IT-10 Series Hardware Manual (Version 1.00) CASIO Computer Co., Ltd. Copyright ©2005. All rights reserved.
Table of Contents Chapter 1 1.1 1.2 1.2.1 1.3 1.3.1 1.3.2 1.3.3 1.3.4 1.3.5 Chapter 2 2.1 2.2 2.3 2.4 2.5 2.6 Chapter 3 Chapter 4 4.1 4.1.1 4.1.2 4.1.3 4.1.4 4.1.5 4.2 4.2.1 4.2.2 4.2.3 4.2.4 4.3 4.3.1 4.3.2 4.3.3 4.3.4 4.4 4.4.1 4.4.2 4.4.3 4.5 4.5.1 4.5.2 4.5.3 4.5.4 Chapter 5 5.1 5.2 Chapter 6 6.1 6.2 6.2.1 6.2.
CASIO is a registered trademark of CASIO Computer Co., Ltd. in Japan. Other product names or company names in this reference manual are either trademarks or registered trademarks of their respective owners. No part of this document may be produced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of CASIO Computer Co., Ltd. in Tokyo Japan. Information in this document is subject to change without advance notice. CASIO Computer Co.
Editorial Record Manual Version no. 1.
Preface The IT-10 is a new rugged PDA designed and built to be used for vertical applications (business specific applications) in severe business environment. The terminal is water-splash proof, dust proof and can withstand the inevitable rough handling that any vertical market device will suffer. This reference manual will explain you in detail about the specifications of hardware, reliability, environment, compliance and etc.
1. Product Overview 1.1 Features Hardware and software features at a glance • Uses Windows Mobile 2003 Second Edition Software for Pocket PC as the operating system. • Withstand a drop from 1 meter, and IP54 level for dust and water-splash resistance (compliant with IEC60529 standard). • Large 3.
1.2 Available Models And Options Table 1.1 Available models Model RAM IT-10M20 64 MB IT-10M30BR 128 MB Table 1.2 Options Option Cradle Battery Battery Charger AC adaptor Screen Protect Sheet Communication Card Cover Cable IEEE802.11b No Yes Bluetooth No Yes Product Bridge Satellite Cradle Basic Cradle Battery Pack Dual Battery Charger Model no.
1.2.1 Options And Interfaces IrDA Product (Recommended option）* IT-10 Bridge Satellite Cradle HA-C61IO IrDA Port (IrDA 1.3) USB RS-232C PC RS-422 Power Supply Terminals （Built-in Charger） AC Adaptor AD-S42120AE SD card (Recommended option）＊ SD Card Slot CF Card (Recommended option）＊ CF Card Slot Bridge satellite Cradle HA-C61IO AC Adaptor AD-S42120AE Comm.
1.3 General Guide 1.3.1 IT-10 External Views 9 11 10 12 13 2 14 1 3 4 5 7 6 8 16 18 17 6 15 19 22 Fig. 1.3 Refer to Table 1.4 for names of each part and its description. 20 21 Fig. 1.
Table 1.4 Names of parts No.
1.3.2 HA-C60IO (Basic Cradle) Views 2 1 Fig. 1.3 5 4 3 Fig. 1.4 Table 1.5 Names of parts No. Part Name 1 Serial connector 2 3 4 Alignment pegs Power adaptor port RS-232C port 5 USB port Description This connector mates with the serial connector on the bottom of the terminal. The power is also supplied to the terminal via this connector. Align the terminal with these two pegs when mounting it to the Basic Cradle. Connect the dedicated AC adaptor (AD-S15050AE) here.
1.3.3 HA-C61IO (Bridge Satellite Cradle) Views 2 4 1 3 5 Fig. 1.5 8 6 9 7 Fig. 1.6 10 Fig. 1.7 Refer to Table 1.6 for names of each part and its description.
Table 1.6 Names of parts No. Part Name 1 IrDA communication port 2 Detection switch 3 Status lamp 4 5 6 7 Power terminals Power switch Power adaptor port RS-422 ports 8 9 10 RS-232C port USB port DIP switches Description Align this port with the IrDA communication port of the terminal for data transfer via the IrDA interface. This switch detects when the terminal is correctly mounted on the Bridge Satellite Cradle. “POWER” Indicates the power status. Off : Power is off.
