Operation Guide

Gʼz EYE App Top Screen
Starting up the Gʼz EYE app will display the
top screen shown below.
●
Top Screen
②
③
④
①
⑧⑦⑥⑤
A
Shooting with the App
Tap to enable remote control of camera
shooting from a smartphone.
l
Using the Gʼz EYE App to Shoot
Images
B
Viewing Images with the App
Tap to view images stored in camera
memory and send them to a smartphone.
l
Viewing Images in Camera Memory
C
Connection status
Shows the status of the connection
between the camera and smartphone.
Tapping here toggles the camera and
smartphone between connected and
disconnected.
l
Connecting to a Camera
D
Shooting with the Camera or an Option
Tap when you want to shoot with the
camera or an optional controller.
l
Shooting with the Camera or an
Optional Controller
E
Setting
Tap to configure settings of the Gʼz EYE
app, camera, etc.
F
Guide
Tap to display the Gʼz EYE app user’s
guide.
G
Scene
Start up the Scene app
H
EDIT APP
Tap to start up a movie editing app.
Connecting to a
Camera
This section explains how to connect the
camera with a smartphone. The connection
method
you need to use depends on whether
or not the smartphone you are using supports
Bluetooth
®
wireless technology.
Bluetooth wireless technology
smartphone
l
Registering the Camera on the Gʼz EYE
App
Non-Bluetooth wireless technology
smartphone
l
Establishing a Wireless LAN Connection
Note
●
The explanations in this section
include both camera and smartphone
operations. Icons are used to indicate
whether an operation should be
performed on the camera or
smartphone.
: Indicates a camera operation.
: Indicates a smartphone operation.
Registering the Camera on
the Gʼz EYE App
To use the camera with a Bluetooth wireless
technology capable smartphone, perform the
procedure below to register the camera on the
Gʼz EYE app.
●
After
registering the camera on the Gʼz EYE
app, turning on the camera will cause it to
connect automatically with the smartphone
using Bluetooth wireless technology.
Important!
●
Perform the procedure below after
enabling both the Wi-Fi and Bluetooth
settings of the smartphone.
1. Start up “Gʼz EYE” app.
●
If
this is the first time you are starting up
the app, a “LICENSE AGREEMENT”
and “Privacy Policy” will appear. Tap
“Agree”. This will display a screen that
explains app functions. You can scroll
through the information by swiping
display from left to right.
2.
Tap
“Start”.
●
If the Gʼz EYE top screen appears when
you start up the app, tap the following
items in sequence: “Setting” * “App
Settings” tab *“Camera
Registration”.
3.
Make sure that the camera is turned
off.
If the camera is on, hold down the
[POWER]
button for about two seconds to
turn it off.
4.
Hold down the [POWER] button for at
least six seconds.
The [STATUS] lamp will light amber and
the name of the camera to be registered
on the Gʼz EYE app will appear on the
smartphone display.
Flashing amber
5. Tap the name of the camera to be
registered.
This establishes a Bluetooth wireless
technology connection between the
camera and smartphone.
6.
Tap
“OK”.
This completes the registration
procedure.
7. Tap
“OK”.
This causes the Gʼz EYE app top screen
to appear, with
“Bluetooth” displayed in
red.
●
Next, establish a wireless LAN
connection between the camera and
smartphone.
l
Establishing a Wireless LAN
Connection
Gʼz EYE
2