User Manual

17
Quick Start Basics
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector
as shown in the illustration.
Charging time: Approximately 2 hours 55 minutes
While the controller is turned off, connect in the sequence shown below (

,

).
• If the controller is on, hold down [p] (Power) for about two seconds to turn it off
before connecting to the computer.
To charge using a USB connection to a computer
USB


Micro USB cable
(included with controller)
[USB] port
USB port
Computer
(power turned on)
Plug in the cable so the u mark on the small (micro USB) connector is facing towards
the LCD.
[USB] cover