User manual

Specifying a World Time City
Use the procedure in this section to select a
World Time city. If you are in an area that
observes summer time, you can also enable
or disable summer time.
Note
●
The initial factory default summer
time setting for all cities is
“AT
(AUTO)”. In many cases, the “AT
(AUTO)” setting lets you use the
watch without switching between
summer time and standard time.
1.
Pull out the crown to the first click.
The second hand will move to the
currently selected World Time City.
You can check the approximate latitude
and longitude of your current location of
your World Time City.
30
Crown
Latitude
Longitude
World Time City
●
Press (A) and the mode hand will
indicate whether or not location
information about your current World
Time City is available.
“
P”: Available
“N”: Not available
30
2.
Rotate the crown to change the World
Time City.
The small hour and minute hands will
indicate
the current time in the World Time
city you selected.
30
Crown
World Time hour (24-hour)
World Time hour and minute
●
Pressing (B) will cause the mode hand
to move to the current summer time
setting.
30
●
“AT (AUTO)”
The watch switches between standard
time and summer time automatically.
●
“
STD”
The watch always indicates standard
time.
●
“
DST”
The watch always indicates summer
time.
3.
Hold down (B) for about one second to
change the summer time setting.
●
Each time you hold down (B) for about
one second, the summer time setting
will cycle to the next available option.
4.
Push the crown back in.
Note
●
You cannot switch between “STD”
and “DST
” while “UTC” is selected
as the city.
Changing the World Time
Setting in 15-minute Steps
If the city you want is not available on the
watch, you can use the procedure below to
configure World Time settings.
1.
Pull out the crown to the first click.
This will cause the second hand to move
to the current World Time time zone. The
disk will indicate the approximate
longitude while the mode hand will
indicate the approximate latitude.
30
Crown
Latitude
Longitude
World Time City
2.
Hold down (C) for about one second.
This will cause the mode hand to move to
l.
30
3.
Rotate the crown to change the time and
day settings.
The World Time setting change in 15-
minute increments.
30
4.
Push the crown back in.
Operation Guide 5502
16