User manual
Table Of Contents
- Watch Features
- Contents
- Safety Precautions
- Introduction
- Package Contents
- Component Names
- Getting Ready for First Use
- Turning Power On or Off, and Restarting
- Initial Settings and Fastening the Watch to Your Wrist
- Basic Button and Display (Touch Screen) Operations
- Basic Functions
- Using the “DIGITAL” Watch Face
- Quick Recall of Main Functions (CASIO's APPS)
- Selecting an Activity for Measurement
- Download Map and Import Route
- Using a Different Watch Face
- Reducing Power Consumption (Timepiece)
- What you can do when not connected with a phone
- Troubleshooting
- Precautions During Use
- User Maintenance
- Other Precautions
- Main Specifications
- Supplementary Information
STEP 1: Charge the watch
Be sure to charge the watch before using it.
Use the charger cable that comes with the watch to charge using a USB-AC
adaptor, or by connection to a computer or other device.
●
Note that the setup of a computer may not support charging from its USB
port.
Connect to a USB (Type A) port
●
Make sure the charger cable connector is oriented correctly when plugging
it into a USB port.
Charger cable
(included with watch)
USB (Type A) port
Voltage: 5 V
Current: 0.5A min.
The connection is magnetic.
Important!
●
The USB-AC adaptor or other USB power supply device you use must
meet certain specifications. Do not use an inferior adaptor or device that
does not meet the required specifications. Doing so can cause
malfunction and breakdown of the watch and USB power supply device.
Also note that use of a USB-AC adaptor may be subject to local
standards imposed by the country where you are located. CASIO
COMPUTER CO., LTD. shall be held in no way liable for any malfunction
or break down of the watch and/or USB power supply device caused by
use of an inferior adaptor or device that does not meet the required
specifications.
EN-25