Versione software 2.02 Guida dell’utilizzatore

ε-32
Starting a Sampling Operation
• The screen shown below appears when CH1,
SONIC, or Mic is used as the trigger.
Pressing 1 advances to “4. Graphing”. Pressing w there returns to “3. Sampling”.
Sampled values are saved as Current Sample Data.
Graph screen does not show all sampled values, but only a partial preview.
•
When Mode = Sound
The following three graph types can be produced when Photogate-Pulley is being used.
1.
Time and distance graph
2.
Time and velocity graph
3.
Time and acceleration graph
Sample values are stored as List data only.
S
tarts Samplin
g
Starts Sampling
w1
w
• When Number of Samples = 1
•
When Number of Samples > 1
Input values. w
Mode Real-time Fast Normal Sound
Extended
Period
Clock
1. Data Logger Setup
2. Start Standby 3. Sampling 4. Graphing
w
• The screen shown below appears when CH1,
SONIC, or Mic is used as the trigger.
Pressing 1 advances to “4. Graphing”. Pressing w there returns to “3. Sampling”.
Sampled values are saved as Current Sample Data.
Graph screen does not show all sampled values, but only a partial preview.
•
When Mode = Sound
The following three graph types can be produced when Photogate-Pulley is being used.
1.
Time and distance graph
2.
Time and velocity graph
3.
Time and acceleration graph
Sample values are stored as List data only.
S
tarts Samplin
g
Starts Sampling
w1
w
• When Number of Samples = 1
•
When Number of Samples > 1
Input values. w
Mode Real-time Fast Normal Sound
Extended
Period
Clock
1. Data Logger Setup
2. Start Standby 3. Sampling 4. Graphing
w