1.3.4 HA-C32DCHG (Dual Battery Charger) View 2 1 3 4 Fig. 1.8 Table 1.7 Names of parts No. Part Name 1 Charging status indicator lamp 2 3 4 Power terminals Power adaptor port Series connection terminal Description Indicates the battery charge status. Green : Charging is complete. Red : Charging continues. Flashing red : Problem in the charge operation. Flashing green : Idle mode waiting for a next charge Off : No battery pack is mounted.
1.3.5 HA-C21BAT (Battery Pack) View Fig. 1.
2. Hardware Specifications 2.1 IT-10 Table 2.1 Item CPU, Memory CPU Operating system RAM FROM Display Display device No. of dots Dot pitch Scale Display fonts Backlight Visible angle Indicator Confirmation /Status Input Keyboard Switch Specification Remark Intel PXA270 Processor (run at 416 MHz) Microsoft® Windows® Mobile 2003 Second Edition Software for Pocket PC 64 MB (M20) 128 MB (M30BR) 64 MB (user area: approx. 20 MB) 3.7-inch transflective TFT color LCD 480 (w) x 640 (h) 0.117 mm (w) x 0.
Serial interface RS-232C Synchronization Baud rate External output level USB Host USB Client Standard Baud rate External output power Standard Baud rate Connector Pin layout Signal layout SD card slot Supported cards CF card slot Specification Available power DC input Input voltage Consumption current Plug AC adaptor Power terminals Power terminals Start/stop, frame synchronization 300, 600, 1200, 2400, 4800, 9600, 19.2K, 38.4K, 57.6K, 115.
Battery pack charge time Approx. 5 hours or less Memory backup battery charge time Approx. 4 hours (when the power is provided via the dedicated AC adaptor or the Cradle.) Approx. 16 hours (when the power on the terminal is kept on.) Conditions; - The surrounding temperature is at room temperature. - The dedicated AC adaptor or Cradle is used to charge the battery pack. Conditions; - The battery pack (HA-C21BAT) is installed in the terminal. - The surrounding temperature is at room temperature.
Pin layout for Serial Interface; 1 2 ・ ・ ・ 24 25 26 3 ・ ・ ・ Fig. 2.1 Signal layout; Table 2.2 Direction of Pin Signal Use Remark signal flow no. 1 CR CD2# #2 for detecting the Cradle IN 2 RS232C CTS RS232C IN 3 RS232C DCD RS232C IN 4 RS232C DTR RS232C OUT 5 RS232C RTS RS232C OUT 6 RS232C DSR RS232C IN 7 GND GND See note.
Table 2.3 Operating hours by model IEEE802.11b and Model Bluetooth integrated IT-10M20 Operating hour No Approx. 27 hours IT-10M30BR Yes IT-10M30BR Yes Approx. 14 hours Operating condition and mode - The surrounding temperature is at room temperature. - The battery pack (HA-C21BAT) is a brand new and fully charged. - The backlight is turned off. - The IrDA setting is set to off. - The CPU speed setting is set to “Auto Mode”.
2.2 HA-C60IO/HA-C61IO Table. 2.4 Item USB 11 1 22 2 4 4 3 Connector 1. VBus 2. –Data (D-) 3. +Data (D+) 4. GND USB connector type B Full duplex Start/stop method 115.2 Kbps Comm. method Synchronization Comm. speed SG ER SD RD CD RS-232C 4 3 2 1 9 8 7 6 CI CS RS D 5 D-Sub 9-pin (Female) Full duplex Start/stop method 115.2 Kbps IN OUT No. of LEDs No. of display colors Status LED Display content DIP switch Input Detection switch for IT-10 Continue.
DC 12V±5% Input voltage DC 5V±5% DC12V Approx. 3.5A Consumption current DC5V Approx. 3.0A Input from AC adaptor EIAJ RC-5320A Class 4 (Center pin: plus) manufactured by Hoshiden Corp. EIAJ RC-5320A Class 2 (Center pin: plus) manufactured by Hoshiden Corp. AD-S15050AE Plug Power AC adaptor (Dedicated) Output voltage DC 5V±10% 2,200 mA (maximum) Output current 1,500 mA (maximum) Constant voltage Charge method Charge/supply power AD-S42120AE Approx. 5.
