User Manual

20060601
6-6
Working with Animations
When you want to do
this:
Perform this procedure:
Delete the animation
assigned to point E
1. Use A and D to move the highlighting on the Edit
Animations screen to “E”, which is located under
“Animations”.
2. Press (DEL).
• This deletes the animation assigned to point E and This deletes the animation assigned to point E andThis deletes the animation assigned to point E and
causes “E” (along with the “t0” and “t1” values under it) to
disappear from under “Animations” screen.
Note
Selecting “Animations” in step 1 and then pressing (DEL)
will delete the animations assigned to all points.
Turn off trace for point D
1. Use A and D to move the highlighting on the Edit
Animations screen to “D” under “Traces”.
2. Press (DEL).
• This turns off trace for point D and causes “D” to This turns off trace for point D and causes “D” toThis turns off trace for point D and causes “D” to
disappear from under “Traces”.
Note
Selecting “Traces” in step 1 and then pressing (DEL) will
turn off trace for all points.
3. After all the settings are the way you want, press ).
• This will close the Edit Animations screen. This will close the Edit Animations screen.