User's Manual

Getting Started with Your Phone

6. Lightly press and hold the microSD card cover

1, then lock it by sliding it in the direction

of the arrow 2 shown in the right figure.

7. Install the battery and replace the battery cover, making sure to

slide the Battery Cover Lock to the LOCK position.

For instructions on how to install the battery and the battery •

cover, refer to steps 3 through 6 of “Installing and removing the

battery” on page 13.

Installing the microSD card cover

If the microSD card cover comes off, install it using the following

procedure:

1. Make sure that rod for the microSD card cover is not deformed

before installation.

2. Hold the microSD card cover

vertically and insert one end of the

cover rod into position 1 as shown

in the right figure.

3. Insert another end of the rod into

the position as shown in the right

figure.