For fx-CG500 fx-CG500 Manager Subscription (for Windows®, for Macintosh) User’s Guide CASIO Education website URL https://edu.casio.com Manuals are available in multi languages at https://world.casio.
Getting Started • You can use fx-CG500 Manager to develop programs and eActivities using the same commands as those available on the fx-CG500. You can store your programs and eActivities on your computer. • fx-CG500 Manager provides the following capabilities. · fx-CG500 emulation, which lets you perform fx-CG500 operations on your computer · fx-CG500 emulation screen capture (to the clipboard) and screen printing · Copy and paste of data (text, values, expressions, etc.
System Requirements Windows Operating Systems: Windows 7 (32-bit/64-bit), Windows 8.1 (32-bit/64-bit) (Desktop UI), Windows 10 (32-bit/64-bit) Your hardware configuration needs higher than functionalities that operating system recommends. Computer: Computer with one of the Windows operating systems pre-installed (Excluding computers with an upgraded operating system and self-built computers.
Contents Chapter 1 Installing, Uninstalling or Updating the Software .................EN-4 fx-CG500 Manager Data ................................................................................EN-5 Chapter 2 Using the fx-CG500 Manager ..................................................EN-6 fx-CG500 Manager Overview .........................................................................EN-6 fx-CG500 Manager Operations ......................................................................
Chapter 1 Installing, Uninstalling or Updating the Software The installation procedure is slightly different for Windows and Mac OS. Perform installation in accordance with the instructions that appear on your computer screen. Installing k To install fx-CG500 Manager 1. On your computer, double-click the fx-CG500 Manager application EXE file. 2. Perform operations as instructed by the text that appears on the screen. Uninstalling Windows Use Windows Control Panel to uninstall the software. Mac OS 1.
Starting Up and Quitting fx-CG500 Manager k To start up and quit fx-CG500 Manager 1. Windows: On your computer’s desktop, double-click “fx-CG500 Manager”. Mac OS: In the “Applications” - “CASIO” - “fx-CG500 Manager Subscription” folder, double-click “fx-CG500ManagerSubscription”. • This starts up fx-CG500 Manager. 2. On fx-CG500 Manager, perform the management tasks you want. 3.
Chapter 2 Using the fx-CG500 Manager Note For details about fx-CG500 applications and operations, see the fx-CG500 User’s Guide. fx-CG500 Manager Overview The fx-CG500 Manager puts a virtual fx-CG500 on your computer screen, which you can use to perform almost all of the operations that are available on your fx-CG500. This section explains the differences between fx-CG500 Manager operations and the fx-CG500 unit, and among the three fx-CG500 Manager modes.
fx-CG500 Manager Display Mode The fx-CG500 Manager has three display modes: a Resizable Mode, a Landscape Mode and a Fixed-size Mode. • You can use the Landscape Mode while any one of the following is displayed: Application Menu, or the Main, Graph & Table, Conics, or Physium application. • The Resizable Mode/Landscape Mode provides functionality that is virtually identical to that as the fx-CG500, but in a typical Windows/Mac OS operating environment.
Mac OS Resizable Mode Landscape Mode Fixed-size Mode Q To select the display mode Right-click anywhere within the fx-CG500 Manager, and then click [Resizable Mode], [Landscape Mode] or [Fixed-size Mode] on the shortcut menu that appears.
fx-CG500 Manager Operations This section explains the operations you can perform on the Resizable Mode, Landscape Mode and Fixed-size Mode screens of the fx-CG500 Manager. Computer Keyboard Operations The following are the operations you can perform on your computer keyboard to control the fxCG500 application that is currently running in the fx-CG500 Manager. • Alphanumeric input • Cursor key operations (The cursor keys of your computer correspond to the fx-CG500 cursor keys.
Q To paste text from the clipboard into the fx-CG500 Manager 1. In other applications, copy the text you want to the clipboard. 2. On the fx-CG500 Manager, open the fx-CG500 application into which you want to paste the clipboard text. 3. Right-click anywhere within the fx-CG500 Manager, and then click [Paste Special] on the shortcut menu that appears. • This pastes the text on the clipboard into the fx-CG500 Manager.
