User Manual

20060601
1-6
Geometry Mode Overview
S To open an existing fileTo open an existing file
1. Perform the following operation: (File) – 2:Open.
• This displays a menu of existing files. This displays a menu of existing files.
2. Use A and D to move the highlighting to the file you want to open and then press U.
• The following dialog box will appear if you have a drawing on the screen. The following dialog box will appear if you have a drawing on the screen.
3. To clear the current drawing, press (Yes).
• This will open the file you selected in step 2. This will open the file you selected in step 2.
S To delete a fileTo delete a file
1. Perform the following operation: (File) – 2:Open.
• This displays a menu of existing files. This displays a menu of existing files.
2. Use A and D to move the highlighting to the file you want to delete and then press
(DEL).
• This causes a confirmation dialog box to appear. This causes a confirmation dialog box to appear.
3. Press (Yes) to delete the selected file or (No) to cancel the delete operation.
4. To exit the file menu, press ).