Operation Guide

Having Images Shot with the
Camera Sent to a
Smartphone Automatically
After registering the camera on the Gʼz EYE
app and configuring wireless LAN settings,
you
can configure settings so images shot with
the camera are automatically sent to a
smartphone.
1. Start up the “Gʼz EYE” app and establish
a wireless LAN connection between the
camera and smartphone.
l
Establishing a Wireless LAN
Connection
2. On the top screen, tap “Setting”.
3. Tap
“Wireless Settings”.
4. For the “Auto Send” item setting, select
“On”.
5. On the camera, enter the REC mode and
shoot.
The recorded images will be sent to the
smartphone.
●
If there is no wireless LAN connection
between the camera and smartphone,
a connection will be established and
image
send will start automatically after
the images are shot.
●
If a Controller With LCD is connected
with the camera, image send will start
when the controller enters its sleep
mode.
Important!
●
Some camera recording modes may
not allow auto send of images.
Note
●
Auto Send cannot be enabled unless
the camera is registered on the Gʼz
EYE app.
●
Both a Bluetooth wireless technology
and wireless LAN connection are
required between the camera and
smartphone to auto send camera
images.
●
Images shot while the camera’s
“Auto
Send” setting is “On” will be sent to the
smartphone, even if the “Auto Send”
setting is changed to “Off” before the
images are sent.
Configuring Shooting
Conditions
1. Start up the “Gʼz EYE”
app and establish
a wireless LAN connection between the
camera and smartphone.
l
Establishing a Wireless LAN
Connection
2. On the top screen, tap “Shooting with the
App”.
3. Tap
.
This will display the REC menu screen.
4. Swipe the screen image upwards and
downwards until you find the item whose
setting you want to change. Next, swipe
left and right to change the setting.
5. When
the setting is the way you want, tap
“OK”.
Viewing Images in
Camera Memory
You can use the procedure below to view
images in camera memory on a smartphone,
and manually send images from the camera
to the smartphone.
1. Start up the “Gʼz EYE” app and establish
a wireless LAN connection between the
camera and smartphone.
l
Establishing a Wireless LAN
Connection
2. On the top screen, tap “Viewing Images
with the App”.
This will display the Play Screen (Multi
Image View).
●
Play Screen (Multi Image View)
③
④
②
①
⑤
A
button
Returns to the top screen.
B
Displayed image type
Use this setting to specify the type of
images you want to display
C
Images
Shows images in camera memory.
D
Remote Capture button
Switches to the Remote Capture screen
for recording of images with the camera.
E
Battery status
Shows the camera’s battery status.
Gʼz EYE
6