User Manual

EN-44
Configuring Digital Piano Settings
General >Ent Other Digital Piano parameters
LCD Contrast Digital Piano display contrast (See the page
to the right.)
Adjusting Display Contrast
(page EN-7)
Auto Resume Digital Piano setup backup. When this setting is
enabled, the Digital Piano remembers its current
settings when it is turned off, and restores them the
next time power is turned on.
• The settings below are not remembered.
Song part (LR) selection, Operation lock, Local
Control, Concert Play song mode (LISTEN, PLAY),
Concert Play song tempo
Off
(Disabled),
On
(Enabled)
–
Auto Power Off Auto Power Off (See the page
to the right.)
Auto Power Off (page EN-6)
Operation Lock Operation lock. Enable this setting when you want to
protect against unintentional button operations.
When this setting is turned on, the Digital Piano’s
buttons (except for the P (Power) button and
buttons required for unlock) are locked, so no
operation can be performed.
Off
(Disabled),
On
(Enabled)
–
Half Pedal Pos. Half pedal position (See the page
to the right.)
To adjust the half pedal
trigger position (page EN-12)
Headphone Mode Headphone mode. The Headphone Mode
automatically performs timbre compensation while
headphones are being used to reproduce the natural
expanse of sound that reaches the ears when an
acoustic piano is played. The initial default setting is
“On”.
• On: Enabled; Off: Disabled
Off
(Disabled),
On
(Enabled)
–
Volume Sync EQ Volume sync equalizer. Automatically performs
timbre compensation in accordance with the volume
level. This feature ensures that low range and/or
high range sounds are easier to hear, even at low
volume levels. The initial default setting is “Normal”.
• Off: Compensation disabled;
Weak: Weak compensation;
Normal: Normal compensation;
Strong: Strong compensation
• This function is intended for use with sound
output by the Digital Piano’s speakers.
• Compensation is not performed while anything is
plugged into the Digital Piano’s LINE OUT R or L/
MONO terminal (page EN-64 “Connecting Audio
Equipment or an Amplifier”).
Off
(Disabled),
Weak,
Normal,
Strong
–
Factory Reset >Ent Return system to initial factory defaults. – Returning the Digital Piano to
Its Factory Default Settings
(page EN-7)
Display Text Description Settings
Go here for more
information
GP300-ES-1B.indd 46 2016/06/24 10:43:22