EN REMOTE CONTROLLER User’s Guide Thank you for purchasing this CASIO product. • Before using it, be sure to read the precautions contained in this User’s Guide. • Keep the User’s Guide in a safe place for future reference. • For the most up-to-date information about this product, visit the official Website at http://dc.casio.
Accessories As you unpack this product, check to make sure that all accessories shown below are included. If anything is missing, contact your original retailer.
Read this first! • The contents of this manual are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. • Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD.
Contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting with a Separately Available Camera. . . . . . . . . . . . . . . . . . . . . . . . General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Start Basics 2 3 3 5 6 Battery Loading Procedure .
General Guide The numbers in parentheses indicate the pages where each item is explained.
Quick Start Basics Battery Loading Procedure 1. Insert a coin into the slot of the battery cover on the back of the remote controller, and rotate to the left to remove the cover. 2. Load a battery so its positive side is facing upwards, so you can see it. 3. Aligning the battery cover mark with [OPEN], rotate it to the right until the mark reaches the [LOCK] position.
Attaching the Remote Controller to the Belt Pass the belt through the belt attachment slots of the remote controller. . Belt Precautions • The belt is intended for use with this product only. Do not use it for any other purpose. • Should you notice any itching, rash, or other skin abnormality in the vicinity of the belt, immediately stop using it. • Keep the belt away from and do not leave it in areas where it may be exposed to heat. Heat can cause deterioration of the belt material.
Turning Power On or Off . To turn on power Hold down the [p] button until the operation lamp lights. The operation lamp will light in a color that indicates the current battery level, and then change to flashing green. Turning on the camera will cause it to connect with the remote controller, and the operation lamp will slowly flash green. . To turn off power Hold down the [p] button until the operation lamp goes off.
Operating the Camera with the Remote Controller The operations below can be performed on a remote controller that is connected with a camera. NOTE • The remote controller’s operation lamp will slowly flash green while it is connected with a camera. The operation lamp will flash faster if there is no connection with the camera.
. Shooting with Dramatic Slow Motion Press [0] to start movie recording. At the point where you want to switch to slow motion recording, press the [r/SLOW] button. Normal speed recording will resume after a fixed period of slow motion recording. Press [0] again to stop recording. NOTE • You can specify the slow motion recording start point and duration using the G’z EYE app or the optional controller with LCD. Operation Lamp The operation lamp shows the current remote controller and camera status.
Appendix Safety Precautions *DANGER This symbol indicates information that, if ignored or applied incorrectly, creates the danger of death or serious personal injury. *WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.
*WARNING . Smoke, abnormal odor, overheating, and other abnormalities + • Continued use of this product while it is emitting smoke or strange odor, overheating, or exhibiting any other abnormality creates the risk of fire and electric shock. Immediately perform the steps below whenever any of the above symptoms are present. • Turn off power. If power does not turn off, contact your retailer or nearest CASIO authorized service center. . Keep Away From Fire • Do not throw the product into fire.
*WARNING - • Do not use this product in the vicinity of high-precision electronic equipment or any electronic equipment that handles weak signals. Doing so can interfere with proper operation of such digital devices and create the risk of accident. • Keep this product away from the chest area of any individual fitted with a cardiac pacemaker or similar medical device. Magnetism emitted by the product may affect cardiac pacemakers and other medical devices.
*CAUTION . Battery Precautions • Carefully note and follow the precautions below. Failure to do so can cause battery rupturing, creating the risk of fire, personal injury, and soiling of nearby objects by leaking fluid. – Do not try to take a battery apart and do not allow a battery to become shorted. – Do not try to charge the battery. – Do not expose batteries to heat or fire. – Use only batteries of the specified type. – Load a battery with its poles (plus and minus) facing correctly.
Shock resistant, Splashproof, Dustproof This product is designed to be shock resistant, splashproof, and dustproof as described below. 0 Shock resistant: Passes testing based on CASIO independent standards*1 formulated according to MIL-Standard 810G Method 516.7-Shock.*2 *1 Drop testing from a height of 4.0 meters (13.
• Do not leave the product for long periods in a location subjected to very low temperatures (where water freezes) or very high temperatures. In particular, avoid leaving the product in areas exposed to strong direct sunlight, in a motor vehicle on a hot day, etc. Any of these conditions can result in a deterioration of splashproofing. . Precautions after Use Near Water • Before opening the battery cover, use a clean, dry, soft cloth to wipe all moisture and dirt from the product.
. Precautions after Use • Do not leave the product for long periods in a location subjected to very low temperatures (where water freezes) or very high temperatures. In particular, avoid leaving the product in areas exposed to strong direct sunlight, in a motor vehicle on a hot day, etc. Doing so can cause loss of splashproofing. • Never use chemical agents for the purpose of cleaning, rust proofing, moisture proofing, etc. Doing so can cause loss of splashproofing.
Precautions During Use . Communication Environment This product can be connected with the camera using Bluetooth wireless technology. This product may not connect with the camera if it is enclosed within your hand or by a cover. . Operating Environment • Operating Temperature: –10 to 40°C (14 to 104°F) • Operating Humidity: 10 to 85% (Non condensation) • Do not leave the product in any of the locations below.
Radio transmission interception The radio waves that are used to send and receive data can be intercepted by third parties. Unauthorized access CASIO COMPUTER CO., LTD. shall be held in no way liable for any unauthorized access and/or use of the access point equipped on this product if the product is ever lost or stolen. Use as a wireless device Use the wireless function of this product only as specifically described in this manual. Any other use is unintended use, and CASIO COMPUTER CO., LTD.
. Copyrights The following terms, which are used in this manual, are registered trademarks or trademarks of their respective owners. Note that trademark ™ and registered trademark ® are not used within the text of this manual. • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by CASIO COMPUTER CO., LTD. is under license. Other trademarks and trade names are those of their respective owners.
. Open Source Software This product includes software that is licensed under the license conditions below. CMSIS Copyright (c) 2011 - 2015 ARM LIMITED All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Main Specifications Communication Bluetooth • Communication Standard: Bluetooth® 4.1 Power Requirements Lithium battery (CR2032) x 1 Approximate Battery Life*1 Operation Time: Approximately 2 months *1 According to CASIO standards • Battery life is not guaranteed under actual operating conditions. • Frequency of use, configured settings, and ambient temperature in the area where the product is used all greatly affect operating time. Power Consumption 3V DC; Approximately 0.04W Dimensions 40.
Declaration of Conformity According to EU Directive Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan Responsible within the European Union: Casio Europe GmbH Casio-Platz 1, 22848 Norderstedt, Germany www.casio-europe.com To comply with the relevant European RF exposure compliance requirements, this GEC-1 must not be co-located or operating in conjunction with other transmitter. Note: This equipment is intended to be used in all EU and EFTA countries.
* CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. – Do not ingest, Chemical Burn Hazard – This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. – Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
CASIO COMPUTER CO., LTD.