2.3 DIP Switch Setting (For HA-C61IO) The DIP switch is located on the rear side of the Bridge Satellite Cradle (HA-C61IO). Change the ON/OFF settings according to your required system configuration. The new settings do not go into effect until the power switch is turned off and then back on again.
2.4 Status Indications With LEDs This chapter is not applicable to the HA-C60IO Basic Cradle. Various operational statuses on the HA-C61IO can be displayed using the LEDs. The following table describes LED indication modes and their meanings. Table 2.5 Item LED Power status indicator (“POWER”) LED mode Off Green Red Comm. status indicator (“DATA”) Off Green (Flashing) Red (Flashing) Line status indicator (“LINE”) Off Green (Flashing) Description : Power off.
2.5 HA-C32DCHG Table 2.6 Item Charge method Charge method Specification Consumption current Constant-voltage and constant-current Approx. 2 hours (with one battery pack mounted) Approx. 4 hours (with two battery packs mounted) Supplied via dedicated AC adaptor (AD-S42120AE) Approx. 0.8 A Approx. 2.4 A Operating temperature Operating humidity Max. no.
2.6 HA-C21BAT Table 2.8 Item Rated capacity Rated voltage Charge period Specification 2,300 mAH 3.7V Approx. 2.0 hours Approx. 4.0 hours Operating temperature Operating humidity Weight Dimensions Refer to the temperature for HA-C32DCHG in Table 4.4 when charge. Refer to the temperature for IT-10 in Table 4.1 when discharge. Refer to the temperature for HA-C32DCHG in Table 4.4 when charge. Refer to the temperature for IT-10 in Table 4.1 when discharge. Approx. 60 g 72.8 (W) x 58.0 (D) x 8.
3. Product Identification And Reference Numbers On the back of the terminal and its options (major options only), there is a bar code and numbers printed on label as shown in Fig. 3.1 below. This bar code is represented by 15 digits of Code128 and by alphanumeric characters beneath the bar code. The numbers from 1 to 9 in the figure represent identification and references of the terminal. The numbers from 10 to 14 represent a manufacturing reference which is reserved by the manufacturer.
4. Quality References This chapter describes about quality references specially concerned with environmental performance, electric durability, mechanical durability, reliability, compliance and, etc. for the IT-10 series and its dedicated options. 4.1 Environmental Performances 4.1.1 IT-10 Table 4.
4.1.2 HA-C60IO Table 4.2 Item Specification Condition Temperature Operation Storage 0 to 40℃ -20 to 60℃ Humidity Operation Storage Storage in carton box Temperature Humidity Dust and water-splash proof No condensation 10 to 85%RH 10 to 90%RH -20 to 60℃ 10 to 90%RH No condensation Not applicable. 4.1.3 HA-C61IO Table 4.
4.1.4 HA-C32DCHG Table 4.4 Item Specification Condition Temperature Operation Non-operation Storage 0 to 40℃ -20 to 60℃ -20 to 60℃ When battery pack is not charged. In carton box Operation Storage 10 to 85 %RH 10 to 90 %RH No condensation No condensation In carton box Humidity 4.1.5 HA-C21BAT Table 4.5 Item Specification Condition Temperature Operation Non-operation Storage Refer to the temperature for HA-C32DCHG in Table 4.4 when charge. Refer to the temperature for IT-10 in Table 4.
4.2 Electrical Durability 4.2.1 IT-10 Table 4.6 Item Power consumption Anti-static strength Malfunction Destruction Specification 5V, 2.7A 5V, 3.0A ±4 KV (contact), ±8 KV (in air) ±12 KV Remark Applicable to IT-10M20. Applicable to IT-10M30BR. Compatible with EN6100-4-2 4.2.2 HA-C60IO/HA-C61IO Table 4.7 Item Consumption current Specification Approx. 1.
4.2.4 HA-C21BAT Table 4.
4.3 Physical Durability 4.3.1 IT-10 Table 4.10 Item Specification Resistance to drop impact (height) In bare condition 100 cm Condition Onto concrete, one time on each of the 6 sides and 4 corners. (no CF card fitted) Onto concrete, one time on each of the 6 sides, 1 corner, 3 edges. 10 to 55 Hz In X,Y, and Z directions Reciprocally for 30 minutes While the power is kept on (with the screen being turned on).
