User Manual

β-1

Examination Mode

The Examination Mode puts some limits on calculator functions, which allows it to be used

when taking an exam or test. Use the Examination Mode only when actually taking an exam or

test.

Entering the Examination Mode affects calculator operation as described below.

• The following modes and functions are disabled: eActivity mode, Memory mode,

E-CON4

mode, Program mode, vector commands, program commands (^ (output command),

: (multi-statement command), _ (carriage return)), data transfer, add-in applications, add-in

languages, storage memory access, user name editing, OS Update.

• User data (main memory) is backed up. The backed up data will be restored when you

exit the Examination Mode. Any data created during an Examination Mode session will be

deleted when the Examination Mode is exited.

u Entering the Examination Mode

1. Press !o(OFF) to turn off the calculator.

2. While holding down the c and h keys, also hold down the o key until the dialog box

shown below appears.

Note

The dialog box may not appear if you release the three keys too soon. If this happens,

perform the above procedure from step 1 again.

3. Press 1(Yes).

• Read the message on the dialog box that appears.

4. Press 2.

• This displays the dialog box shown below.

5. Press J.

• Only the settings below are saved before entering the Examination Mode.

Input/Output, Frac Result, Angle, Complex Mode, Display, Q1Q3 Type, Language, Function

menu language, Battery Type