User`s guide
Table Of Contents
- Getting Started
- Contents
- 1. Installing and Uninstalling fx-9860G Slim Manager PLUS
- 2. Screen Configuration
- 3. Emulator Mode and Key-Log Editor Mode
- 4. Emulating fx-9860G Slim Calculator Operation
- 5. Using the Emulator Key-Log
- 6. Configuring Options Dialog Box Setting
- 7. Other Functions
- 8. File Types Supported by fx-9860G Slim Manager PLUS
- 9. Differences between fx-9860G Slim Calculator and fx-9860G Slim Manager PLUS Functions
- 10. Using Screen Receiver to Display the Calculator Screen Image on Your Computer
- 11. Error Message Table
E-42
k Screen Receiver Menus
Important!
• If the calculator screen does not appear, try disconnecting the USB cable and then restart the
above procedure from the beginning. If the calculator screen still does not appear, check the
points described below.
Screen Receive Menu
Menu Toolbar Button Description
Start Displays the calculator screen image.
Stop Closes the calculator screen image.
Exit Exits Screen Receiver.
If this is the problem: Do this:
The USB cable is disconnected. Reconnect the USB cable.
There are multiple calculators connected. Disconnect the other calculators so there is
only one left connected.
There is another CASIO product connected
with a USB cable.
Disconnect the other CASIO product.
The message “!CESG502” appears on the
Device Manager screen which indicates that
the USB driver is not installed correctly.
Reinstall fx-9860G Slim Manager PLUS.
4
. Operate the calculator. When you do, the calculator screen image will change in real time on
your computer.
5
. You can enlarge the calculator screen image by clicking and reduce its size by clicking .
6
. To close the calculator screen image, click .
7
. Disconnect the USB cable.