User Manual

16-7

To recall 3D graph memory data

1. Press 4(3D-GMEM)2(RECALL).

2. On the pop-up window that appears, specify a 3D graph memory number (1 to 20) and then

press w.

Pressing bw, for example, recalls the data stored in 3D Graph Memory 1 (3DGMEM1).

Performing the recall operation replaces all of the current 3D graph function list contents

and 3D View Window settings with the recalled contents. The current data is deleted.

4. Template Selection Screen

On the 3D graph function list, press 3(TYPE) or d/e to display the template selection

screen.

Note

If you select a registered function and then press d/e, selecting the template of that

function will display the coefficient input screen with coefficients input.

Use f and c to select one of the templates listed below.

Line … Draws a line.

Plane … Draws a plane.

Sphere … Draws a sphere.

Cylinder … Draws a cylinder.

Inputting Template Coefficients

On the template selection screen, selecting a template and then pressing w will display

the coefficient input screen. Re-selecting a registered template will display the previous

coefficients.

The appearance of a coefficient input screen depends on the template.

After inputting coefficients, press 6(SET) to return to the 3D graph function list.

•