4.3.4 HA-C21BAT Table 4.13 Item Resistance to vibration Specification 2.0 G or less Condition 10 to 55 Hz In X,Y, and Z directions Reciprocally for 30 minutes Resistance to impact In bare condition In individual carton box In master carton box 100 cm 70 cm or less 70 cm or less 6 faces, 4 edges onto P-tile. 6 faces, 3 edges, 1 corner onto concrete floor.
4.4 Reliability 4.4.1 IT-10 Table 4.
4.4.2 HA-C60IO/HA-C61IO Table 4.15 Item MTBF (electronics parts) Mounting/removing the terminal to/from Basic Cradle Mounting/removing the terminal to/from Bridge Satellite Cradle Power switch Switch DIP switch USB No. of installing/removing the RS-232C connector RS-422 No.
4.5 Compliance 4.5.1 IT-10 Table 4.17 Model IT-10M20 IT-10M30BR EN55022, EN61000, EN55024 (EMI, EMS) Yes No EN301.489-17 (EMI,EMS) European Standards EN60950 (Safety) No Yes Yes Yes EN300.328-2 (Bluetooth, WLAN) No Yes Table 4.18 Model IT-10M20 IT-10M30BR FCC Part 15B Class B Yes Yes USA Standards UL60950-1 Yes Yes FCC Part 15 sub part C + SAR No Yes Note: Consult CASIO Computer Co., Ltd. for other areas. 4.5.2 HA-C60IO/HA-C61IO Table 4.
5. Cable Specifications 5.1 For Chain Connection And Short Length Length; 1 meter or less M a x m im u m 1m View from side View from top 1 2 3 4 5 6 1 2 3 4 5 6 M odular plug (c omppat ible with 6/ 66F R S Y K (S aby o Indus trial) C a b le ( s e e T a b le 5 .1 ) Fig. 5.1 Table 5.1 Specifications of the cable Cable Core wire Conductor Insulator Finish of external shape Insulator Finish of external shape Conductance resistance Insulation resistance Sheath Characteristics 20/0.
5.2 For Chain Connection And Long Length Length; 1 meter or longer Max. 1,000m View from side View from top 123456 123456 Modular plug compatible with 6/6-6 FR SYK50 by Sanyo Industrial Co. Cable compatible with SK-UTP 100M3P by Sanyo Industrial Co. Fig. 5.3 Pin layout diagram of cable for chain connection and long distance (pin-to-pin straight/twist-pair connection) Wiring Cradle at lower position under the chain connection Pin no.
6. Precautions 6.1 Handling Precautions Precautions for short-term storage (1 to 2 days) • • If the IT-10 is to be stored over holidays (including Saturday and Sunday), replace the battery pack with brand-new one before starting the holiday. This will conserve the built-in memory backup battery and ensure retention of data on the terminal. If there is a possibility of the above or operator error (e.g.
6.2 Safety 6.2.1 Battery Pack • • • • • • • • • • • • • • Never disassemble or retrofit the battery pack. The battery pack has safety mechanism and protection means incorporated to avoid hazards. Should it be damaged, the battery pack could become hot, generate smoke, explode, or ignite. Never contact the “+” and “-“ terminals with metal objects such as a wire. Also, do not carry or store the battery with a metal necklace or hair pin.
6.2.2 General • • • • • • • • Be aware of abnormal conditions. If the IT-10 is continuously used in an abnormal condition, a fire or electric shock may occur. If there is an abnormality, immediately turn off the Power switch, and be sure to remove the batteries and then contact a CASIO distributor for repair. Supply Current/Voltage Do not use an AC adaptor with AC voltage not rated on the AC adaptor.
• • • • • About the battery 1. Do not attempt to disassemble or solder the battery. Also, do not heat or throw the battery into a fire. 2. When the button-type battery (memory backup battery) used in this terminal is removed, exercise care so as not to accidentally swallow it. Remain aware of the danger to infants. Store the button-type battery in an infant-safe location. Should the battery be swallowed, immediately consult a doctor. 3.
