Operation Guide

●
Connecting with a Phone
In the Timekeeping Mode, hold down (D) for
at least two seconds. Release the button when
e
starts to flash, which indicates that the watch
is connected with the phone.
●
To terminate a connection between a phone
and the watch, press any watch button
besides (B).
D
After connectionBefore connection
Any button besides (B)
Connecting with a Phone
To connect the watch with a phone, first install
the CASIO “G-SHOCK Connected” app on the
phone and then use Bluetooth to pair the
watch with the phone.
●
A
Install the app on your phone.
In Google Play or the App Store, search for the
CASIO “G-SHOCK Connected” app and
install it on your phone.
●
B
Configure Bluetooth settings.
Enable the phone’s Bluetooth.
Note
●
For details about setting procedures,
see your phone documentation.
●
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Enter the Timekeeping Mode.
l
Navigating Between Modes
2.
Move the phone to be paired with close to
(within one meter of) the watch.
3.
On the phone’s Home Screen, tap the “G-
SHOCK Connected” icon.
4.
Follow the instructions on the phone’s
screen to pair with the watch.
●
If a pairing prompt message appears,
perform the operation shown on the
phone screen.
●
If pairing fails for some reason, perform
the procedure again from step 1.
Pairing complete.Pairing started.
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch’s other settings.
Important!
●
The watch cannot connect with a
phone while a stopwatch
measurement or timer countdown
operation is in progress.
Note
●
This function is available only while G-
SHOCK Connected is running on the
phone.
●
This section describes watch and
phone operations.
X
: Watch operation
Y
: Phone operation
Getting Ready
Enter the Timekeeping Mode.
l
Navigating Between Modes
Operation Guide 3464
3