Q To open an existing vcp file using drag and drop Drop the vcp file into the fx-CG500 Manager. Q To open an existing vcp file using the menu command 1. Right-click anywhere within the fx-CG500 Manager, and then click [File] - [Open] on the shortcut menu that appears. • This displays the Open dialog box. 2. On the dialog box, select the file you want to open and then click [Open]. • This opens the file you selected and makes it the active document.
Home Folder The home folder is where fx-CG500 Manager creates your default document. You can also use the home folder as a fx-CG500 Storage area. Storing an XCP, VCP, C2P, C2B, or C2A file in the fx-CG500 Storage area will make it available for use by fx-CG500 Manager. For details about the Storage area and XCP/VCP/C2P/C2B/C2A files, see the fx-CG500 User’s Guide. By default, the home folder is located in Documents\CASIO\fx-CG500 Manager. Q To change the home folder 1.
Using fx-CG500 Manager in the Resizable Mode/ Landscape Mode Resizable Mode/Landscape Mode Screen Structure The following shows the structure of the fx-CG500 Manager in the Resizable Mode/Landscape Mode.
Resizable Window/Landscape Window Note The Resizable Window size can be changed by clicking border and then dragging it to the size you want. Adjust the Resizable Window so the fx-CG500 OS screen is at least 320×528. Floating Menu Bar* The menu bar has five menus: File, Edit, Applications, Window, and Help. The menu bar “floats”, which mean that you can move it around independent of the Resizable Window/Landscape Window (Windows only).
Changing the fx-CG500 OS Screen Zoom Setting (Zoom) To change the fx-CG500 OS screen zoom setting, right-click anywhere within the window, and then click [Zoom] - [Normal], [Zoom] - [Large], or [Zoom] - [Xlarge]. [Zoom] - [Normal] [Zoom] - [Large] Note You can also change the zoom setting by clicking [Zoom] - [Normal], [Zoom] - [Large], or [Zoom] [Xlarge] on the floating menu bar’s [Window] menu.
Displaying Key Palettes Clicking [Window] - [Palettes] on the floating menu bar will display a sub-menu of key palettes. Click a key palette name to display it. Each key palette can be opened, closed and repositioned independently. [General Math] [Math] [2D Math] [Symbols] [2D Math ADV] [Variables] [International Characters] Note You can also display a soft keyboard by clicking the [Keyboard] button on the function bar, just like on your fx-CG500.
Generating MathML Data fx-CG500 Manager can output algebraic expressions and text you input with the Main application, eActivity application, or other application as a MathML file (.mml). You can also copy algebraic expressions and text as MathML data (content, presentation, or combined format) to the clipboard. Q To export a selected algebraic expression to a MathML file Example: To output an algebraic expression input with the Main application to a MathML file 1.
3. Click the sub-menu item you want. To copy data using this type of MathML markup: Select this option: Content • Content markup captures the mathematical structure. Content Presentation • Presentation markup captures notational structure. Presentation Combined • Combined uses content markup whenever possible. Otherwise, it uses presentation markup. Combined • Please consult the Internet or other publications for full details about MathML content markup and presentation markup.
Copying an Entire eActivity (Windows only) You can copy the entire content of an eActivity that is currently opened with the eActivity application to the clipboard. The format of the copied data depends on whether it comes from a text row, calculation row, or strip. text row Copied as Unicode text. Since a natural display expression that was input with the 2D Keyboard into a text row is copied as Unicode text, the natural display format is lost. Text rows can be edited within other applications.
3. Click the sub-menu item you want. To specify this option: Select this option: Calculation rows copied as actual size (×1) bitmaps ×1 Calculation rows copied as double size (×2) bitmaps ×2 • Clicking ×1 or ×2 copies all of the content of the currently open eActivity to the clipboard. • You can paste the copied text and bitmaps into WordPad or any other application that supports text editing and bitmaps.
