User manual
Table Of Contents
- Basic Operations
- Time Adjustment (GPS, Time Calibration Signal)
- Using Mobile Link with a Mobile Phone
- Adjusting Time Settings Manually
- World Time
- Stopwatch
- Timer
- Alarms
- Illumination Light
- Adjusting Hand and Day Indicator Alignment
- Moving to Another Time Zone
- Other Information
- Troubleshooting
Map Data Source
This watch uses the map database of Tokyo
Cartographic Co., Ltd.
Supported Phone Models
For information about supported phone
models, visit the CASIO Website.
http://world.casio.com/os_mobile/wat/
Specifications
Accuracy at normal temperature :
±15 seconds per month average when time
adjustment by time calibration signal receipt
or by communication with a phone is not
possible.
Timekeeping :
Hour, minute, second, day (2000 to 2099
full auto calendar), day of the week
Signal Receive Functions :
GPS
signals: Auto Receive, manual receive
Time calibration signal: Auto Receive
Auto transmitter selection (for JJY, MSF/
DCF77)
Receivable call signs:
JJY (40kHz/60kHz), BPC (68.5kHz),
WWVB (60kHz), MSF (60kHz), DCF77
(77.5kHz)
Last reception result display
Automatic and manual switching between
standard time and summer time.
Mobile Link :
Auto Time Correction
Time setting adjusted automatically at
preset time.
Auto Summer Time Switching
Automatic switching between standard
time and summer time.
Hand alignment correction
Data Communication Specifications
Bluetooth
®
Frequency Band: 2400MHz-2480MHz
Maximum Transmission: 0 dBm (1 mW)
Communication range: Up to 2 meters
(depends on environment)
World Time :
Current time in 39 time zones * and
Coordinated Universal Time (UTC) time
display, summer time auto switching
* Subject to updated by connection
between the watch and a phone.
Stopwatch :
Measurement unit: 1 second
Measuring capacity: 23:59’59” (24 hours)
Measurement function: Elapsed time
Timer :
Setting unit: 1 minute
Countdown range: 24 hours
Countdown unit: 1 second
Alarm :
Setting units: Hours, minutes
Other :
LED light; auto hand position correction;
Power Saving; Low Battery Alert; Airplane
Mode (disables data communication)
Power Supply :
Solar panel and one rechargeable battery
Battery operating time: Approximately 6
months
Conditions:
Not
exposed to light under the conditions
below.
GPS time information receive
(approximately 10 seconds): 1 operation/
2 days
GPS location information receive
(approximately 45 seconds): 1 operation/
month
Light: 1 operation/day
Alarm: 1 operation/day
Specifications are subject to change without
notice.
Mobile Link Precautions
●
Legal Precautions
●
This watch complies with or has received
approval under the radio laws of various
countries and geographical areas. Using
this watch in an area where it does not
comply with or has not received approval
under applicable radio laws may be a
criminal
offense. For details, visit the CASIO
Website.
http://world.casio.com/ce/BLE/
●
Use of this watch inside of aircraft is
restricted under the aviation laws of each
country.
Be sure to follow the instructions of
airline personnel.
●
Precautions when using Mobile Link
●
When using this watch in combination with
a phone, keep the watch and phone close
to each other. A range of two meters is
recommended as a guideline, but the local
environment (walls, furniture, etc.), the
structure
of a building, and other factors may
require a much closer range.
●
This
watch can be affected by other devices
(electrical devices, audio-visual equipment,
office equipment, etc.) In particular, it can be
affected by operation of a microwave oven.
The watch may not be able to communicate
normally with a phone if a microwave oven
is operating nearby. Conversely, this watch
may cause noise in radio reception and the
video image of a TV.
●
Bluetooth of this watch uses the same
frequency band (2.4 GHz) as wireless LAN
devices, and use of such devices in close
proximity of this watch may result in radio
interference,
slower communication speeds
and noise for the watch and the wireless
LAN device, or even communication failure.
●
Stopping
Radio Wave Emission by This
Watch
The watch is emitting radio waves whenever
the second hand is pointing to “C”.
Even
if the second hand is not pointing at “C”,
the watch will automatically attempt to
connect with a phone four times a day to adjust
its time settings.
When in a hospital, on an aircraft, or in any
other
area where the use of radio waves is not
allowed, use the operations below to stop
radio wave generation.
●
Stopping Radio Wave Generation
Press
any button to terminate the Bluetooth
connection.
30 30
After disconnectionConnected
●
Disabling Auto Time Adjustment
Configure
G-SHOCK Connected settings to
disable synchronization between the watch
and phone.
l
Using the Watch in a Medical Facility or
Aircraft
Operation Guide 5502
21










