: Touch key/touch panel method
16 stroke keys (including the power key)
Infrared: Interface: Conformed IrDA1.0 or IrDA1.1 Standard
Synchronization: Asynchronous (IrDA1.0)
Frame synchronization (IrDA1.1)
Transfer rate: Conformed IrDA Ver. 1.0: ~ 115.2 Kbps
Conformed IrDA Ver. 1.1: ~ 4 Mbps
Serial communication:
Interface: RS-232C level interface
Synchronous mode: Asynchronous
Transfer rate: 1,200 bps - 115.2 Kbps
14-pin serial communication:
Interface: RS-232C level interface
Synchronous mode: Asynchronous
Transfer rate: 1,200 bps - 115.2 Kbps
Other: Clock functions: second, minute, hour, day of the week, day, month, year
Full auto-calendar
Buzzer sound: 3-level volume + OFF possible (depending on the software)
Power supply: Main power source: Lithium ion battery pack
Memory back-up battery:
Lithium batteries CR2032 (#1) and IVR2430 (#2)
Battery life: Lithium ion battery pack: 8 hours (stand-by)
Memory back-up battery: 1 week
Battery checker: Both for the main power battery and for the
back-up battery (CR2032)
Auto power-off function (1 - 15 minutes, setting in minutes of one)
Operating temperature:
–5°C - 50°C (23°F - 122°F)
Dimensions (Approximate):
85<100> (W) x 225 (L) x 29<34.4> (H) mm (3 11/32 x 7 11/16 x 1 3/16 inch)
Figures in <> brackets indicate dimensions with printer attached.
Weight (Approximate):
540 g