User Manual

18
Quick Start Basics
. Operation Lamp Indications
While power is off
While power is on
IMPORTANT!
• The first time you connect the controller to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
• A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take longer than normal. These
conditions may also cause the operation lamp to flash red. If this happens, refer to
page 84.
• Charging is not performed while the connected computer is in the hibernate mode.
Operation Lamp Status Meaning
Lit red Charging
Flashing red
Charging stopped due to abnormal internal
temperature, USB-AC adaptor problem, battery
problem (page 84), timer operation.
Unlit Charging complete
Operation Lamp Status Meaning
Lit amber Charging
Slow red-amber flashing Charging (sleep state)
High-speed green-amber
flashing
Charging stopped due to abnormal internal
temperature, USB-AC adaptor problem, battery
problem (page 84), timer operation.
High-speed red-green flashing Same as above (sleep state)
Lit green Charging complete
Slow green flashing Charging complete (sleep state)