User Manual

EN-19
To perform Key-Log auto play of a recorded key operation
When [Main Memory R/W: ON] is selected on the [KeyLog] menu
1. Click and then open the Key-Log file you want to play.
2. Click to start playback.
The next key to be played back is green*
1
.
Played key operations are
magenta*
2
.
The last key to be played is
framed in magenta.*
3
The next key to be played is framed in green*
1
.
*
1
Type B: orange
*
2
Type B: blue
*
3
Type B: The last played key is blue.
• Click to pause playback.
Click
to restart playback after pausing it.
3. To stop playback, click . Stopping playback causes all keys to return to their original colors.
Note
• Playback starts from the current cursor position.
• Each time playback comes to a Memory Character, the Main Memory contents that were stored
for that location are looked up, and playback then proceeds to the next operation using the looked
up contents.
• Current Main Memory contents are automatically backed up whenever you click
to start a
new Key-Log playback operation. This will allow you later to restore memory contents to what
they were before you started playback (if you want).
• Closing a Key-Log file causes the message “Backed up memory contents will be restored.” to
appear. You can specify whether you want Main Memory to be restored to the contents that were
automatically backed up when you started playback of the Key-Log file (see above).
• You can use the Options dialog box (page EN-23) to configure playback settings like the key
playback interval following a pause, the color of playback keys, etc.