Operation Guide

ManualsBrandsCasio ManualsDigital CamerasG'z EYE Ver.1

Contents

Introduction

What you can do with Gʼz EYE

Gʼz EYE App Top Screen

Connecting to a Camera

Registering the Camera on the Gʼz EYE App

Establishing a Wireless LAN Connection

Terminating a Connection

Checking the Connection Status

Unregistering a Camera

Shooting Images

Using the Gʼz EYE App to Shoot Images

Shooting Snapshots

Shooting a Movie

Shooting a Slow Motion Segment while

Recording a Movie

Shooting with High Speed CS

Shooting with Prerecord CS

Shooting a Time Lapse Movie

Shooting with the Camera or an Optional

Controller

Having Images Shot with the Camera Sent to

a Smartphone Automatically

Configuring Shooting Conditions

Viewing Images in Camera

Memory

Displaying Images

Displaying a Single Image

Simple Movie Playback

Multiple Image Operations

Configuring Camera Settings

Formatting Camera Memory

Resetting the Camera to Factory Defaults

Recording Precautions

Troubleshooting

Copyrights

MA1710-B

Introduction

This manual explains how to configure

settings and shoot images of a CASIO digital

camera using the Gʼz EYE app. For details

about basic camera operations, see the user

documentation that comes with it.

●

Read this first!

●

The contents of this User’s Guide are

subject to change without notice.

●

The contents of this User’s Guide have

been checked at each step of the

production process. Feel free to contact us

if you notice anything that is questionable,

erroneous, etc.

●

Any copying of the contents of this User’s

Guide, either in part or its entirety, is

forbidden. Except for your own personal

use, any other use of the contents of this

User’s Guide without the permission of

CASIO

COMPUTER CO., LTD. is forbidden

under copyright laws.

●

CASIO COMPUTER CO., LTD. shall not be

held liable for any damages or lost profits

suffered by you or any third party due to the

use of this application software.

●

CASIO COMPUTER CO., LTD. shall not be

held liable for any damages or lost profits

caused by loss of memory contents due to

malfunction, repair, or any other reason.

●

Note that the example screens and product

illustrations shown in this User’s Guide may

differ somewhat from the screens and

configuration of the actual product.

What you can do with Gʼz

EYE

Installing the Gʼz EYE app on your

smartphone and then establishing a

connection with your camera enables the

functions described below.

●

Shoot with the App

Remotely control and shoot with the camera

using a smartphone.

●

View Images with the App

View snapshots and movies stored in camera

memory, and copy them to a smartphone.

Viewing Images in Camera Memory

●

Auto Send Images to a Smartphone

Configure settings that cause images shot

with a camera that is registered on the Gʼz

EYE

app to send images shot with the camera

to the smartphone automatically.

Having

Images Shot with the Camera Sent

to a Smartphone Automatically

●

Shoot with the Camera or an Optional

Controller

After configuring camera settings with the Gʼz

EYE app, you can shoot images with the

camera,

or an optional Controller With LCD or

Remote Controller.

Shooting with the Camera or an Optional

Controller

●

Use the Scene App

Use the Gʼz EYE app to start up the Scene

app.

The

Scene app is an image management app

that lets you display images at high speed and

share albums with friends.

Gʼz EYE

Summary of content (10 pages)

PAGE 1
MA1710-B © 2017 CASIO COMPUTER CO., LTD. Gʼz EYE Contents Introduction What you can do with Gʼz EYE Gʼz EYE App Top Screen Connecting to a Camera Introduction This manual explains how to configure settings and shoot images of a CASIO digital camera using the Gʼz EYE app. For details about basic camera operations, see the user documentation that comes with it.
PAGE 2
Gʼz EYE Connecting to a Camera Gʼz EYE App Top Screen Starting up the Gʼz EYE app will display the top screen shown below. ● Top Screen ⑧ ⑦ ⑥ ⑤ This section explains how to connect the camera with a smartphone. The connection method you need to use depends on whether or not the smartphone you are using supports Bluetooth® wireless technology.
PAGE 3
Gʼz EYE Establishing a Wireless LAN Connection Use the procedure below to establish a wireless connection between the camera and a smartphone. Note ● ● Turn on your smartphone’s Wi-Fi before connecting. The operation you need to perform depends on the type and setup of your smartphone. If you are unable to connect, check to make sure that your smartphone’s Wi-Fi is turned on.
PAGE 4
Gʼz EYE Shooting Images You can configure shooting settings and shoot images using a smartphone, the camera, or an optional controller. Images you shoot are saved in camera memory. Using the Gʼz EYE App to Shoot Images You can use the Gʼz EYE app to configure shooting settings and to shoot images. Note that camera button operations or an optional controller cannot be used to shoot images while you are shooting images with the Gʼz EYE app. 1.
PAGE 5
Gʼz EYE Shooting a Slow Motion Segment while Recording a Movie Dramatic Slow Motion can be used during movie recording to switch to slow motion recording for a specific period. You can highlight specific portions of a movie by recording them in slow motion. You can use the recording setting screen items below to specify the slow motion start point and duration. ー Slow Motion Operation ー Slow Motion Time l Configuring Shooting Conditions ● 1.
PAGE 6
Gʼz EYE Having Images Shot with the Camera Sent to a Smartphone Automatically After registering the camera on the Gʼz EYE app and configuring wireless LAN settings, you can configure settings so images shot with the camera are automatically sent to a smartphone. 1. Start up the “Gʼz EYE” app and establish a wireless LAN connection between the camera and smartphone. l Establishing a Wireless LAN Connection 2. On the top screen, tap “Setting”. 3. Tap “Wireless Settings”. 4.
PAGE 7
Gʼz EYE Displaying Images F Send button Sends the image to the smartphone. Displaying a Single Image To change to the Single Image View of one of the images on the Play Screen (Multi Image View), tap the desired image. You can scroll through images on the Single Image View by swiping the screen left or right. G Protect button Protects the image. ● Snapshot I Battery status Shows the camera’s battery status.
PAGE 8
Gʼz EYE Multiple Image Operations 1. On the Play Screen (Multi Image View), tap of the thumbnail of the image you want to select. 2. Tap the function you want to perform on the selected image. : Deletes the image from camera Formatting Camera Memory If a memory card is loaded in the camera, this operation will format the memory card. If no memory card is loaded, it will format built-in memory. 1. Tap “Format”. 2. Tap “OK” twice as instructed by the text that appears on the screen. memory.
PAGE 9
Gʼz EYE Troubleshooting Q3 The wireless LAN connection is Is the lens dirty? Connect Is there a wireless LAN connection between the smartphone and camera? technology connection between the camera and smartphone. Does the smartphone support Bluetooth wireless technology? Connection may have been lost due to interference caused by a nearby microwave oven, cordless phone, or other wireless device. Move the camera away from the device causing the problem.
PAGE 10
Gʼz EYE Copyrights Play Copy image Q1 I don’t see any images when I tap Q1 Auto Send does not send movies to Is there a wireless LAN connection between the camera and smartphone? Auto Send does not send movie files to the smartphone. Use the functions below to send movie files. l Displaying Images l Multiple Image Operations “Viewing Images with the App” on the smartphone.