User manual

Basic Operations
This section provides an overview of the watch
and its operations.
Note
●
The illustrations included in this
operation guide have been created
to facilitate explanation. An
illustration may differ somewhat
from the item it represents.
Watch Face Items
⑥
⑧
⑨
⑩
⑪
⑦
②
①
③
④
⑤
A
Airplane Mode mark
While the watch is in the Airplane Mode, the
mode hand points to h.
B
Latitude
Shows the approximate latitude of your Home
City or World Time City.
C
Battery level
The current charge level is temporarily
indicated
by the mode hand after you enter the
Timekeeping Mode.
D
Summer time setting
The mode hand points to the summer time
setting for the currently selected Home City.
E
Signal
receive status, location information
availability
When checking the last receive result :
The mode hand indicates the information that
was received or acquired for the last time
adjustment.
“P”: GPS signal time or phone time information
and location information
“N”: GPS signal time information or time
calibration signal
When setting the Home City or World Time
City :
The mode hand indicates whether or not
location information is available for the Home
City or World Time City.
“P”: Location information available
“N”: Location information not available
F
Alarm settings
In the Alarm Mode, the second hand indicates
if the alarm is enabled or disabled.
“ON”: Alarm enabled
“OFF
”: Alarm disabled
G
RC mark
The second hand points to this mark while
calibration signal reception is in progress.
H
Last signal receive result
The second hand points to the letter that
indicates
the result of the last time adjustment
operation by receipt of a signal or connection
with a phone.
“Y(YES)”: Last time adjustment operation
successful.
“N(NO)”: Last time adjustment operation
failed.
I
C mark
The second hand points to this mark while
there is a connection between the watch and
a phone.
J
T (Time) mark
The second hand points to this mark while
GPS (time information) signal reception is in
progress.
K
T+P mark
The second hand points to this mark while
GPS
(location information) signal reception is
in progress.
Navigating Between Modes
Your watch has the modes shown below.
CC
CC
CC
30
Bluetooth connection
(Approximately
2.5 seconds)
Alarm Mode
Timer Mode
Stopwatch Mode
Timekeeping Mode
Use the (C) button to navigate between
modes.
Hold down (C) for at least one second to return
to the Timekeeping Mode.
To connect with a phone, hold down (C) for
about 2.5 seconds.
Operation Guide 5502
2