Q [File] Menu Commands To do this: Select this menu item: Create a new vcp file* New Open an existing vcp file* Open Save changes to the current vcp file Save Save the current vcp file with a new name Save As Clear Main memory Reset Change the home folder Change Home Folder Export selected math expressions and text to an mml file Export MathML Print the current screen (Windows only) Print 1 2 Reopen one of the four most recently opened files* 3 4
Q [Window] Menu Commands To do this: Select this menu item: Change to the Fixed-size Mode Fixed-size Mode Change to the Resizable Mode*1 Resizable Mode Change to the Landscape Mode*2 Landscape Mode Keep the fx-CG500 Manager Window and all of its sub-windows on top of all other windows Always on top Minimize the fx-CG500 Manager Window Minimize Change the fx-CG500 OS screen zoom setting to normal size Zoom - Normal Change the fx-CG500 OS screen zoom setting to large size Zoom - Large Change t
Using fx-CG500 Manager in the Fixed-size Mode LCD Window In the Fixed-size Mode, you can display only the screen portion (including the Icon Panel) of the fx-CG500 in a separate window, called the “LCD Window”. LCD Window Q To open the LCD Window Right-click anywhere within the fx-CG500 Manager, and then click [LCD Window] on the shortcut menu that appears. Q To close the LCD Window Windows: Click the Mac OS: Click the button in the upper right corner of the LCD Window.
Q Changing the LCD Window Zoom Setting Right-click anywhere within the LCD Window, and then click [Zoom] - [Normal], [Zoom] - [Large], or [Zoom] - [Xlarge].
Appendix fx-CG500 Manager Shortcut Keys Shortcut Key (Windows) Shortcut Key (Mac OS) Function Ctrl+b command+b Bold Ctrl+c command+c Copy Ctrl+x command+x Cut Ctrl+v command+v Paste Ctrl+i command+i Inputs imaginary unit Ctrl+p command+p Inputs π Ctrl+e command+e Inputs e Ctrl+a command+a Select all Ctrl+t command+t Inputs Ctrl+z command+z Undo Ctrl+r command+r Resize the active window Ctrl+k command+k Displays the keyboard Ctrl+n command+n Creates a new document
Expat, Release 1.95.8 (MIT/X license) Copyright © 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright © 2001, 2002, 2003 Expat maintainers.
The qtmain Library Copyright (C) 2015 The Qt Company Ltd. Contact: http://www.qt.io/licensing/ You may use this file under the terms of the BSD license as follows: “Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
ISO 2022-JP (JIS) Text Codec ISO/IEC 2022 is an ISO standard specifying: - a technique for including multiple character sets in a single character encoding system, and - a technique for representing these character sets in both 7 and 8 bit systems using the same encoding. ISO-2022-JP is a widely used encoding for Japanese. Copyright (C) 1999 Serika Kurusugawa. All rights reserved.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in these Data Files or Software without prior written authorization of the copyright holder. Included in util/unicode/data, tests/auto/qtextboundaryfinder/data and tests/auto/qchar Parts of the makeqpf tool Macros for building Qt files Copyright 2005-2011 Kitware, Inc. All rights reserved.
Qt will by default use the GNU libstdc++ library which is distributed as part of the Google Android NDK. Qt Creator will copy this library into the .APK for any Qt-based Android app. The library will then be loaded by the app on start-up to meet the run-time requirements of Qt.
Cosmin Truta libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn Randers-Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors Simon-Pierre Cadieux Eric S. Raymond Gilles Vollant and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement.
Paul Schmidt Tim Wegner The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc.
The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ITS USE AND OPERATION EITHER ALONE OR IN COMBINATION WITH OTHER PRODUCTS.
Copyright © 2001 Robert Penner All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
OpenGL ES 3.1 Headers Copyright (c) 2013-2014 The Khronos Group Inc.
LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.
Original SSLeay License ---------------------------------/* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */ Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to.
CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan SA1810-D © 2017 CASIO COMPUTER CO., LTD.
