User guide

114
02
01
02
04
115
05
03
• Calibrate the electronic compass with the handset open before using it with the
handset open.
• To calibrate the electronic compass with the flip open, wave the phone in a
horizontal figure 8 pattern for 15 seconds.
HOW TO USE
You can view the short instruction by selecting the How to use .
BLUETOOTH
Bluetooth technology enables wireless connections between electronic devices. If
connected with a Bluetooth Handsfree device, you can use your phone more freely.
Since devices with Bluetooth connectivity communicate using radio waves, your phone
and the other device do not need to be in direct line-of-sight. The two devices only
need to be within 10 meters (30 feet) of each other. The connection can be subject to
interference from obstructions such as walls or other electronic devices. This device is
compliant with Bluetooth Specification 3.0, supporting the following profiles: Headset,
Handsfree, Dial Up Networking, Stereo, Phonebook Access, Basic Printing, Basic
Imaging, and Object Push for vCard and vCalendar. To ensure interoperability between
other devices supporting Bluetooth technology, use approved enhancements for this
model. Check with the manufacturers of other devices to determine their compatibility
with this phone. There may be restrictions on using Bluetooth technology in some
locations. Check with your local authorities or Verizon Wireless. If you want more
information on this function, visit the Bluetooth Technology organization Web site:
https://www.bluetooth.org/apps/content .
Features using Bluetooth technology or allowing such features to run in the
background while using other features, increase the demand on battery power and
reduce the battery life.
BLUETOOTH ON/OFF
To activate Bluetooth:
1. Press the Center Select Key [ MENU ], then select Settings & Tools and press
the
Center Select Key [OK] .
2. Select
Bluetooth and press the Center Select Key [OK] .
3. Press the
Left Soft Key C [ Turn On/Turn Off ].
You can also turn Bluetooth on/off through MY SHORTCUTS by pressing the Directional
Key
B right in idle mode.
ADD NEW DEVICE
Pairing is the process that allows the handset to locate, establish and register a 1-to-1
connection with the target device.
1. Press the Center Select Key [ Menu ], then select Settings & Tools and press
the
Center Select Key [OK] .
2. Select
Bluetooth and press the Center Select Key [OK] .
3. Select
Add New Device and press the Center Select Key [OK] .
4. The handset will prompt you with the following message on the screen:
PLACE DEVICE YOU ARE CONNECTING TO IN DISCOVERABLE MODE . Press
the
Center Select Key [OK] .
5. The device will appear in the
Add New Device menu. Select the device to pair
to and press the
Center Select Key [ PAIR ].
6. If applicable, the handset may prompt you for the password. Consult the
Bluetooth® accessory (sold separately) instructions for the appropriate passkey
(typically 0000. 4 zeroes). Enter the passkey and press the
Center Select Key
[OK]
.
You do not need to input the passkey for pairing when the passkey of the Bluetooth®
Headset or hands-free kit is 0000.
7. The handset will prompt you with the following message on the LCD screen:
Before Connecting To [Device Name] . If you would like to always confirm
before connecting to the Bluetooth device, select
Always Ask , then press the
Center Select Key [OK] . Then the handset will prompt you with the message
“
Connect To [Device Name] ?” Select Yes . If you do not wish to confirm every
time before connecting to the Bluetooth device, select
Always Connect , then
press the
Center Select Key [OK] .