User Manual

10
Operating the Camera with the Remote Controller
. Shooting with Dramatic Slow Motion
Press [0] to start movie recording. At the point where you want to switch to slow
motion recording, press the [r/SLOW] button. Normal speed recording will resume
after a fixed period of slow motion recording. Press [0] again to stop recording.
NOTE
• You can specify the slow motion recording start point and duration using the G’z
EYE app or the optional controller with LCD.
The operation lamp shows the current remote controller and camera status.
The remote controller will vibrate in the cases described below.
• When you turn it on
• When you turn it off
• When a remote controller triggered image recording operation fails
• When there is an error
NOTE
• Vibration alert is not performed while battery power is low.
Operation Lamp
Remote controller is being registered on
the camera.
Flashing amber (slow)
Power is on, but there is no camera
connection.
Flashing green (fast)
Remote controller has been connected
with the camera.
Flashing green (slow)
Movie recording is in progress. Flashing red (slow)
Snapshot shooting Lit red
Recording mode is Dramatic Slow Motion. Flashing amber (slow)
Dramatic Slow Motion shooting is in
progress.
Lit amber
Power was just turned off. Flashing green (fast)
An error occurred. Flashing red (fast)
Vibration Alert