User manual

Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch.
●
If
the watch is not paired with the phone you
want to connect with, perform the procedure
under “C Pair the watch with a phone.” to
pair them.
1.
Move
the phone close to (within one meter
of) the watch.
2.
X While
the second hand is not pointing to
“C”, hold down (C) for about 2.5 seconds.
This causes the second hand to move to
“C”
and establishes a connection
between the watch and phone.
●
The second hand will point to
“N” if
connection fails for some reason.
Important!
●
If you have problems establishing a
connection, it could mean that G-
SHOCK Connected is not running
on
the phone. On the phone’s home
screen, tap the “G-SHOCK
Connected” icon. After the app starts
up, hold down the watch’s (C) button
for about 2.5 seconds.
Note
●
The connection will be terminated if
you
do not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with
G-SHOCK Connected: “Watch
settings”n“Connection time”. Next,
select a setting of 3 minutes, 5
minutes, or 10 minutes.
Disconnecting from a Phone
Pressing any button terminates the Bluetooth
connection
and returns the second hand to its
normal operation.
30 30
After disconnectionConnected
Unpairing
1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
30 30
After disconnectionConnected
2.
Y On the Home Screen, tap the “G-
SHOCK Connected
” icon.
3.
Y Perform the operation shown on the
phone screen to unpair.
Note
●
If
you are unable to re-pair the watch
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Pull out the crown to the second
click.
30
Crown
B X Hold down (D) for about 10
seconds.
This deletes the pairing information.
The second hand will point to
“C”.
C X Push the crown back in.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
C Pair the watch with a phone.
Note
●
If your previous phone is near the
watch
while you are trying to pair with
a new phone, the watch will pair with
the previous phone, which makes it
impossible to pair with the new
phone. If this happens, use the
procedure below to delete the
previous pairing information from the
watch. Also, unregister the watch
from the phone you will no longer
connect with.
A X Pull out the crown to the second
click.
30
Crown
B X Hold down (D) for about 10
seconds.
This deletes the pairing information.
The second hand will point to
“C”.
C X Push the crown back in.
Operation Guide 5502
13